References
- Abdmouleh, Z., A. Gastli, L. Ben-Brahim, M. Haouari, and N. A. Al-Emadi. 2017. “Review of Optimization Techniques Applied for the Integration of Distributed Generation from Renewable Energy Sources.” Renewable Energy 113: 266–280. doi:https://doi.org/10.1016/j.renene.2017.05.087.
- Adnan, M. R. H. M., A. Sarkheyli, A. M. Zain, and H. Haron. 2015. “Fuzzy Logic for Modeling Machining Process: A Review.” Artificial Intelligence Review 43 (3): 345–379. doi:https://doi.org/10.1007/s10462-012-9381-8.
- Ahmad, Maznah Iliyas, Yusri Yusof, Md Elias Daud, Kamran Latiff, Aini Zuhra Abdul Kadir, and Yazid Saif. 2020. “Machine Monitoring System: A Decade in Review.” The International Journal of Advanced Manufacturing Technology 108: 1-15.
- Albrecht, A., S. S. Park, Y. Altintas, and G. Pritschow. 2005. “High Frequency Bandwidth Cutting Force Measurement in Milling Using Capacitance Displacement Sensors.” International Journal of Machine Tools and Manufacture 45 (9): 993–1008. doi:https://doi.org/10.1016/j.ijmachtools.2004.11.028.
- Alemohammad, H., E. Toyserkani, and C. P. Paul. 2007. “Fabrication of Smart Cutting Tools with Embedded Optical Fiber Sensors Using Combined Laser Solid Freeform Fabrication and Moulding Techniques.” Optics and Lasers in Engineering 45 (10): 1010–1017. doi:https://doi.org/10.1016/j.optlaseng.2007.04.006.
- Altintaş, Y., and E. Budak. 1995. “Analytical Prediction of Stability Lobes in Milling.” CIRP Annals 44 (1): 357–362. doi:https://doi.org/10.1016/S0007-8506(07)62342-7.
- Altintas, Y., and D. Aslan. 2017. “Integration of Virtual and On-line Machining Process Control and Monitoring.” CIRP Annals 66 (1): 349–352. doi:https://doi.org/10.1016/j.cirp.2017.04.047.
- Astakhov, V. P., and J. C. Outeiro. 2005. “Modeling of the Contact Stress Distribution at the Tool-chip Interface.” Machine Science and Technology 9 (1): 85–99. doi:https://doi.org/10.1081/MST-200051372.
- Astakhov, V. P., and X. Xiao. 2008. “A Methodology for Practical Cutting Force Evaluation Based on the Energy Spent in the Cutting System.” Machining Science and Technology 12 (3): 325–347. doi:https://doi.org/10.1080/10910340802306017.
- Barari, A., H. A. ElMaraghy, G. K. Knopf, and P. Orban. 2004. “Integrated Inspection and Machining Approach to Machining Error Compensation; Advantages and Limitations.” Proceedings of FAIM, Toronto, Canada.
- Barari, A., H. A. ElMaraghy, and P. Orban. 2009. “NURBS Representation of Actual Machined Surfaces.” International Journal of Computer Integrated Manufacturing 22 (5): 395–410. doi:https://doi.org/10.1080/09511920802392730.
- Barari, A., H. A. ElMaraghy, and W. H. ElMaraghy. 2009. “Design for Manufacturing of Sculptured Surfaces: A Computational Platform.” Journal of Computing and Information Science in Engineering 9 (2). doi:https://doi.org/10.1115/1.3130143.
- Behrooz, F., N. Mariun, M. H. Marhaban, M. Radzi, M. Amran, and A. R. Ramli. 2018. “Review of Control Techniques for HVAC systems—Nonlinearity Approaches Based on Fuzzy Cognitive Maps.” Energies 11 (3): 495. doi:https://doi.org/10.3390/en11030495.
- Camposeco-Negrete, C. 2015. “Optimization of Cutting Parameters Using Response Surface Method for Minimizing Energy Consumption and Maximizing Cutting Quality in Turning of AISI 6061 T6 Aluminum.” Journal of Cleaner Production 91: 109–117. doi:https://doi.org/10.1016/j.jclepro.2014.12.017.
