References
- Aivaliotis, P., K. Georgoulias, and G. Chryssolouris. 2019. “The Use of Digital Twin for Predictive Maintenance in Manufacturing.” International Journal of Computer Integrated Manufacturing 32 (11): 1067–1080. doi:https://doi.org/10.1080/0951192X.2019.1686173.
- Ajzen, I. 1991. “The Theory of Planned Behavior.” Theories of Cognitive Self-Regulation 50 (2): 179–211. doi:https://doi.org/10.1016/0749-5978(91)90020-T.
- Al-Emran, M., V. Mezhuyev, and A. Kamaludin. 2018. “Technology Acceptance Model in M-Learning Context: A Systematic Review.” Computers & Education 125 (October): 389–412. doi:https://doi.org/10.1016/j.compedu.2018.06.008.
- Asian Disaster Preparedness Centre. 2015. “Chemical Accidents Prevention and Preparedness (CAPP) in Asia.” Asian Disaster Preparedness Centre. https://www.wcdrr.org/wcdrr-data/uploads/424/Brochure%20-%20Chemical%20Accidents%20Prevention%20and%20Preparedness%20(CAPP)%20in%20Asia.pdf
- Bagozzi, R. P., F. D. Davis, and P. R. Warshaw. 1992. “Development and Test of a Theory of Technological Learning and Usage.” Human Relations 45 (7): 659–686. doi:https://doi.org/10.1177/001872679204500702.
- Bandura, A. 1997. Self-Efficacy: The Exercise of Control. New York, NY: W H Freeman/Times Books/Henry Holt.
- Bowman, D. A., and R. P. McMahan. 2007. “Virtual Reality: How Much Immersion Is Enough?” Computer 40 (7): 36–43. doi:https://doi.org/10.1109/MC.2007.257.
- Bunker, W. M. 1978. “Training Effectiveness Versus Simulation Realism.” Eleventh NTEX/Industry Conference Proceedings. Orlando, FL: Naval Training Equipment Center. doi:https://doi.org/10.1117/12.956891.
- Chen, X., Z. Chen, Y. Li, T. He, J. Hou, S. Liu, and Y. He. 2019. “ImmerTai: Immersive Motion Learning in VR Environments.” Journal of Visual Communication and Image Representation 58 (January): 416–427. doi:https://doi.org/10.1016/j.jvcir.2018.11.039.
- Cheon, J., S. Lee, S. M. Crooks, and J. Song. 2012. “An Investigation of Mobile Learning Readiness in Higher Education Based on the Theory of Planned Behavior.” Computers & Education 59 (3): 1054–1064. doi:https://doi.org/10.1016/j.compedu.2012.04.015.
- Chhetri, M. B., S. Krishnaswamy, and S. W. Loke. 2004. “Smart Virtual Counterparts for Learning Communities.” In Web Information Systems – WISE 2004 Workshops, edited by C. Bussler, S.-K. Hong, W. Jun, R. Kaschek, S. K. Kinshuk, S. W. Loke, et al., 125–134. Lecture Notes in Computer Science. Berlin, Heidelberg: Springer. doi:https://doi.org/10.1007/978-3-540-30481-4_12.
- Chryssolouris, G., D. Mavrikios, D. Fragos, V. Karabatsou, and K. Pistiolis. 2002. “A Novel Virtual Experimentation Approach to Planning and Training for Manufacturing Processes–the Virtual Machine Shop.” International Journal of Computer Integrated Manufacturing 15 (3): 214–221. doi:https://doi.org/10.1080/09511920110034978.
- Crichton, M., and R. Flin. 2001. “Training for Emergency Management: Tactical Decision Games.” Journal of Hazardous Materials, International Perspectives on Managing Social Dimensions of Hazardous Materials Disasters 88 (2): 255–266. doi:https://doi.org/10.1016/S0304-3894(01)00270-9.
- Davis, F. D. 1989. “Perceived Usefulness, Perceived Ease of Use, and User Acceptance of Information Technology.” MIS Quarterly 13 (3): 319–340. doi:https://doi.org/10.2307/249008.
- Davis, F. D., R. P. Bagozzi, and P. R. Warshaw. 1989. “User Acceptance of Computer Technology: A Comparison of Two Theoretical Models.” Management Science 35 (8): 982–1003. doi:https://doi.org/10.1287/mnsc.35.8.982.
- El Saddik, A. 2018. “Digital Twins: The Convergence of Multimedia Technologies.” IEEE MultiMedia 25 (2): 87–92. doi:https://doi.org/10.1109/MMUL.2018.023121167.
- Hair, J. F., Jr, G. Tomas, M. Hult, C. Ringle, and M. Sarstedt. 2016. A Primer on Partial Least Squares Structural Equation Modeling (PLS-SEM). Thousand Oaks, CA: Sage publications.
- Han, Y.-S., J. Lee, J. Lee, W. Lee, and K. Lee. 2019. “3D CAD Data Extraction and Conversion for Application of Augmented/Virtual Reality to the Construction of Ships and Offshore Structures.” International Journal of Computer Integrated Manufacturing 32 (7): 658–668. doi:https://doi.org/10.1080/0951192X.2019.1599440.
