References
- Bowyer, A. 2007. “The Self-Replicating Rapid Prototyper-Manufacturing for the Masses.” In 8th National Conference on Rapid Design, Prototyping & Manufacturing. University of Bath. http://opus.bath.ac.uk/1684/
- Brooks, P. 2001. “Ethernet/IP-Industrial Protocol.” In Proceedings. 2001 8th IEEE International Conference on Emerging Technologies and Factory Automation, Vol. 2, 505–514. IEEE.
- ControlNet International and open DeviceNet Vendor association. 2001. “Ethernet/IP Adaptation of CIP Specification, Release 1.0.” Accessed September 10 2016. http://read.pudn.com/downloads166/ebook/763212/EIP-CIP-V2-1.0.pdf
- Drath, R., A. Luder, J. Peschke, and L. Hundt. 2008. “AutomationML-The Glue for Seamless Automation Engineering.” In 2008 IEEE International Conference on Emerging Technologies and Factory Automation, 616–623. IEEE. http://ieeexplore.ieee.org/abstract/document/4638461/
- Erickson, K. T. 1996. “Programmable Logic Controllers – The Workhorse of Factory Automation Keeps Things on Track.” IEEE Potentials 15 (1): 14–17. doi:10.1109/45.481370.
- Fieldbus Foundation. 2001. “High Speed Ethernet Specification Documents FF-801, 803, 586, 588,589, 593, 941.” Accessed September 9 2016. http://www.fieldbus.org.
- Hancu, O., V. Maties, R. Balan, and S. Stan. 2007. “Mechatronic Approach for Design and Control of a Hydraulic 3-Dof Parallel Robot.” In Annals of DAAAM & Proceedings, 321–323. http://go.galegroup.com/ps/i.do?id=GALE%7CA177174624&sid=googleScholar&v=2.1&it=r&linkaccess=fulltext&issn=17269679&p=AONE&sw=w
- Hellinger, A., and H. Seeger. 2011. Cyber-Physical Systems. Driving Force for Innovation in Mobility, Health, Energy and Production. Acatech Position Paper, National Academy of Science and Engineering: 2. Berlin: Springer
- Henssen, R., and M. Schleipen. 2014. “Interoperability between OPC UA and AutomationML.” Procedia CIRP 25: 297–304. doi:10.1016/j.procir.2014.10.042.
- Hodgson, G. 2015. “Slic3r Manual.” LulzBot. Accessed September 24 2016. http://manual.slic3r.org/intro/overview
- Holtewert, P., R. Wutzke, J. Seidelmann, and T. Bauernhansl. 2013. “Virtual Fort Knox Federative, Secure and Cloud-Based Platform for Manufacturing.” Procedia CIRP 7: 527–532. doi:10.1016/j.procir.2013.06.027.
- IEC (International Electrotechnical Commission). 2004e. “IEC 65C/358/NP. Real-time Ethernet: SERCOS III.”
- IEC (International Electrotechnical Commission). 2004f. “IEC 65C/356/NP. Real-time Ethernet: POWERLINK.”
- IEC (International Electrotechnical Commission). 2004g. “IEC 65C/355/NP. Real-time Ethernet: ETHERCAT.”
- IEC (International Electrotechnical Commission). 2004h. “IEC (2004h). IEC 65C/353/NP. Real-time Ethernet: TCnet (Time-critical Control Network).”
- International Electrotechnical Commission (IEC). 2004a. “IEC 65C/359/NP. Real-time Ethernet: PROFINET IO. Application Layer Service Definition & Application Layer Protocol Specification.”
- International Electrotechnical Commission (IEC). 2004c. “IEC 65C/361/NP. Real-time Ethernet: EtherNet/IP with Time Synchronization.”
- Jones, R., P. Haufe, E. Sells, P. Iravani, V. Olliver, C. Palmer, and A. Bowyer. 2011. “RepRap–The Replicating Rapid Prototyper.” Robotica 29 (01): 177–191. doi:10.1017/S026357471000069X.