- Chen, M., C. Wang, A. Qinglong, and W. Ming. 2018. “Tool Path Strategy and Cutting Process Monitoring in Intelligent Machining.” Frontiers of Mechanical Engineering 13 (2): 232–242. doi:https://doi.org/10.1007/s11465-018-0469-y.
- Chen, S., and T. Zhang. 2018. “Force Control Approaches Research for Robotic Machining Based on Particle Swarm Optimization and Adaptive Iteration Algorithms.” Industrial Robot: An International Journal 45 (1): 141–151. doi:https://doi.org/10.1108/IR-03-2017-0045.
- Chen, X., L. Congbo, Y. Tang, L. Li, Y. Du, and L. Lingling. 2019. “Integrated Optimization of Cutting Tool and Cutting Parameters in Face Milling for Minimizing Energy Footprint and Production Time.” Energy 175: 1021–1037. doi:https://doi.org/10.1016/j.energy.2019.02.157.
- Chen, Y.-L., S. Wang, Y. Shimizu, S. Ito, W. Gao, and J. Bing-Feng. 2015. “An In-process Measurement Method for Repair of Defective Microstructures by Using a Fast Tool Servo with a Force Sensor.” Precision Engineering 39: 134–142. doi:https://doi.org/10.1016/j.precisioneng.2014.08.001.
- D’Mello, G., P. Srinivasa Pai, and N. P. Puneet. 2017. “Optimization Studies in High Speed Turning of Ti-6Al-4V.” Applied Soft Computing 51: 105–115. doi:https://doi.org/10.1016/j.asoc.2016.12.003.
- Deng, Z., H. Jin, H. Ying, H. Yucheng, P. Zhang, W. Tian, and J. Zhang. 2016. “Fuzzy Force Control and State Detection in Vertebral Lamina Milling.” Mechatronics 35: 1–10. doi:https://doi.org/10.1016/j.mechatronics.2016.02.004.
- Denkena, B., D. Dahlmann, and H. Boujnah. 2017. “Tool Deflection Control by a Sensory Spindle Slide for Milling Machine Tools.” Procedia CIRP 62: 329–334. doi:https://doi.org/10.1016/j.procir.2016.06.059.
- Desforges, X., A. Habbadi, and A. Bernard. 2011. “Design Methodology for Smart Actuator Services for Machine Tool and Machining Control and Monitoring.” Robotics and Computer-Integrated Manufacturing 27 (6): 963–976. doi:https://doi.org/10.1016/j.rcim.2011.03.004.
- Deshayes, L., L. Welsch, A. Donmez, R. Ivester, D. Gilsinn, R. Rhorer, E. Whitenton, and F. Potra. 2006. “Smart Machining Systems: Issues and Research Trends.” Proceedings of the 12th CIRP Seminar on Life Cycle Engineering, Innovation in Life Cycle Engineering and Sustainable Development, 363–380. Grenoble, France: Springer
- Dohner, J. L., J. P. Lauffer, T. D. Hinnerichs, N. Shankar, M. Regelbrugge, C.-M. Kwan, X. Roger, B. Winterbauer, and K. Bridger. 2004. “Mitigation of Chatter Instabilities in Milling by Active Structural Control.” Journal of Sound and Vibration 269 (1–2): 197–211. doi:https://doi.org/10.1016/S0022-460X(03)00069-5.
- ElMaraghy, H. A., A. Barari, and G. K. Knopf. 2004. “Integrated Inspection and Machining for Maximum Conformance to Design Tolerances.” CIRP Annals 53 (1): 411–416. doi:https://doi.org/10.1016/S0007-8506(07)60728-8.
- Gao, J., and Y. Altintas. 2019. “Development of a Three-Degree-of-Freedom Ultrasonic Vibration Tool Holder for Milling and Drilling.” IEEE/ASME Transactions on Mechatronics 24 (3): 1238–1247. doi:https://doi.org/10.1109/TMECH.2019.2906904.
