References
- Auschitzky, E., M. Hammer, and A. Rajagopaul. 2014. How Big Data Can Improve Manufacturing. McKinsey & Company . July, 1–4.
- Cai, W., F. Liu, H. Zhang, P. J. Liu, and J. B. Tuo. 2017. “Development of Dynamic Energy Benchmark for Mass Production in Machining Systems for Energy Management and Energy-Efficiency Improvement.” Applied Energy 202: 715–725. doi:https://doi.org/10.1016/j.apenergy.2017.05.180.
- Cassettari, L., I. Bendato, M. Mosca, and R. Mosca. 2017. “Energy Resources Intelligent Management Using on Line Real-Time Simulation: A Decision Support Tool for Sustainable Manufacturing.” Applied Energy 190: 841–851. doi:https://doi.org/10.1016/j.apenergy.2017.01.009.
- Chen, X. Z., C. B. Li, Y. Tang, and Q. G. Xiao. 2018. “An Internet of Things Based Energy Efficiency Monitoring and Management System for Machining Workshop.” Journal of Cleaner Production 199: 957–968. doi:https://doi.org/10.1016/j.jclepro.2018.07.211.
- Fernandez, M., L. Li, and Z. Y. Sun. 2013. “‘Just-for-peak’ Buffer Inventory for Peak Electricity Demand Reduction of Manufacturing Systems.” International Journal of Production Economics 146 (1): 178–184. doi:https://doi.org/10.1016/j.ijpe.2013.06.020.
- Foshan Pinzhi Information Technology Company. 2018. “Foshan Faenza Sanitary Ware Limited Company.” http://www.pztech.com.cn/front/successcasedetail?id=3 (accessed 23 December 2019, in Chinese).
- Gabaldón-Estevan, D., A. Mezquita, S. Ferrer, and E. Monfort. 2016. “Unwanted Effects of European Union Environmental Policy to Promote a Post-Carbon Industry. The Case of Energy in the European Ceramic Tile Sector.” Journal of Cleaner Production 117: 41–49. doi:https://doi.org/10.1016/j.jclepro.2016.01.021.
- Ge, Y. T., L. Li, and Y. Wang. 2017. “Modeling of Bernoulli Production Line with the Rework Loop for Transient and Steady-State Analysis.” Journal of Manufacturing Systems 44: 22–41. doi:https://doi.org/10.1016/j.jmsy.2017.04.002.
- Guo, Z. G., Y. F. Zhang, X. B. Zhao, and X. Y. Song. 2020. “CPS-Based Self-Adaptive Collaborative Control for Smart Production-Logistics Systems.” IEEE Transactions on Cybernetics 1–11. doi:https://doi.org/10.1109/TCYB.2020.2964301.
- Herman, J., H. Herman, M. J. Mathews, and J. C. Vosloo. 2018. “Using Big Data for Insights into Sustainable Energy Consumption in Industrial and Mining Sectors.” Journal of Cleaner Production 197: 1352–1364. doi:https://doi.org/10.1016/j.jclepro.2018.06.290.
- International Energy Agency. 2019. “Key World Energy Statistics 2019.” https://webstore.iea.org/key-world-energy-statistics-2019 (accessed 16 October 2019)
- Li, H. C., H. D. Yang, B. X. Yang, C. J. Zhu, and S. H. Yin. 2018. “Modelling and Simulation of Energy Consumption of Ceramic Production Chains with Mixed Flows Using Hybrid Petri Nets.” International Journal of Production Research 56 (8): 3007–3024. doi:https://doi.org/10.1080/00207543.2017.1391415.
- Liang, Y. C., X. Lu, W. D. Li, and S. Wang. 2018. “Cyber Physical System and Big Data Enabled Energy Efficient Machining Optimisation.” Journal of Cleaner Production 187: 46–62. doi:https://doi.org/10.1016/j.jclepro.2018.03.149.
- Liu, B. F., Y. F. Zhang, G. Zhang, and P. Zheng. 2019. “Edge-Cloud Orchestration Driven Industrial Smart Product-Service Systems Solution Design Based on CPS and IIoT.” Advanced Engineering Informatics 42: 100984. doi:https://doi.org/10.1016/j.aei.2019.100984.
- Liu, L. R., L. Aye, Z. W. Lu, and P. H. Zhang. 2006. “Analysis of the Overall Energy Intensity of Alumina Refinery Process Using Unit Process Energy Intensity and Product Ratio Method.” Energy 31 (8): 1167–1176. doi:https://doi.org/10.1016/j.energy.2005.04.013.