- Kagermann, H., J. Helbig, A. Hellinger, and W. Wahlster. 2013. Recommendations for Implementing the Strategic Initiative INDUSTRIE 4.0: Securing the Future of German Manufacturing Industry; Final Report of the INDUSTRIE 4.0 Working Group. Forschungsunion. http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Material_fuer_Sonderseiten/Industrie_4.0/Final_report__Industrie_4.0_accessible.pdf
- Khaitan, S. K., and J. D. McCalley. 2015. “Design Techniques and Applications of Cyberphysical Systems: A Survey.” IEEE Systems Journal 9 (2): 350–365. doi:10.1109/JSYST.2014.2322503.
- Labs, U. I. 2017. “O3 – Operate, Orchestrate, and Originate – 14-06-05.” Accessed July 12 2017. http://www.uilabs.org/project/o3-operate-orchestrate-and-originate-14-06-05/
- Leitner, S. H., and W. Mahnke. 2006. OPC UA – Service-Oriented Architecture for Industrial Applications. ABB Corporate Research Center. http://www2.cs.uni-paderborn.de/cs/ag-engels/GI/ORA2006-Papers/leitner-final.pdf
- Li, B. H., L. Zhang, S. L. Wang, F. Tao, J. W. Cao, X. D. Jiang, X. Song, and X. D. Chai. 2010. “Cloud Manufacturing: A New Service-Oriented Networked Manufacturing Model.” Computer Integrated Manufacturing Systems 16 (1): 1–7.
- Li, R. F., Q. Liu, and W. J. Xu. 2012. “Perception and Access Adaptation of Equipment Resources in Cloud Manufacturing.” Computer Integrated Manufacturing Systems 18 (7): 1547–1553.
- Lin, Y. L., C. C. Lin, and H. S. Chiu. 2015. “The Development of Intelligent Service System for Machine Tool Industry.” In 2015 1st International Conference on Industrial Networks and Intelligent Systems (Iniscom), 100–106. IEEE. http://ieeexplore.ieee.org/abstract/document/7157829
- Liu, N., X. Li, and Q. Wang. 2011. “A Resource & Capability Virtualization Method for Cloud Manufacturing Systems.” In 2011 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 1003–1008. IEEE. http://ieeexplore.ieee.org/document/6083800/
- Liu, X. F., M. R. Shahriar, S. M. N. A. Sunny, M. C. Leu, M. Cheng, and L. Hu. 2016. “Design and Implementation of Cyber-Physical Manufacturing Cloud Using MTConnect.” In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE), V01BT02A019. ASME. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2591530
- Liu, X. F., M. R. Shahriar, S. M. N. A. Sunny, M. C. Leu, M. Cheng, and L. Hu. 2017. “Cyber-Physical Manufacturing Cloud: Architecture, Virtualization, Communication, and Testbed.” Journal of Manufacturing Systems 43 (2): 352–364. doi:10.1016/j.jmsy.2017.04.004.
- Liu, X. F., S. M. N. A. Sunny, M. R. Shahriar, M. C. Leu, M. Cheng, and L. Hu. 2016. “Implementation of MTConnect for Open Source 3D Printers in Cyber-Physical Manufacturing Cloud.” In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE), V01AT02A019. ASME. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2591461
- Luo, Y. L., L. Zhang, D. J. He, L. Ren, and F. Tao. 2011. “Study on Multi-View Model for Cloud Manufacturing.” In Advanced Materials Research. Vol. 201, 685–688. Trans Tech Publications. https://www.scientific.net/AMR.201-203.685
- Mai, J., L. Zhang, F. Tao, and L. Ren. 2016. “Customized Production Based on Distributed 3D Printing Services in Cloud Manufacturing.” The International Journal of Advanced Manufacturing Technology 84 (1–4): 71–83. doi:10.1007/s00170-015-7871-y.
- Modern Applications News. 2016. “M2M Communications can Improve Shop’s Output Up to 50% and Increase Income up to 6 Times”. Accesses September 15 2016. http://www.modernapplicationsnews.com/cms/man/opens/article-view-man.php?nid=2&bid=374&et=featurearticle&pn=02
- McFarlane, A. 1997. “Fieldbus Review.” Sensor Review 17 (3): 204–210. doi:10.1108/02602289710172319.