- Gao, X., W. Mou, and Y. Peng. 2016. “An Intelligent Process Planning Method Based on Feature-based History Machining Data for Aircraft Structural Parts.” Procedia CIRP 56: 585–589. doi:https://doi.org/10.1016/j.procir.2016.10.115.
- Ghosh, G., P. Mandal, and S. C. Mondal. 2019. “Modeling and Optimization of Surface Roughness in Keyway Milling Using ANN, Genetic Algorithm, and Particle Swarm Optimization.” The International Journal of Advanced Manufacturing Technology 100 (5–8): 1223–1242. doi:https://doi.org/10.1007/s00170-017-1417-4.
- Ghosh, N., Y. B. Ravi, A. Patra, S. Mukhopadhyay, S. Paul, A. R. Mohanty, and A. B. Chattopadhyay. 2007. “Estimation of Tool Wear during CNC Milling Using Neural Network-based Sensor Fusion.” Mechanical Systems and Signal Processing 21 (1): 466–479. doi:https://doi.org/10.1016/j.ymssp.2005.10.010.
- Gran, S. S., I. Ismail, T. A. Ajol, and A. F. Abang Ibrahim. 2015. “Mixed Integer Programming Model for Flexible Job-shop Scheduling Problem (FJSP) to Minimize Makespan and Total Machining Time.” 2015 International Conference on Computer, Communications, and Control Technology (I4CT)
- Gupta, M. K., P. K. Sood, and V. S. Sharma. 2016. “Optimization of Machining Parameters and Cutting Fluids during Nano-fluid Based Minimum Quantity Lubrication Turning of Titanium Alloy by Using Evolutionary Techniques.” Journal of Cleaner Production 135: 1276–1288. doi:https://doi.org/10.1016/j.jclepro.2016.06.184.
- He, Y., L. Yufeng, W. Tao, and J. W. Sutherland. 2015. “An Energy-responsive Optimization Method for Machine Tool Selection and Operation Sequence in Flexible Machining Job Shops.” Journal of Cleaner Production 87: 245–254. doi:https://doi.org/10.1016/j.jclepro.2014.10.006.
- Hegab, H., W. Abdelfattah, S. Rahnamayan, A. Mohany, and H. Kishawy. 2018. “Multi-objective Optimization during Machining Ti-6Al-4V Using Nano-fluids.” Canadian Society for Mechanical Engineering (CSME) International Congress 2018, York University, Toronto, Canada.
- Huang, P. B. 2016. “An Intelligent Neural-fuzzy Model for an In-process Surface Roughness Monitoring System in End Milling Operations.” Journal of Intelligent Manufacturing 27 (3): 689–700. doi:https://doi.org/10.1007/s10845-014-0907-6.
- Huang, P. B., M. Cheng-Chieh, and C.-H. Kuo. 2015. “A PNN Self-learning Tool Breakage Detection System in End Milling Operations.” Applied Soft Computing 37: 114–124. doi:https://doi.org/10.1016/j.asoc.2015.08.019.
- Huang, R.-H., and Y. Shun-Chi. 2016. “Two-stage Multiprocessor Flow Shop Scheduling with Deteriorating Maintenance in Cleaner Production.” Journal of Cleaner Production 135: 276–283. doi:https://doi.org/10.1016/j.jclepro.2016.06.109.
- Imani, B. M., H. El-Mounayri, and S. A. Hosseini. 2007. “Analytical Chip Load Prediction for Rough End Mills.” 2nd Tehran International Congress on Manufacturing Engineering-TICME2007
- Jarvis, P., S. A. Parsons, and R. Smith. 2007. “Modeling Bromate Formation during Ozonation.” Ozone: Science and Engineering 29 (6): 429–442. doi:https://doi.org/10.1080/01919510701643732.
- Jemielniak, K., and P. J. Arrazola. 2008. “Application of AE and Cutting Force Signals in Tool Condition Monitoring in Micro-milling.” CIRP Journal of Manufacturing Science and Technology 1 (2): 97–102. doi:https://doi.org/10.1016/j.cirpj.2008.09.007.