- Liu, Y. 2013. “Sustainable Competitive Advantage in Turbulent Business Environments.” International Journal of Production Research 51 (10): 2821–2841. doi:https://doi.org/10.1080/00207543.2012.720392.
- Liu, Y., and L. T. Liang. 2015. “Evaluating and Developing Resource-Based Operations Strategy for Competitive Advantage: An Exploratory Study of Finnish High-Tech Manufacturing Industries.” International Journal of Production Research 53 (4): 1019–1037. doi:https://doi.org/10.1080/00207543.2014.932936.
- Liu, Y., Y. F. Zhang, S. Ren, M. Y. Yang, Y. T. Wang, and D. Huisingh. 2020. “How Can Smart Technologies Contribute to Sustainable Product Lifecycle Management?” Journal of Cleaner Production 249: 119423. doi:https://doi.org/10.1016/j.jclepro.2019.119423.
- Lu, Y. Q., T. Peng, and X. Xu. 2019. “Energy-Efficient Cyber-Physical Production Network: Architecture and Technologies.” Computers & Industrial Engineering 129: 56–66. doi:https://doi.org/10.1016/j.cie.2019.01.025.
- Lv, J. X., F. Gu, W. J. Zhang, and J. F. Guo. 2019. “Life Cycle Assessment and Life Cycle Costing of Sanitary Ware Manufacturing: A Case Study in China.” Journal of Cleaner Production 238: 117938. doi:https://doi.org/10.1016/j.jclepro.2019.117938.
- Lv, J. X., T. Peng, Y. F. Zhang, and Y. C. Wang. 2020a “A Novel Method to Forecast Energy Consumption of Selective Laser Melting Processes.” International Journal of Production Research 1–17. doi: https://doi.org/10.1080/00207543.2020.1733126.
- Lv, J. X., Z. G. Wang, and S. Y. Ma. 2020. “Calculation Method and Its Application for Energy Consumption of Ball Mills in Ceramic Industry Based on Power Feature Deployment.” Advances in Applied Ceramics 1–12. doi:https://doi.org/10.1080/17436753.2020.1732621.
- Ma, S. Y., Y. F. Zhang, J. X. Lv, H. D. Yang, and J. Z. Wu. 2019. “Energy-Cyber-Physical System Enabled Management for Energy-Intensive Manufacturing Industries.” Journal of Cleaner Production 226: 892–903. doi:https://doi.org/10.1016/j.jclepro.2019.04.134.
- Macana, C. A., N. Quijano, and E. Mojicanava. 2011. “A Survey on Cyber Physical Energy Systems and Their Applications on Smart Grids.” IEEE PES Innovative Smart Grid Technologies Conference, 1–7. https://doi.org/10.1109/ISGT-LA.2011.6083194.
- Majeed, A., J. X. Lv, and T. Peng. 2018. “A Framework for Big Data Driven Process Analysis and Optimization for Additive Manufacturing.” Rapid Prototyping Journal 25 (2): 308–321. doi:https://doi.org/10.1108/RPJ-04-2017-0075.
- May, G., B. Stahl, M. Taisch, and D. Kiritsis. 2017. “Energy Management in Manufacturing: From Literature Review to a Conceptual Framework.” Journal of Cleaner Production 167: 1464–1489. doi:https://doi.org/10.1016/j.jclepro.2016.10.191.
- Monostori, L. 2014. “Cyber-Physical Production Systems: Roots, Expectations and R&D Challenges.” Procedia CIRP 17: 9–13. doi:https://doi.org/10.1016/j.procir.2014.03.115.
- National Standards of People’s Republic of China. 2008. “GB/T 2589-2008 General Principles for Calculation of the Comprehensive Energy Consumption.” http://www.zbgb.org/2/StandardDetail513280.htm (accessed 10 October 2018, in Chinese).
- Ouyang, J. J., and H. C. Shen. 2017. “The Choice of Energy Saving Modes for an Energy-Intensive Manufacturer considering Non-Energy Benefits.” Journal of Cleaner Production 141: 83–98. doi:https://doi.org/10.1016/j.jclepro.2016.08.142.
- Qian, C., Y. F. Zhang, C. Jiang, S. L. Pan, and Y. M. Rong. 2020. “A Real-Time Data-Driven Collaborative Mechanism in Fixed-Position Assembly Systems for Smart Manufacturing.” Robotics and Computer-integrated Manufacturing 61: 101841. doi:https://doi.org/10.1016/j.rcim.2019.101841.
- Qian, C., Y. F. Zhang, Y. Liu, and Z. Wang. 2019. “A Cloud Service Platform Integrating Additive and Subtractive Manufacturing with High Resource Efficiency.” Journal of Cleaner Production 241: 118379. doi:https://doi.org/10.1016/j.jclepro.2019.118379. September.