- Michaloski, J., B. Lee, F. Proctor, S. Venkatesh, and S. Ly. 2009. “Quantifying the Performance of MTConnect in a Distributed Manufacturing Environment.” In Proceddings of ASME DETC Conference, 533–539. ASME. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1649239
- Modbus Organization. 2006. “Modbus Application Protocol Specification”. Accessed September 18 2016. http://www.modbus.org/docs/Modbus_Application_protocol_V1_1b.pdf.
- Monostori, L. 2014. “Cyber-Physical Production Systems: Roots, Expectations and R&D Challenges.” Procedia CIRP 17: 9–13. doi:10.1016/j.procir.2014.03.115.
- Monostori, L., B. Kádár, T. Bauernhansl, S. Kondoh, S. Kumara, G. Reinhart, O. Sauer, G. Schuh, W. Sihn, and K. Ueda. 2016. “Cyber-Physical Systems in Manufacturing.” CIRP Annals-Manufacturing Technology 65 (2): 621–641. doi:10.1016/j.cirp.2016.06.005.
- MTConnect Institute. 2016. “MTConnect Overview & Architecture”. Accessed September 20 2016. http://www.mtconnect.org/resources/
- Neil, S. 2016. “MES Meets the Cloud.” Automation World, May 19. https://www.automationworld.com/article/industry-type/discrete-manufacturing/mes-meets-cloud
- Neumann, P. 2007. “Communication in Industrial Automation — What Is Going On?.” Control Engineering Practice 15 (11): 1332–1347. doi:10.1016/j.conengprac.2006.10.004.
- NSF (US National Science Foundation) 2011, “Cyber-Physical Systems (CPS).” July 6. Accessed September 22 2016. https://www.nsf.gov/pubs/2011/nsf11516/nsf11516.pdf
- Rad, C.-R., O. Hancu, I.-A. Takacs, and G. Olteanu. 2015. “Smart Monitoring of Potato Crop: A Cyber-Physical System Architecture Model in the Field of Precision Agriculture.” Agriculture and Agricultural Science Procedia 6: 73–79. doi:10.1016/j.aaspro.2015.08.041.
- Rauschecker, U., M. Meier, R. Muckenhirn, A. L. K. Yip, A. P. Jagadeesan, and J. Corney. 2011. Cloud-Based Manufacturing-As-A-Service Environment for Customized Products. International Information Management Corporation Limited: eChallenges e-2011. https://strathprints.strath.ac.uk/38573/
- Rayna, T., L. Striukova, and J. Darlington. 2015. “Co-Creation and User Innovation: The Role of Online 3D Printing Platforms.” Journal of Engineering and Technology Management 37: 90–102. doi:10.1016/j.jengtecman.2015.07.002.
- ROY-G-BIV. 2017. “ROY-G-BIV | Keep it Moving.” Accessed July 12 2017. http://www.roygbiv.com
- Sauter, T. 2010. “The Three Generations of Field-Level Networks—Evolution and Compatibility Issues.” IEEE Transactions on Industrial Electronics 57 (11): 3585–3595. doi:10.1109/TIE.2010.2062473.
- Siemens. 2017. “MindSphere.” Accessed July 12 2017. https://www.siemens.com/global/en/home/products/software/mindsphere.html
- Swales, A. 1999. “Open Modbus/TCP Specification.” Schneider Electric 29. http://www.dankohn.info/projects/Fieldpoint_module/Open_ModbusTCP_Standard.pdf
- Tao, F., L. Zhang, V. C. Venkatesh, Y. Luo, and Y. Cheng. 2011. “Cloud Manufacturing: A Computing and Service-Oriented Manufacturing Model.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225: 1969–1976. doi:10.1177/0954405411405575.
- Tao, F., Y. Cheng, L. Da Xu, L. Zhang, and B. H. Li. 2014. “CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System.” IEEE Transactions on Industrial Informatics 10 (2): 1435–1442. doi:10.1109/TII.2014.2306383.
- Tao, F., Y. Zuo, L. Da Xu, and L. Zhang. 2014. “IoT-based Intelligent Perception and Access of Manufacturing Resource toward Cloud Manufacturing.” IEEE Transactions on Industrial Informatics 10 (2): 1547–1557. doi:10.1109/TII.2014.2306397.