- Havard, V., B. Jeanne, M. Lacomblez, and D. Baudry. 2019. “Digital Twin and Virtual Reality: A Co-Simulation Environment for Design and Assessment of Industrial Workstations.” Production & Manufacturing Research 7 (1): 472–489. doi:https://doi.org/10.1080/21693277.2019.1660283.
- Hendrickson, A. R., P. D. Massey, and T. P. Cronan. 1993. “On the Test-Retest Reliability of Perceived Usefulness and Perceived Ease of Use Scales.” MIS Quarterly 17 (2): 227–230. doi:https://doi.org/10.2307/249803.
- King, D., S. Tee, L. Falconer, C. Angell, D. Holley, and A. Mills. 2018. “Virtual Health Education: Scaling Practice to Transform Student Learning: Using Virtual Reality Learning Environments in Healthcare Education to Bridge the Theory/Practice Gap and Improve Patient Safety.” Nurse Education Today 71 (December): 7–9. doi:https://doi.org/10.1016/j.nedt.2018.08.002.
- King, W. R., and J. He. 2006. “A Meta-Analysis of the Technology Acceptance Model.” Information & Management 43 (6): 740–755. doi:https://doi.org/10.1016/j.im.2006.05.003.
- Kortov, V., and Y. Ustyantsev. 2013. “Chernobyl Accident: Causes, Consequences and Problems of Radiation Measurements.” Radiation Measurements, 7th International Workshop on Ionizing Radiation Monitoring 55 (August): 12–16. doi:https://doi.org/10.1016/j.radmeas.2012.05.015.
- Kousi, N., C. Gkournelos, S. Aivaliotis, C. Giannoulis, G. Michalos, and S. Makris. 2019. “Digital Twin for Adaptation of Robots’ Behavior in Flexible Robotic Assembly Lines.” Procedia Manufacturing 28: 121–126. doi:https://doi.org/10.1016/j.promfg.2018.12.020.
- Kwok, P. K., M. Yan, B. K. P. Chan, and H. Y. K. Lau. 2019. “Crisis Management Training Using Discrete-Event Simulation and Virtual Reality Techniques.” Computers & Industrial Engineering 135 (September): 711–722. doi:https://doi.org/10.1016/j.cie.2019.06.035.
- Legris, P., J. Ingham, and P. Collerette. 2003. “Why Do People Use Information Technology? A Critical Review of the Technology Acceptance Model.” Information & Management 40 (3): 191–204. doi:https://doi.org/10.1016/S0378-7206(01)00143-4.
- Lin, T. 2017. “Virtual Reality of Earthquake Ground Motions for Emergency Response.” COMPDYN 2017: Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, National Technical University of Athens, Rhodes Island, Greece.
- Liu, Z., and K. Ota. 2017. Smart Technologies for Emergency Response and Disaster Management. Hershey, United States: IGI Global.
- Lu, Y., Q. Min, Z. Liu, and Y. Wang. 2019. “An IoT-Enabled Simulation Approach for Process Planning and Analysis: A Case from Engine Re-Manufacturing Industry.” International Journal of Computer Integrated Manufacturing 1–17. doi:https://doi.org/10.1080/0951192X.2019.1571237.
- Malik, A. A., T. Masood, and A. Bilberg. 2020. “Virtual Reality in Manufacturing: Immersive and Collaborative Artificial-Reality in Design of Human-Robot Workspace.” International Journal of Computer Integrated Manufacturing 33 (1): 22–37. doi:https://doi.org/10.1080/0951192X.2019.1690685.
- Marangunić, N., and A. Granić. 2015. “Technology Acceptance Model: A Literature Review from 1986 to 2013.” Universal Access in the Information Society 14 (1): 81–95. doi:https://doi.org/10.1007/s10209-014-0348-1.
- McEachan, R., R. Charlotte, M. Conner, N. J. Taylor, and R. J. Lawton. 2011. “Prospective Prediction of Health-Related Behaviours with the Theory of Planned Behaviour: A Meta-Analysis.” Health Psychology Review 5 (2): 97–144. doi:https://doi.org/10.1080/17437199.2010.521684.
- Nikolakis, N., K. Alexopoulos, E. Xanthakis, and G. Chryssolouris. 2019. “The Digital Twin Implementation for Linking the Virtual Representation of Human-Based Production Tasks to Their Physical Counterpart in the Factory-Floor.” International Journal of Computer Integrated Manufacturing 32 (1): 1–12. doi:https://doi.org/10.1080/0951192X.2018.1529430.
- Park, K. T., Y. W. Nam, H. S. Lee, S. J. Im, S. D. Noh, J. Y. Son, and H. Kim. 2019. “Design and Implementation of a Digital Twin Application for a Connected Micro Smart Factory.” International Journal of Computer Integrated Manufacturing 32 (6): 596–614. doi:https://doi.org/10.1080/0951192X.2019.1599439.
