Mathematical model of the heat source in gas-shielded TIG welding

References

• Sudnik , V A and Erofeev , V A . . ‘Mathematical model of arc consumable electrode welding’ . ‘Sixth Regional Scientific and Technical Conference: Advanced methods of engineering in heavy engineering’ . pp. 115 – 118 . Krasnoyarsk : Publ Regional Board of Mashprom .
   Google Scholar
• Tsao , K C and Wu , C S . 1988 . ‘Fluid flow and heat transfer in GMA molten pools’ . Welding Journal , : 70 – 75 . (3)
   Web of Science ®Google Scholar
• Pardo , E and Weckman , D C . 1989 . ‘Prediction of molten pool and reinforcement dimensions of GMA welds using a finite element model’ . Met Trans , 20B ( 12 ) : 937 – 947 .
   Google Scholar
• Dilthey , U . 1993 . ‘Numerische simulation des MAG-Schweis-sprozesses’ . Schweissen und Schneiden , : 148 – 153 . (3)
   Google Scholar
• Weiss , D . 1994 . “ ‘A model of temperature distribution and molten pool deformation during arc welding’ ” . In ‘Mathematical modelling of weld phenomena 2’ , Edited by: Cerjak , H . 35 – 43 . London : The Institute of Materials .
   Google Scholar
• Sudnik , V A . 1997 . “ ‘Modelling of the MAG process for the pre-welding planning’ ” . In ‘Mathematical modelling of weld phenomena 3’ , Edited by: Cerjak , H . 791 – 815 . London : The Institute of Materials .
   Google Scholar
• Sudnik , V A . 1995 . ‘MAGSIM software for analysis, optimisation and diagnostics of the process of welding thin sheet components with a consumable electrode in an active gas’ . Svar Proiz , : 19 – 24 . (3)
   Google Scholar
• Sudnik , V A and Rybakov , A C . 1990 . ‘Calculation-experimental moments of the moving arc of the non-consumable electrode in argon’ . Svar Proiz , : 32 – 34 . (11)
   Google Scholar
• Leskov , G I . 1970 . ‘Electric welding arc’ , Moscow : Publ Mashinostroenie .
   Google Scholar
• Lenivkin , V A . 1989 . ‘Technological properties of the welding arc in shielding gases’ , Moscow : Publ Mashinostroenie .
   Google Scholar
• Sudnik , V A and Ivanov , A V . . ‘The energy model of the MAG arc in the Ar + CO2 shielding mixture’ . ‘Proc of seminar: Physics of the arc and power sources’ . pp. 24 – 25 . Kiev : Publ International Association Svarka .
   Google Scholar
• Sudnik , V A and Ivanov , A V . 1995 . “ ‘Mathematical and computer models of the heat sources in MAG welding in gas mixtures’ ” . In ‘Systems for automatic control of production processes and expert systems in welding’ , 108 – 118 . Tula : Publ Tula State University .
   Google Scholar
• Knoch , R . 1989 . ‘Schweissdaten fur das MAG-Schweissen’ , 30 Munich : Publ SLV .
   Google Scholar
• Danielscu , H A and Pfender , E . 1980 . ‘Analysis of the anode boundary layer of high intensity arcs’ . Journal Appl Phys , 51 : 3149 – 3157 .
   Web of Science ®Google Scholar
• Ondrejcek , P . 1986 . ‘Statische Spannungsanaylse beim Schweissen unter Ar + 20% CO2 –Schutzgas’ . Mitteilungen (DDR) , : 490 – 498 . (5)
   Google Scholar
• Pokhodnya , I K and Suptel , A M . 1970 . ‘Heat content of droplets of electrode metal in CO2 welding’ . Avt Svarka , : 5 – 8 . (10
   Google Scholar
• Ando , K and Nishiguchi , K . 1968 . “ ‘Mechanism of formation of pencilpoint-like wire tip in MIG arc welding’ ” . In ‘Relationship between the temperature of molten drop wire extension and heat conductivity’ 212 – 156 . 10 IIW-Doc.
   Google Scholar
• Mayendorf , N and Nitsche , R . 1983 . ‘Die temperatur von Zusatzwerkstoffropfen beim MIG and MAG-Schweissen’ . ZIS-Mitteilungen (DDR) , : 213 – 220 . (3)
   Google Scholar
• Watkins , A D . . ‘Heat transfer in gas metal arc welding’ . ‘3rd Conf Recent Trends in Welding Science and Technology’ . pp. 19 – 23 . Metals Park, Ohio : ASM Int .
   Google Scholar
• Pomaska , H-U . 1989 . ‘MAG Schweissen –kein buch mit sieben siegelin’ , 43 Munich : Publ: Verlag G J Manz AG .
   Google Scholar
• Boswort , A G . 1991 . ‘Effective heat input in pulsed current GMAW with solid wire electrodes’ . Welding Journal , : 111 – 117 . (5)
   Web of Science ®Google Scholar
• Eichhorn , F and Niederhof , K . 1972 . ‘Streckenenergie als Kenngrossen des Warmeeinbringens beim mechanisierten Lichtbogentschweissen’ . Schweissen und Scheiden , : 399 – 403 . (10)
   Google Scholar
• Essers , W G and Walter , R . 1981 . ‘Heat transfer and penetration mechanisms with GMA and plasma-GMA welding’ . Welding Journal , : 37 – 42 . (2)
   Web of Science ®Google Scholar
• Knoch , R . 1985 . “ ‘Schweisskennwerte fur das MAG-Schweissen’ ” . In Dussel-dorf, DVS Berichte Vol. Band 91 , 42
   Google Scholar
• Sudnik , V A . 1997 . ‘Development and application of computer technologies of prediction of weld formation in arc welding’ . Svar Proiz , : 40 – 45 . (11)
   Google Scholar