- ThomasNet. 2010. “OPC Foundation and MTConnect Institute Announce a Memorandum of Understanding.” Accessed September 15 2016. http://news.thomasnet.com/companystory/memorandum-of-understanding-announced-between-opc-mtconnect-584167
- Thomesse, J.-P. 2005. “Fieldbus Technology in Industrial Automation.” Proceedings of the IEEE 93 (6): 1073–1101. doi:10.1109/JPROC.2005.849724.
- Tindell, K. W., H. Hansson, and A. J. Wellings. 1994. “Analysing Real-Time Communications: Controller Area Network (CAN).” In Real-Time Systems Symposium, 1994, Proceedings, 259–263. https://pdfs.semanticscholar.org/ac88/f1ea5db2fd355e458f08227b15bec910a8ec.pdf.
- Vijayaraghavan, A., W. Sobel, A. Fox, D. Dornfeld, and P. Warndorf. 2008. “Improving Machine Tool Interoperability Using Standardized Interface Protocols: MT Connect.” Laboratory for Manufacturing and Sustainability. https://escholarship.org/uc/item/4zs976kx
- Vincent, S. J. 2001. “FOUNDATION™ Fieldbus High Speed Ethernet Control System.” Accessed September 9 2016. http://www.fieldbusinc.com/downloads/hsepaper.pdf
- Wang, L. 2013. “Machine Availability Monitoring and Machining Process Planning Towards Cloud Manufacturing.” CIRP Journal of Manufacturing Science and Technology 6 (4): 263–273. doi:10.1016/j.cirpj.2013.07.001.
- Wang, L., R. Gao, and I. Ragai. 2014. “An Integrated Cyber-Physical System for Cloud Manufacturing.” In International Manufacturing Science and Engineering Conference, Volume 1: Materials; Micro and Nano Technologies; Properties, Applications and Systems; Sustainable Manufacturing, V001T04A029. ASME. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1913987
- Wikipedia. 2014. “CC-Link Industrial Networks”. Last modified August 15. Accessed September 9 2016. http://en.wikipedia.org/wiki/CC-Link_Industrial_Networks/
- Wikipedia. 2017. “Predix (Software).” Last modified June 14. Accessed July 12 2017. http://en.wikipedia.org/wiki/Predix_(software)
- Wu, D., D. W. Rosen, L. Wang, and D. Schaefer. 2015. “Cloud-Based Design and Manufacturing: A New Paradigm in Digital Manufacturing and Design Innovation.” Computer-Aided Design 59: 1–14. doi:10.1016/j.cad.2014.07.006.
- Wu, D., J. L. Thames, D. W. Rosen, and D. Schaefer. 2012. “Towards a Cloud-Based Design and Manufacturing Paradigm: Looking Backward, Looking Forward.” In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 315–328. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1736119
- Wu, D., M. J. Greer, D. W. Rosen, and D. Schaefer. 2013. “Cloud Manufacturing: Strategic Vision and State-Of-The-Art.” Journal of Manufacturing Systems 32 (4): 564–579. doi:10.1016/j.jmsy.2013.04.008.
- Xiang, F., and Y. F. Hu. 2012. “Cloud Manufacturing Resource Access System Based on Internet of Things.” In Applied Mechanics and Materials. Vol. 121, 2421–2425. Trans Tech Publications. https://www.scientific.net/AMM.121-126.2421
- Xu, X. 2012. “From Cloud Computing to Cloud Manufacturing.” Robotics and Computer-Integrated Manufacturing 28 (1): 75–86. doi:10.1016/j.rcim.2011.07.002.
- Zuehlke, D. 2010. “SmartFactory—Towards a Factory-of-Things.” Annual Reviews in Control 34 (1): 129–138. doi:10.1016/j.arcontrol.2010.02.008.
- Zurawski, R., ed. 2014. Industrial Communication Technology Handbook. CRC Press. Spain. https://books.google.com/books?id=ppzNBQAAQBAJ&printsec=frontcover&dq=Industrial+Communication+Technology+Handbook&hl=en&sa=X&ved=0ahUKEwixq_SapdDXAhWg0YMKHTCpDTMQ6AEIKzAB#v=onepage&q=Industrial%20Communication%20Technology%20Handbook&f=false