207
Views
4
CrossRef citations to date
0
Altmetric
Articles

Control-integrated consumption graph-based optimisation method for energy reduction of machine tools with automated parameter optimisation

, &
Pages 1307-1316 | Received 31 Mar 2014, Accepted 20 Feb 2015, Published online: 23 Apr 2015

References

  • Abele, E., C. Eisele, and S. Schrems. 2012. “Simulation of the Energy Consumption of Machine Tools for a Specific Production Task.” In Leveraging Technology for a Sustainable World, edited by A. D. Dornfeld and B. S. Linke, 233–237. Berlin: Springer-Verlag.
  • Bittencourt, J. L. 2013. Selbstoptimierende Und Bedarfsgerechte Steuerungsstrategien Für Werkzeugmaschinen Zur Steigerung Der Energieeffizienz. 1st ed. Aachen: Apprimus-Verl.
  • Bundesministerium für Wirtschaft und Technologie, ed. 2013. Energie in Deutschland. Trends und Hintergründe zur Energieversorgung. http://www.bmwi.de/Dateien/Energieportal/PDF/energie-in-deutschland,property=pdf,bereich=bmwi2012,sprache=de,rwb=true.pdf
  • Dahmus, J., and T. Gutowski. 2004. “An Environmental Analysis of Machining.” Paper presented at the ASME 2004 International Mechanical Engineering Congress and Exposition, Anaheim, CA, November 13–19.
  • Diaz, N., and D. Dornfeld. 2012. “Cost and Energy Consumption Optimization of Product Manufacture in a Flexible Manufacturing System.” In Leveraging Technology for a Sustainable World, edited by A. D. Dornfeld and B. S. Linke, 411–416. Berlin: Springer-Verlag.
  • Dietmair, A., and A. Verl. 2008. “A Genergic Energy Consumption Model for Decision Making and Energy Efficiency Optimisation in Manufacturing.” In Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, edited by L. J. De Vin, 389–396. Skövde: University of Skövde.
  • DIN Deutsches Institut für Normung e.V. 2009. DIN EN ISO 14001:2009-11 Environmental management systems – Requirements with guidance for use. Berlin: Beuth Verlag GmbH.
  • Draganescu, F., M. Gheorghe, and C. V. Doicin. 2003. “Models of Machine Tool Efficiency and Specific Consumed Energy.” Journal of Materials Processing Technology 141 (1): 9–15. doi:10.1016/S0924-0136(02)00930-5.
  • Duflou, J., J. Sutherland, D. Dornfeld, C. Herrmann, J. Jeswiet, S. Kara, M. Hauschild, and K. Kellens. 2012. “Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach.” CIRP Annals – Manufacturing Technology 61 (2): 587–609. doi:10.1016/j.cirp.2012.05.002.
  • Eberspächer, P., H. Haag, R. Rahäuser, J. Schlechtendahl, A. Verl, T. Bauernhansl, and E. Westkämper. 2012. “Automated Provision and Exchange of Energy Information throughout the Production Process.” In Leveraging Technology for a Sustainable World, edited by A. D. Dornfeld and B. S. Linke, 381–386. Heidelberg: Springer-Verlag.
  • EnergieAgentur. NRW GmbH, 2012. “Strompreise in Deutschland.” Düsseldorf. http://www.energieagentur.nrw.de/infografik/grafik.asp?RubrikID=3165
  • Frigerio, N., A. Matta, L. Ferrero, and F. Rusinà. 2013. “Modeling Energy States in Machine Tools: An Automata Based Approach.” In Re-engineering Manufacturing for Sustainability, edited by A. Nee, B. Song, and S.-K. Ong, 203–208. Singapore: Springer.
  • Gildemeister, A. G., 2012. Dübendorf. http://en.dmgmoriseiki.com/sites/en/energyefficiency/dmg-energy-saving
  • Gontarz, A., L. Weiss, and K. Wegener. 2010. “Energy Consumption Measurement with a Multichannel Measurement System on a Machine Tool.” In International Conference on Innovative Technologies IN-TECH. Zürich: inspire AG, IWF, ETH Zürich.
  • Gontarz, A., S. Züst, L. Weiss, and K. Wegener. 2012. “Energetic Machine Tool Modeling Approach for Energy Consumption Prediction.” In Towards Implementing Sustainable Manufacturing. Proceedings of the 10th Global Conference on Sustainable Manufacturing, edited by G. Seliger and S. E. Kiliç, 652–658. Istanbul: Sponsored by CIRP.
  • Gutowski, T., C. Murphy, D. Allen, D. Bauer, B. Bras, T. Piwonka, P. Sheng, J. Sutherland, D. Thurston, and E. Wolff. 2005. “Environmentally Benign Manufacturing: Observations from Japan, Europe and the United States.” Journal of Cleaner Production 13 (1): 1–17. doi:10.1016/j.jclepro.2003.10.004.
  • Heidenhain. 2010. “Aspekte Der Energieeffizienz Von Werkzeugmaschinen.” Technische Information. http://www.heidenhain.de/de_DE/php/dokumentation-und-information/dokumentation/prospekte/popup/media/media/file/view/file-0217/file.pdf
