Weldability of 9Cr‐1Mo‐Nb, V P91 steel intended for service in the power industry

References

• Orr , J and Burton , D . . ‘Development, current and future use of steel 91 . Proc seminar ‘The manufacture and properties of steel P91’ . November , Dusseldorf : EOCS .
   Google Scholar
• Bruhl , F and Haarman , H . 1989 . ‘The use of 9% chromium X10CrMoVNb 9.1 steel for short and long time applications, Part I’ . Grundwerkstoff, VGB Kraftwerkstechnik , 69 (12)
   Google Scholar
• Bendik , W , Haarman , K and Wellnitz , G . 1993 . ‘Properties of 9–12% chromium steels and their present and future use’ . VGB Kraftwerkstechnik , : 17
   Google Scholar
• Iseda , A Kubota , M . 1988 . ‘Application and properties of modified 9Cr‐1Mo steel tubes and pipe for fossil‐fired power plants’ . The Sumitomo Research ,
   Google Scholar
• Coussement , C , de Witte , M and de Backer , T . ‘Weldabiîity and high temperature behaviour of the modified 9%Cr steel grade 91 tube and pipe base materials and weldments’ . 1 As Reference
   Google Scholar
• Okabayashi , H and Kume , R . 1988 . ‘Effect of pre‐and post‐heating on weld cracking of 9Cr‐1Mo‐Nb‐V steel’ . Trans Jap Soc , 2 (2)
   Google Scholar
• Raschke , C , Bendick , W and Orr , J . ‘Physical properties, transformation behaviour and microstructure of grade T91’ . 1 As reference
   Google Scholar
• Lomzik , M . 1993 . “ ‘Investigation of phase transformations in metals which occur during simulated welding thermal cycles’ ” . Research report Instytut Spawalnictwa . (St‐35)
   Google Scholar
• Coussement , C and Dhooge , A . 1992 . ‘Evaluating weldability using weld simulation testing’ . Proc ‘Physical simulation’, Delft, International Symposium . 1992 .
   Google Scholar
• Zeman , M . 1993 . “ ‘Investigative potential of the thermo‐strain simulator designed at the Instytut Spawalnictwa, and its practical application’ ” . Research report Instytut Spawalnictwa . (Cd‐4)
   Google Scholar
• Ambs , E , Tolksdorf , E and Leich , K E . 1993 . ‘The use of X20CrMoV 12.1 steel for the hot working conditions in fresh steam transmission piping’ . VGB Kraftwerkstechnik , 73 (7)
   Google Scholar
• Kukula , P . “ ‘Investigation into the tendency of P91 steel to cracking at elevated temperatures, made on a thermo‐strain cycle simulator and carried out at the Welding Institute’ ” . Slask Polytechnic No. RMT 5–1351/93/94 . Diploma Thesis
   Google Scholar
• Sedek , P . 1993 . ‘Modification of the drilling method for the determination of residual stresses’ . Biuletyn Instytutu Spawalnictwa ,
   Google Scholar
• Hrivnak, I: ‘Guide to the welding and weldability of steels with up to 9%Cr for service at elevated temperatures’ IIW Doc IX‐1485–87
   Google Scholar
• Blume , R . “ ‘Improvements to the mechanical‐technological properties of welded CrMoVNb steels with 9%Cr through the optimisation of additives and welding parameters’ ” . Publ DVS 162/1994 .
   Google Scholar
• Dietrich , S and Heuser , H . 1994 . ‘Welding recommendations for 8% Cr P91 steel’ . Thyssen Co Information Data Sheet ,
   Google Scholar
• Brozda , J and Zeman , M . 1995 . ‘Investigation of the simulated heat affected zone in 9Cr‐1Mo‐Nb, V(P91) steel intended for service at elevated temperatures’ . Biuletyn Instytutu Spawalnictwa ,
   Google Scholar
• Zeman , M . 1994 . “ ‘Investigation of the weldability of 9Cr‐lMo‐Nb, V(P91) steel intended for service at elevated temperatures’ ” . Research report (Da‐78)(St‐51) Part 2 Instytut Spawalnictwa .
   Google Scholar