References
- Bi, Z. M., S. Y. T. Lang, W. Shen, and L. Wang. 2008. “Reconfigurable Manufacturing Systems: The State of the Art.” International Journal of Production Research 46 (4): 967–992. doi:10.1080/00207540600905646.
- Brennan, R. W., and D. H. Norrie. 2001. “Evaluating the Performance of Reactive Control Architectures for Manufacturing Production Control.” Computers in Industry 46 (3): 235–245. doi:10.1016/S0166-3615(01)00108-7.
- Deif, A. M., and W. H. ElMaraghy. 2006. “A Control Approach to Explore the Dynamics of Capacity Scalability in Reconfigurable Manufacturing Systems.” Journal of Manufacturing Systems 25 (1): 12–24. doi:10.1016/S0278-6125(07)00003-9.
- ElMaraghy, H. A. 2006. “Flexible and Reconfigurable Manufacturing Systems Paradigms.” International Journal of Flexible Manufacturing Systems 17 (4): 261–276. doi:10.1007/s10696-006-9028-7.
- Ferber, J. 1999. Multi-Agent Systems, An Introduction to Distributed Artificial Intelligence. Reading, MA: Addison Wesley.
- Guo, T., J. Li, X. Dai, and Q. Sun. 2012 “Supervisory Control Reconfiguration and Optimization of Resource Allocation Systems with a Petri Net and Mathematical Programming Approach.” The 9th IEEE International Conference on Networking Sensing and Control, 52–57.
- Hsieh, F. S. 2010. “Design of Reconfiguration Mechanism for Holonic Manufacturing Systems Based on Formal Models.” Engineering Applications of Artificial Intelligence 23 (7): 1187–1199.
- Hsieh, F. S., and C. Y. Chiang. 2011. “Collaborative Composition of Processes in Holonic Manufacturing System.” Computers in Industry 62 (1): 51–64.
- Hsieh, F. S., and J. B. Lin. 2014. “A Dynamic Scheme for Scheduling Complex Tasks in Manufacturing Systems Based on Collaboration of Agent.” Applied Intelligence 41 (2): 366–382. doi:10.1007/s10489-014-0521-5.
- Hsieh, F. S., and J. B. Lin. 2016. “A Self-Adaptation Scheme for Workflow Management in Multi-Agent Systems.” Journal of Intelligent Manufacturing 27 (1): 131–148.
- Kahloul, L., S. Bourekkache, and K. Djouani. 2016. “Designing Reconfigurable Manufacturing Systems Using Reconfigurable Object Petri Nets.” International Journal of Computer Integrated Manufacturing 29 (8): 889–906. doi:10.1080/0951192X.2015.1130262.
- Koren, Y. 2006. “General RMS Characteristics. Comparison with Dedicated and Flexible Systems.” Reconfigurable Manufacturing Systems and Transformable Factories 27–45. doi:10.1007/3-540-29397-3_3.
- Koren, Y., U. Heisel, F. Jovane, T. Moriwaki, G. Pritschow, A. G. Ulsoy, and H. Van Brussel. 1999. “Reconfigurable Manufacturing Systems.” CIRP Annals 48 (2): 6–12.
- Koren, Y., S. J. Hu, and T. W. Weber. 1998. “Impact of Manufacturing System Configuration on Performance.” CIRP Annals Manufacturing Technology 47 (1): 369–372. doi:10.1016/S0007-8506(07)62853-4.
- Li, J., X. Dai, and Z. Meng. 2009. “Automatic Reconfiguration of Petri Net Controllers for Reconfigurable Manufacturing Systems with an Improved Net Rewriting System-Based Approach.” IEEE Transactions on Automation Science and Engineering 6 (1): 156–167.
- Molina, A., C. A. Rodriguez, H. Ahuett, J. A. Cortés, M. Ramírez, G. Jiménez, and S. Martinez. 2005. “Next-Generation Manufacturing Systems: Key Research Issues in Developing and Integrating Reconfigurable and Intelligent Machines.” International Journal of Computer Integrated Manufacturing 18 (7): 525–536. doi:10.1080/09511920500069622.
- Momoh, J. A., Y. Xia, and K. C. Alfred. 2008. “Dynamic Reconfiguration for Shipboard Power System Using Multi-Agent System,” 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, Pittsburgh, 1–4. doi: 10.1109/PES.2008.4596903.
- Murata, T. 1989. “Petri Nets: Properties, Analysis and Applications.” Proceedings of the IEEE 77 (4): 541–580.
- Nareshkumar, K., M. A. Choudhry, J. Lai, and A. Feliachi. 2009. “Application of Multi-Agents for Fault Detection and Reconfiguration of Power Distribution Systems,” 2009 IEEE Power & Energy Society General Meeting, 1–8. doi: 10.1109/PES.2009.5276005.
- Neligwa, T., and M. Fletcher. 2003. An HMS Operational Model, in Agent-Based Manufacturing: Advances in the Holonic Approach. edited by S. M. Deen. Berlin: Springer-Verlag, 163–191.
- Nilsson, N. J. 1998. Artificial Intelligence: A New Synthesis. San Francisco, CA: Morgan Kaufmann Publishers .
- Parunak, H. V. D. 1987. “Manufacturing Experiences with the Contract Net.” In Distributed Artificial Intelligence, edited by M. Huhns, 285–310. Pitman: London.
- Polyak, B. T. 1969. ““Minimization of Unsmooth Functionals.” USSR Computational Mathematics and Mathetical Physics 9: 14–29.
- Putnik, G., A. Sluga, H. ElMaraghy, R. Teti, Y. Koren, T. Tolio, and B. Hon. 2013. “Scalability in Manufacturing Systems Design and Operation: State-Of-The-Art and Future Developments Roadmap.” CIRP Annals - Manufacturing Technology 62 (2): 751–774. doi:10.1016/j.cirp.2013.05.002.
- Ramos, C. 1996. “A Holonic Approach for Task Scheduling in Manufacturing Systems.” Proceedings of the 1996 IEEE International Conference on Robotics and Automation, 2511–2516.
- Smith, R. G. 1980. “The Contract Net Protocol: High-Level Communication and Control in a Distributed Problem Solver.” IEEE Transactions on Computers 29 (12): 1104–1113.
- Son, S. Y., T. L. Olsen, and D. Yip-Hoi. 2001. “An Approach to Scalability and Line Balancing for Reconfigurable Manufacturing Systems.” Integrated Manufacturing Systems 12 (7): 500–511.
- Spicer, P., Y. Koren, and M. Shpitalni. 2002. “Design Principles for Machining System Configurations.” CIRP Annals 51 (1): 275–280. doi:10.1016/S0007-8506(07)61516-9.
- Spicer, P., D. Yip-Hoi, and Y. Koren. 2005. “Scalable Reconfigurable Equipment Design Principles.” International Journal of Production Research 43 (22): 4839–4852. doi:10.1080/00268970500183042.