Modelling of pulsed current weld microstructures

References

• Grange . 1971 . ‘The rapid heat treatment of steel’ . Metall Trans , 2 : 65 – 78 .
   Web of Science ®Google Scholar
• Ivasishin and Lutjering . 1993 . ‘Structure and mechanical properties of high temperature titanium alloys after rapid heat treatment’ . Mater Sci Eng , A168 : 23 – 28 .
   Google Scholar
• Alberry and Feldstein . 1987 . ‘Weld repair of light water reactor boundary components’ . Weld J , : 33 – 42 .
   Google Scholar
• Davies and Garland . 1975 . ‘Solidification structures and properties of fusion welds’ . Int Met Rev , 20 : 83 – 106 .
   Google Scholar
• Gokhale , Tzavaras , Brody and Ecer . 1983 . “ ‘Grain structure and hot cracking in pulsed current GTAW of AISI 321 stainless steel’ ” . In ‘Grain refinement in castings and welds’ , The Metallurgical Society of AIME .
   Google Scholar
• Watanabe , Nakamura and Ei . 1987 . “ ‘Grain refinement of austenitic stainless steel weld by pulsed TIG welding’ ” . Doc. IIS/IIW IX‐460–87
   Google Scholar
• Patterson and Milewski . 1985 . ‘Cracking of GTA welds in Alloy 625 welded to 304L steel’ . Weld J , 8 : 227s – 231s .
   Google Scholar
• Weeter , Albright and Jones . 1986 . ‘Development of a weldability test for pulsed laser beam welding’ . Weld J , : 51s – 62s .
   Google Scholar
• Reynolds , Kerr , Fehrenbach , Bourque and Davidson . 1986 . “ ‘Cracking in pulsed laser welds in nickel based alloys, stainless steels and combinations of these’ ” . In ‘Advances in welding science and technology’ , 325 – 329 . ASM International .
   Google Scholar
• Yamamoto , Harada , Ueyama , Ogawa , Matsuda and Nakata . ‘Beneficial effect of low frequency pulsed MIG welding on grain refinement of weld metal and improvement of solidification crack susceptibility in aluminium alloy’ . Weld Int , 8 (7) 593 – 598 .
   Google Scholar
• Yamamoto , Harada , Ueyama and Ogawa . 1993 . ‘Study of low frequency pulsed MIG welding’ . Weld Int , 7 (1) : 21 – 26 .
   Google Scholar
• Vishnu , Ravi , Li and Easterling . 1991 . ‘Heat flow model for pulsed welding’ . Mat Sci Technol , 7 (7) : 649 – 659 .
   Web of Science ®Google Scholar
• Vishnu , Ravi and Easterling . 1993 . “ ‘Phenomenological modelling of heat flow and microstructural changes in pulsed GTA welds in a QT steel’ ” . In ‘Mathematical modelling of weld phenomena’ , The Institute of Materials .
   Google Scholar
• Arata , Matsuda , Nakagawa , Katayama and Ogata . 1977 . ‘Solidification crack susceptibility in weld metals of fully austenitic stainless steels (Report III): Effect of straining rate on cracking threshold in weld metal during solidification’ . Trans JWRI , 6 (2) : 37 – 46 .
   Google Scholar