- Kang, M. C., J. S. Kim, and J. H. Kim. 2001. “A Monitoring Technique Using A Multi-sensor in High Speed Machining.” Journal of Materials Processing Technology 113 (1–3): 331–336. doi:https://doi.org/10.1016/S0924-0136(01)00698-7.
- Karam, S., P. Centobelli, D. M. D’Addona, and R. Teti. 2016. “Online Prediction of Cutting Tool Life in Turning via Cognitive Decision Making.” Procedia Cirp 41: 927–932. doi:https://doi.org/10.1016/j.procir.2016.01.002.
- Kim, D., and D. Jeon. 2011. “Fuzzy-logic Control of Cutting Forces in CNC Milling Processes Using Motor Currents as Indirect Force Sensors.” Precision Engineering 35 (1): 143–152. doi:https://doi.org/10.1016/j.precisioneng.2010.09.001.
- Kim, Dong-Hyeon, Thomas JY Kim, Xinlin Wang, Mincheol Kim, Ying-Jun Quan, Jin Woo Oh, Soo-Hong Min, Hyungjung Kim, Binayak Bhandari, and Insoon Yang. 2018. “Smart machining process using machine learning: A review and perspective on machining industry.” International Journal of Precision Engineering and Manufacturing-Green Technology 5 (4):555–568.
- Kim, J.-D., and I.-H. Choi. 1996. “Development of a Tool Failure Detection System Using Multi-sensors.” International Journal of Machine Tools and Manufacture 36 (8): 861–870. doi:https://doi.org/10.1016/0890-6955(96)00115-0.
- Kishawy, H. A., H. Hegab, U. Umer, and A. Mohany. 2018. “Application of Acoustic Emissions in Machining Processes: Analysis and Critical Review.” The International Journal of Advanced Manufacturing Technology 98 (5–8): 1391–1407. doi:https://doi.org/10.1007/s00170-018-2341-y.
- Kishawy, H. A., S. Kannan, and M. Balazinski. 2005. “Analytical Modeling of Tool Wear Progression during Turning Particulate Reinforced Metal Matrix Composites.” CIRP Annals 54 (1): 55–58. doi:https://doi.org/10.1016/S0007-8506(07)60048-1.
- Kongchuenjai, J., and S. Prombanpong. 2017. “An Integer Programming Approach for Process Planning for Mixed-model Parts Manufacturing on a CNC Machining Center.” Advances in Production Engineering & Management 12 (3): 274. doi:https://doi.org/10.14743/apem2017.3.258.
- Kras, A., F. Bourgain, and F. Claeyssen. 2014. “Amplified Piezo Actuator APA® with Viscoelastic Material for Machine Tool Semi-active Damping System.” Journal of Machine Engineering 14.
- Kuljanic, E., G. Totis, and M. Sortino. 2009. “Development of an Intelligent Multisensor Chatter Detection System in Milling.” Mechanical Systems and Signal Processing 23 (5): 1704–1718. doi:https://doi.org/10.1016/j.ymssp.2009.01.003.
- Lee, J. M., D. K. Choi, J. Kim, and C. N. Chu. 1995. “Real-time Tool Breakage Monitoring for NC Milling Process.” CIRP Annals 44 (1): 59–62. doi:https://doi.org/10.1016/S0007-8506(07)62275-6.
- Li, C., X. Chen, Y. Tang, and L. Li. 2017. “Selection of Optimum Parameters in Multi-pass Face Milling for Maximum Energy Efficiency and Minimum Production Cost.” Journal of Cleaner Production 140: 1805–1818. doi:https://doi.org/10.1016/j.jclepro.2016.07.086.
- Li, L., F. Liu, B. Chen, and C. B. Li. 2015a. “Multi-objective Optimization of Cutting Parameters in Sculptured Parts Machining Based on Neural Network.” Journal of Intelligent Manufacturing 26 (5): 891–898. doi:https://doi.org/10.1007/s10845-013-0809-z.
- Li, X., A. Djordjevich, and P. K. Venuvinod. 2000. “Current-sensor-based Feed Cutting Force Intelligent Estimation and Tool Wear Condition Monitoring.” IEEE Transactions on Industrial Electronics 47 (3): 697–702. doi:https://doi.org/10.1109/41.847910.