- Ren, S., Y. F. Zhang, Y. Liu, T. Sakao, D. Huisingh, and C. M. V. B. Almeida. 2019. “A Comprehensive Review of Big Data Analytics Throughout Product Lifecycle to Support Sustainable Smart Manufacturing: A Framework, Challenges and Future Research Directions.” Journal of Cleaner Production 210: 1343–1365. doi:https://doi.org/10.1016/j.jclepro.2018.11.025.
- Rudberg, M., M. Waldemarsson, and H. Lidestam. 2013. “Strategic Perspectives on Energy Management: A Case Study in the Process Industry.” Applied Energy 104: 487–496. doi:https://doi.org/10.1016/j.apenergy.2012.11.027.
- Schulze, C., S. Thiede, B. Thiede, D. Kurle, S. Blume, and C. Herrmann. 2019. “Cooling Tower Management in Manufacturing Companies: A Cyber-Physical System Approach.” Journal of Cleaner Production 211: 428–441. doi:https://doi.org/10.1016/j.jclepro.2018.11.184.
- Shrouf, F., and G. Miragliotta. 2015. “Energy Management Based on Internet of Things: Practices and Framework for Adoption in Production Management.” Journal of Cleaner Production 100: 235–246. doi:https://doi.org/10.1016/j.jclepro.2015.03.055.
- Shrouf, F., J. Ordieres, and G. Miragliotta. 2014. “Smart Factories in Industry 4.0: A Review of the Concept and of Energy Management Approached in Production Based on the Internet of Things Paradigm.” In 2014 IEEE International Conference on Industrial Engineering and Engineering Management, 697–701. doi:https://doi.org/10.1109/IEEM.2014.7058728.
- Sun, W. Q., Q. Wang, Y. Zhou, and J. Z. Wu. 2020b. “Material and Energy Flows of the Iron and Steel Industry: Status Quo, Challenges and Perspectives.” Applied Energy 268: 114946. doi:https://doi.org/10.1016/j.apenergy.2020.114946.
- Sun, W. Q., Q. Wang, Z. Zheng, and J. J. Cai. 2020a. “Material–energy–emission Nexus in the Integrated Iron and Steel Industry.” Energy Conversion and Management 213: 112828. doi:https://doi.org/10.1016/j.enconman.2020.112828.
- Sun, W. Q., X. D. Xu, Z. Q. Lv, H. J. Mao, and J. Z. Wu. 2019a. “Environmental Impact Assessment of Wastewater Discharge with Multi-Pollutants from Iron and Steel Industry.” Journal of Environmental Management 245: 210–215. doi:https://doi.org/10.1016/j.jenvman.2019.05.081.
- Sun, W. Q., X. Y. Yue, Y. H. Wang, and J. J. Cai. 2018b. “Energy and Exergy Recovery from Exhaust Hot Water Using Organic Rankine Cycle and a Retrofitted Configuration.” Journal of Central South University 25 (6): 1464–1474. doi:https://doi.org/10.1007/s11771-018-3840-6.
- Sun, W. Q., Y. Zhou, J. X. Lv, and J. Z. Wu. 2019b. “Assessment of Multi-Air Emissions: Case of Particulate Matter (Dust), SO2, NO and CO2 from Iron and Steel Industry of China.” Journal of Cleaner Production 232: 350–358. doi:https://doi.org/10.1016/j.jclepro.2019.05.400.
- Sun, W. Q., Y. H. Wang, F. Y. Zhang, and Y. Q. Zhao. 2018a. “Dynamic Allocation of Surplus By-Product Gas in a Steel Plant by Dynamic Programming with a Reduced State Space Algorithm.” Engineering Optimization 50 (9): 1578–1592. doi:https://doi.org/10.1080/0305215X.2017.1402013.
- Sun, W. Q., Z. H. Wang, and Q. Wang. 2020c. “Hybrid Event-, Mechanism- and Data-driven Prediction of Blast Furnace Gas Generation.” Energy 199: 117497. doi: https://doi.org/10.1016/j.energy.2020.117497.
- Sun, Z. Y., L. Li, and F. Dababneh. 2016. “Plant-Level Electricity Demand Response for Combined Manufacturing System and Heating, Venting, and Air-Conditioning (HVAC) System.” Journal of Cleaner Production 135: 1650–1657. doi:https://doi.org/10.1016/j.jclepro.2015.12.098.
