The introduction of an environmental cooling method is proved by using a reduced tool life cycle time method

References

• Angioletti , M. , Di Tommaso , R. M. , Nimo , E. and Ruocco , G. 2003 . Simultaneous visualisation of flow field evaluation of local heat transfer by traditional impinging jets . J. Heat Mass Transfer , 46 : 1703 – 1713 .
   Web of Science ®Google Scholar
• Arsecularatne , J. A. , Fowle , R. F. , Mathew , P. and Oxley , P. L.B. 1996 . Prediction of tool life in oblique machining with nose radius tools . Wear , 1 : 220 – 228 .
   Google Scholar
• Arsecularatne , J. A. , Hinduja , S. and Barrow , G. 1992 . Optimum cutting condition for turned components . Proc. Instn Mech. Engrs. , 206 : 15 – 31 . Part B
   PubMedGoogle Scholar
• Ay , H. and Yang , W. J. 1998 . Heat transfer and life of metal cutting tools in turning . Int. J. Heat Mass Transfer. , 41 : 613 – 623 .
   Web of Science ®Google Scholar
• Byrne , G. 1987 . Thermoelectric signal characteristic and average interfacial temperatures in the machining of metals under geometrically defined conditions . Int. J. Machine Tools Mfg. , 27 : 215
   Google Scholar
• Cook , N. 1973 . Tool wear and tool life . ASME Trans, J. Engng. Ind. , 95 : 931 – 938 .
   Google Scholar
• Dae Hee , Lee , Young Suk , Chung and Moo Geun , Kim . 1999 . Turbulent heat transfer from a convex hemispherical surface to a round impinging jets . Int. J. Heat Mass Transfer , 42 : 1147 – 1156 .
   Google Scholar
• Dhar , N. R. , Paul , S. and Chattopadhyay , A. B. 2002 . Role of cryogenic cooling on cutting temperature in turning steel . J. Mfg Sci. Engng , 124 : 146 – 154 .
   Web of Science ®Google Scholar
• EL-Wardany , T. I. , Mohammed , E. and Elbestawi , A. 2000 . Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials . Int. J. Machine Tools Mfg , 36 : 611 – 634 .
   Google Scholar
• Hong , Shane Y. and Yucheng , Ding . 2001 . Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V . Int. J. Machine Tools Mf , 41 : 1417 – 1437 .
   Web of Science ®Google Scholar
• Kitagawa , T. , A. , Kubo and Maekawa , K. 1997 . Temperature and wear cutting tools in high-speed machining on Inconel 718 and Ti-6AI-6V-2Sn . Wear , 202 : 142 – 148 .
   Web of Science ®Google Scholar
• Mao-Yu , Wen and Kuen-Jang , Jang . 2003 . An impingement cooling on a flat surface by using circular jet with longitudinal swirling strips . J. Heat Mass Transfer , 46 : 4657 – 4667 .
   Google Scholar
• Meng , Q. , Arsecularatne , J. A. and Mathew , P. 2000 . Calculation of optimum cutting conditions for turning operations using a machining theory . Int. J. Machine Tools Mf. , 40 : 1709 – 1733 .
   Web of Science ®Google Scholar
• O'Sullivan , D. and Cotterell , M. 2001 . Temperature measurement in single turning point . J. Master. Proc. Tech. , 118 : 301 – 308 .
   Web of Science ®Google Scholar
• Oxley , P. L.B. 1989 . The Mechanics of Machining, An Analytical Approach to Assessing Machinability , Chichester : Ellis Horwood .
   Google Scholar
• Stirling liquid nitrogen production plant . Available online at: http://www.stirling.nl/sp/sp3.html (accessed 12 June 2005)
   Google Scholar
• Usui , E. , Shirakashi , T. and Kitigawa , T. 1978 . Analytical prediction of three dimensional cutting process (part 3): cutting temperature and crater wear of carbide tool . J. Trans. ASME , 100 : 236 – 243 .
   Web of Science ®Google Scholar
• Young , H. T. 1996 . Cutting temperatures to flank wear . Wear , 201 : 117 – 120 .
   Web of Science ®Google Scholar