- Li, Y., C. Liu, J. X. Gao, and W. Shen. 2015b. “An Integrated Feature-based Dynamic Control System for On-line Machining, Inspection and Monitoring.” Integrated Computer-Aided Engineering 22 (2): 187–200. doi:https://doi.org/10.3233/ICA-150483.
- Liang, S., M. Rajora, X. Liu, C. Yue, P. Zou, and L. Wang. 2018. “Intelligent Manufacturing Systems: A Review.” International Journal of Mechanical Engineering and Robotics Research 7 (3): 324–330. doi:https://doi.org/10.18178/ijmerr.7.3.324-330.
- Liu, L.-L., G.-P. Zhao, S.-S. Ou’Yang, and Y.-J. Yang. 2011. “Integrating Theory of Constraints and Particle Swarm Optimization in Order Planning and Scheduling for Machine Tool Production.” The International Journal of Advanced Manufacturing Technology 57 (1–4): 285–296. doi:https://doi.org/10.1007/s00170-011-3294-6.
- Liu, L.-L., H. Rong-Song, H. Xiang-Ping, G.-P. Zhao, and S. Wang. 2015. “A Hybrid PSO-GA Algorithm for Job Shop Scheduling in Machine Tool Production.” International Journal of Production Research 53 (19): 5755–5781. doi:https://doi.org/10.1080/00207543.2014.994714.
- Li, Zhou-Long, Oguzhan Tuysuz, Li-Min Zhu, and Yusuf Altintas. 2018. “Surface Form Error Prediction in Five-axis Flank Milling of Thin-walled Parts.” International Journal of Machine Tools and Manufacture 128: 21–32. doi:https://doi.org/10.1016/j.ijmachtools.2018.01.005.
- Luo, M., H. Luo, D. Axinte, D. Liu, J. Mei, and Z. Liao. 2018. “A Wireless Instrumented Milling Cutter System with Embedded PVDF Sensors.” Mechanical Systems and Signal Processing 110: 556–568. doi:https://doi.org/10.1016/j.ymssp.2018.03.040.
- Lüthje, H., R. Bandorf, S. Biehl, and B. Stint. 2004. “Thin Film Sensor for Wear Detection of Cutting Tools.” Sensors and Actuators A: Physical 116 (1): 133–136. doi:https://doi.org/10.1016/j.sna.2004.03.049.
- Ma, L., S. N. Melkote, J. B. Morehouse, J. B. Castle, J. W. Fonda, and M. A. Johnson. 2012. “Thin-film PVDF Sensor-based Monitoring of Cutting Forces in Peripheral End Milling.” Journal of Dynamic Systems, Measurement, and Control 134 (5): 051014. doi:https://doi.org/10.1115/1.4006366.
- Mahboubkhah, M., S. Akhbari, and A. Barari. 2019. “Self-Configuration Machining Capability of a 4-DOF Parallel Kinematic Machine Tool with Nonsingular Workspace for Intelligent Manufacturing Systems.” IFAC-PapersOnLine 52 (10): 288–293. doi:https://doi.org/10.1016/j.ifacol.2019.10.044.
- Min, B.-K., G. O’Neal, Y. Koren, and Z. Pasek. 2002. “A Smart Boring Tool for Process Control.” Mechatronics 12 (9–10): 1097–1114. doi:https://doi.org/10.1016/S0957-4158(02)00020-X.
- Mo, J. P. T., and S. Ding. 2019. “Systems Engineering for Machining.” In Systems Engineering in Research and Industrial Practice: Foundations, Developments and Challenges, edited by J. Stjepandić, N. Wognum, and W. J. C. Verhagen, 297–331. Cham: Springer International Publishing.
- Mohapatra, P., A. Nayak, S. K. Kumar, and M. K. Tiwari. 2015. “Multi-objective Process Planning and Scheduling Using Controlled Elitist Non-dominated Sorting Genetic Algorithm.” International Journal of Production Research 53 (6): 1712–1735. doi:https://doi.org/10.1080/00207543.2014.957872.