- Tao, F., Y. Zuo, L. D. Xu, L. Lv, and L. Zhang. 2014. “Internet of Things and BOM-Based Life Cycle Assessment of Energy-Saving and Emission-Reduction of Products.” IEEE Transactions on Industrial Informatics 10 (2): 1252–1261. doi:https://doi.org/10.1109/TII.2014.2306771.
- United Nations Framework Convention on Climate Change. 2015. “Paris Agreement.” http://unfccc.int/files/home/application/pdf/paris_agreement.pdf (accessed 30 August 2017)
- Wang, S., Y. C. Liang, W. D. Li, and X. T. Cai. 2018. “Big Data Enabled Intelligent Immune System for Energy Efficient Manufacturing Management.” Journal of Cleaner Production 195: 507–520. doi:https://doi.org/10.1016/j.jclepro.2018.05.203.
- Wang, W. B., H. D. Yang, Y. F. Zhang, and J. X. Xu. 2017. “IoT-Enabled Real-Time Energy Efficiency Optimisation Method for Energy-Intensive Manufacturing Enterprises.” International Journal of Computer Integrated Manufacturing 31 (4–5): 362–379. doi:https://doi.org/10.1080/0951192X.2017.1337929.
- Wang, W. B., Y. F. Zhang, and R. Y. Zhong. 2020. “A Proactive Material Handling Method for CPS Enabled Shop-Floor.” Robotics and Computer-integrated Manufacturing 61: 101849. doi:https://doi.org/10.1016/j.rcim.2019.101849.
- Wang, Y., and L. Li. 2013. “Time-of-Use Based Electricity Demand Response for Sustainable Manufacturing Systems.” Energy 63: 233–244. doi:https://doi.org/10.1016/j.energy.2013.10.011.
- Wei, M., S. H. Hong, and M. Alam. 2016. “An IoT-Based Energy-Management Platform for Industrial Facilities.” Applied Energy 164: 607–619. doi:https://doi.org/10.1016/j.apenergy.2015.11.107.
- Xiao, Q. G., C. B. Li, Y. Tang, L. L. Li, and L. Li. 2019. “A Knowledge-Driven Method of Adaptively Optimizing Process Parameters for Energy Efficient Turning.” Energy 166: 142–156. doi:https://doi.org/10.1016/j.energy.2018.09.191.
- Yan, F. Y., J. Q. Wang, Y. Li, and P. H. Cui. 2020. “An Improved Aggregation Method for Performance Analysis of Bernoulli Serial Production Lines.” IEEE Transactions on Automation Science and Engineering 1–8. doi:https://doi.org/10.1109/TASE.2020.2964609.
- Yang, Y. R., M. He, and L. Li. 2020. “Power Consumption Estimation for Mask Image Projection Stereolithography Additive Manufacturing Using Machine Learning Based Approach.” Journal of Cleaner Production 251: 119710. doi:https://doi.org/10.1016/j.jclepro.2019.119710.
- Zhang, Y. F., G. Zhang, J. Q. Wang, S. D. Sun, S. B. Si, and T. Yang. 2015. “Real-Time Information Capturing and Integration Framework of the Internet of Manufacturing Things.” International Journal of Computer Integrated Manufacturing 28 (8): 811–822. doi:https://doi.org/10.1080/0951192X.2014.900874.
- Zhang, Y. F., S. Ren, Y. Liu, T. Sakao, and D. Huisingh. 2017. “A Framework for Big Data Driven Product Lifecycle Management.” Journal of Cleaner Production 159: 229–240. doi:https://doi.org/10.1016/j.jclepro.2017.04.172.
- Zhang, Y. F., S. Y. Ma, H. D. Yang, J. X. Lv, and Y. Liu. 2018. “A Big Data Driven Analytical Framework for Energy-intensive Manufacturing Industries.” Journal of Cleaner Production 197: 57–72. doi:https://doi.org/10.1016/j.jclepro.2018.06.170.
- Zhang, Y. F., Z. F. Zhu, and J. X. Lv. 2018. “CPS-Based Smart Control Model for Shopfloor Material Handling.” IEEE Transactions on Industrial Informatics 14 (4): 1755–1764. doi:https://doi.org/10.1109/TII.2017.2759319.
- Zheng, Y. J., S. Liu, W. Huang, and J. J. Jiang. 2019. “Inter-organizational Cooperation in Automotive New Product Development Projects.” Industrial Management & Data Systems 120 (1): 79–97. doi:https://doi.org/10.1108/IMDS-04-2019-0217.
- Zhou, K. L., C. Fu, and S. L. Yang. 2016. “Big Data Driven Smart Energy Management: From Big Data to Big Insights.” Renewable and Sustainable Energy Reviews 56: 215–225. doi:https://doi.org/10.1016/j.rser.2015.11.050.