  • Kara, S., G. Bogdanski, and W. Li. 2011. “Electricity metering and Monitoring in Manufacturing Systems.” In Glocalized Solutions for Sustainability in Manufacturing, edited by J. Hesselbach and C. Herrmann, 1–10. Berlin: Springer-Verlag.
  • Kordonowy, D. N. 2002. “A Power Assessment of Machining Tools.” Bachelor Thesis. Department of Mechanical Engineering, MIT, Cambride, MA.
  • Larreina, J., A. Gontarz, C. Giannoulis, V. K. Nguyen, P. Stavropoulos, and B. Sinceri 2013. “Smart Manufacturing Execution System (SMES): The Possibilities of Evaluating the Sustainability of a Production Process.” Proceedings of the 11th Global Conference on Sustainable Manufacturing, edited by G. Seliger, September 23–25, 467–472. Berlin: Innovative Solutions.
  • Li, W., A. Zein, S. Kara, and C. Herrmann. 2011. “An Investigation into Fixed Energy Consumption of Machine Tools.” In Glocalized Solutions for Sustainability in Manufacturing, edited by J. Hesselbach, et al., 268–273. Berlin: Springer-Verlag.
  • Lunze, J. 2010. Künstliche Intelligenz Für Ingenieure. München: Oldenbourg Wissenschaftsverlag GmbH.
  • Mechs, S., J. P. Müller, S. Lamparter, and J. Peschke. 2012. “Networked Priced Timed Automata for Energy-Efficient Factory Automation.” In American Control Conference (ACC), 5310–5317. Piscataway, NJ: IEEE.
  • Mechs, S. G. 2013. Model-based Engineering for Energy-efficient Operation of Factory Automation Systems within Non-productive Phases. Herzogenrath: Shaker (Berichte aus der Informatik).
  • Mori, M., and M. Fujishima. 2012. “Energy Efficiency Improvement of Machine Tools.” In Ressourceneffiziente Technologien Für Den Powertrain. International Chemnitz Manufacturing Colloquium, ICMC 2012; 2nd International Colloquium of the Cluster of Excellence Eniprod; Proceedings, Resource-Efficient Powertrain Technoloies, edited by R. Neugebauer, 581–593. Auerbach: Verl. Wiss. Scripten (Reports from the IWU, Bd. 61).
  • Mori, M., M. Fujishima, Y. Inamasu, and Y. Oda. 2011. “A Study on Energy Efficiency Improvement for Machine Tools.” CIRP Annals – Manufacturing Technology 60 (1): 145–148. doi:10.1016/j.cirp.2011.03.099.
  • Newman, S. T., A. Nassehi, R. Imani-Asrai, and V. Dhokia. 2012. “Energy Efficient Process Planning for CNC Machining.” CIRP Journal of Manufacturing Science and Technology 5 (2): 127–136. doi:10.1016/j.cirpj.2012.03.007.
  • Rahäuser, R., M. Meier, and P. Klemm. 2012. “Offene Potentiale Im Kühlschmierstoffkreislauf; Wt Werkstattechnik Online.” Jahrgang, 102 (2012): 299–305.
  • Schlechtendahl, J., P. Eberspächer, H. Haag, A. Verl, and E. Westkämper. 2013. “Framework for Controlling Energy Consumption of Machine Tools.” In EcoProduction and Logistics, EcoProduction, edited by P. Golinska, 155–168. Berlin: Springer-Verlag.
  • Schmitt, R., J. L. Bittencourt, and R. Bonefeld. 2011. “Modelling Machine Tools for Self-Optimisation of Energy Consumption.” In Glocalized Solutions for Sustainability in Manufacturing, edited by J. Hesselbach, et al., 253–257. Berlin: Springer-Verlag.
  • Shao, G., D. Kibira, and K. Lyons. 2010. A Virtual Machining Model for Sustainability Analysis. In Proceedings of ASME 2010 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Montreal, August 15–18.
  • Siemens, A. G., 2011a. “Energieeffiziente Werkzeugmaschinen mit Sinumerik Ctrl-Energy von Siemens sind sparsam und produktiv.” Nürnberg. http://www.siemens.com/press/de/pressemitteilungen/?press=/de/pressemitteilungen/2011/drive_technologies/idt2011073038.htm
  • Siemens, A. G. 2011b. “Saving Energy with SIMATIC S7. PROFIenergy with ET200S.” Application. http://cache.automation.siemens.com/dnl/TE/TE3ODAxAAAA_41986454_Tools/41986454_PROFIenergy_ET200S_DOKU_ V12_en.pdf
  • Verl, A., E. Abele, U. Heisel, A. Dietmair, P. Eberspächer, R. Rahäuser, S. Schrems, and S. Braun. 2011. “Modular Modeling of Energy Consumption for Monitoring and Control.” In Glocalized Solutions for Sustainability in Manufacturing, edited by J. Hesselbach, et al., 341–346. Berlin: Springer-Verlag.
  • Wegener, K., L. Weiss, and A. M. Gontarz. 2012. “Methods and Tools for Evaluation of Energy Efficiency in Production.” In Ressourceneffiziente Technologien Für Den Powertrain. International Chemnitz Manufacturing Colloquium, ICMC 2012, edited by R. Neugebauer, Vol. 61, 247–267. Verl: Wiss. Scripten (Reports from the IWU).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.