- Rau, P.-L. P., J. Zheng, Z. Guo, and J. Li. 2018. “Speed Reading on Virtual Reality and Augmented Reality.” Computers & Education 125 (October): 240–245. doi:https://doi.org/10.1016/j.compedu.2018.06.016.
- “REALITY | Meaning in the Cambridge English Dictionary.” 2019. Accessed March 29. https://dictionary.cambridge.org/dictionary/english/reality
- Robert, B., and C. Lajtha. 2002. “A New Approach to Crisis Management.” Journal of Contingencies and Crisis Management 10 (4): 181–191. doi:https://doi.org/10.1111/1468-5973.00195.
- Rubio, E. M., A. Sanz, and M. A. Sebastián. 2005. “Virtual Reality Applications for the Next-Generation Manufacturing.” International Journal of Computer Integrated Manufacturing 18 (7): 601–609. doi:https://doi.org/10.1080/09511920500069259.
- Sebillo, M., G. Vitiello, L. Paolino, and A. Ginige. 2016. “Training Emergency Responders through Augmented Reality Mobile Interfaces.” Multimedia Tools and Applications 75 (16): 9609–9622. doi:https://doi.org/10.1007/s11042-015-2955-0.
- Shang, H., Z. Zhao, and R. Thorn. 2003. “Implementing Manufacturing Message Specifications (MMS) within Collaborative Virtual Environments over the Internet.” International Journal of Computer Integrated Manufacturing 16 (2): 112–127. doi:https://doi.org/10.1080/713804988.
- Szajna, B. 1994. “Software Evaluation and Choice: Predictive Validation of the Technology Acceptance Instrument.” MIS Quarterly 18 (3): 319–324. doi:https://doi.org/10.2307/249621.
- Tsai, M.-K., Y.-C. Lee, C.-H. Lu, M.-H. Chen, T.-Y. Chou, and N.-J. Yau. 2012. “Integrating Geographical Information and Augmented Reality Techniques for Mobile Escape Guidelines on Nuclear Accident Sites.” Journal of Environmental Radioactivity 109 (July): 36–44. doi:https://doi.org/10.1016/j.jenvrad.2011.12.025.
- Turner, C. J., W. Hutabarat, J. Oyekan, and A. Tiwari. 2016. “Discrete Event Simulation and Virtual Reality Use in Industry: New Opportunities and Future Trends.” IEEE Transactions on Human-Machine Systems 46 (6): 882–894. doi:https://doi.org/10.1109/THMS.2016.2596099.
- Venkatesh, V., and F. D. Davis. 2000. “A Theoretical Extension of the Technology Acceptance Model: Four Longitudinal Field Studies.” Management Science 46 (2): 186–204. doi:https://doi.org/10.1287/mnsc.46.2.186.11926.
- Venkatesh, V., and H. Bala. 2008. “Technology Acceptance Model 3 and a Research Agenda on Interventions.” Decision Sciences 39 (2): 273–315. doi:https://doi.org/10.1111/j.1540-5915.2008.00192.x.
- “VIRTUAL | Meaning in the Cambridge English Dictionary.” 2019. Accessed March 29. https://dictionary.cambridge.org/dictionary/english/virtual
- Vince, J. 1998. Essential Virtual Reality Fast: How to Understand the Techniques and Potential of Virtual Reality. London, United Kingdom: Springer.
- Xiao, H., Y. Duan, and Z. Zhang. 2018. “Mobile 3D Assembly Process Information Construction and Transfer to the Assembly Station of Complex Products.” International Journal of Computer Integrated Manufacturing 31 (1): 11–26. doi:https://doi.org/10.1080/0951192X.2017.1356470.
- Yan, M., and C. Or. 2018. “Factors in the 4-Week Acceptance of a Computer-Based, Chronic Disease Self-Monitoring System in Patients with Type 2 Diabetes Mellitus and/or Hypertension.” Telemedicine and E-Health 24 (2): 121–129. doi:https://doi.org/10.1089/tmj.2017.0064.
- Yan, M., and C. Or. 2019. “A 12-Week Pilot Study of Acceptance of a Computer-Based Chronic Disease Self-Monitoring System among Patients with Type 2 Diabetes Mellitus and/or Hypertension.” Health Informatics Journal 25 (3): 828–843. doi:https://doi.org/10.1177/1460458217724580.
- Yang, X., R. C. Malak, C. Lauer, C. Weidig, H. Hagen, B. Hamann, J. C. Aurich, and O. Kreylos. 2015. “Manufacturing System Design with Virtual Factory Tools.” International Journal of Computer Integrated Manufacturing 28 (1): 25–40. doi:https://doi.org/10.1080/0951192X.2013.800948.
- Zhu, J., S. K. Ong, and A. Y. C. Nee. 2015. “A Context-Aware Augmented Reality Assisted Maintenance System.” International Journal of Computer Integrated Manufacturing 28 (2): 213–225. doi:https://doi.org/10.1080/0951192X.2013.874589.