- Möhring, H.-C., K. M. Litwinski, and G. Olaf. 2010. “Process Monitoring with Sensory Machine Tool Components.” CIRP Annals 59 (1): 383–386. doi:https://doi.org/10.1016/j.cirp.2010.03.087.
- Moreira, L. C., W. D. Li, X. Lu, and M. E. Fitzpatrick. 2019. “Supervision Controller for Real-time Surface Quality Assurance in CNC Machining Using Artificial Intelligence.” Computers & Industrial Engineering 127: 158–168. doi:https://doi.org/10.1016/j.cie.2018.12.016.
- Mukherjee, I., and P. K. Ray. 2006. “A Review of Optimization Techniques in Metal Cutting Processes.” Computers & Industrial Engineering 50 (1–2): 15–34. doi:https://doi.org/10.1016/j.cie.2005.10.001.
- Neslušan, M., B. Mičieta, A. Mičietová, M. Čilliková, and I. Mrkvica. 2015. “Detection of Tool Breakage during Hard Turning through Acoustic Emission at Low Removal Rates.” Measurement 70: 1–13. doi:https://doi.org/10.1016/j.measurement.2015.03.035.
- Nouiri, M., A. Bekrar, A. Jemai, D. Trentesaux, A. C. Ammari, and S. Niar. 2017. “Two Stage Particle Swarm Optimization to Solve the Flexible Job Shop Predictive Scheduling Problem considering Possible Machine Breakdowns.” Computers & Industrial Engineering 112: 595–606. doi:https://doi.org/10.1016/j.cie.2017.03.006.
- O’Driscoll, E., K. Kelly, and G. E. O’Donnell. 2015. “Intelligent Energy Based Status Identification as a Platform for Improvement of Machine Tool Efficiency and Effectiveness.” Journal of Cleaner Production 105: 184–195. doi:https://doi.org/10.1016/j.jclepro.2015.01.058.
- O’Regan, S. D., J. Miesner, R. Aiken, A. Packman, E. A. Unver, and S. Akerley. 1994. “Machine Tool Chatter Reduction via Active Structural Control” Second European conference on smart structures and materials, Glasgow, United Kingdom.
- Pratt, J. R., and A. H. Nayfeh. 1998. “Smart Structures for Chatter Control.” Smart Structures and Materials 1998: Smart Structures and Integrated Systems, San Diego, California. USA.
- Radovanović, M. 2019. “Multi-objective Optimization of Multi-pass Turning AISI 1064 Steel.” The International Journal of Advanced Manufacturing Technology 100 (1–4): 87–100. doi:https://doi.org/10.1007/s00170-018-2689-z.
- Rangel-Magdaleno, J., R. Romero-Troncoso, R. Osornio-Rios, and E. Cabal-Yepez. 2009. “Novel Oversampling Technique for Improving Signal-to-quantization Noise Ratio on Accelerometer-based Smart Jerk Sensors in CNC Applications.” Sensors 9 (5): 3767–3789. doi:https://doi.org/10.3390/s90503767.
- Saikumar, S., and M. S. Shunmugam. 2012. “Development of a Feed Rate Adaption Control System for High-speed Rough and Finish End-milling of Hardened EN24 Steel.” The International Journal of Advanced Manufacturing Technology 59 (9–12): 869–884. doi:https://doi.org/10.1007/s00170-011-3561-6.
- Sallese, L., N. Grossi, J. Tsahalis, A. Scippa, and G. Campatelli. 2016. “Intelligent Fixtures for Active Chatter Control in Milling.” Procedia CIRP 55: 176–181. doi:https://doi.org/10.1016/j.procir.2016.08.019.
- Sarhan, A., A. Diaa, A. Matsubara, M. Sugihara, H. Saraie, S. Ibaraki, and Y. Kakino. 2006. “Monitoring Method of Cutting Force by Using Additional Spindle Sensors.” JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing 49 (2): 307–315.
- Šeda, M. 2007. “Mathematical Models of Flow Shop and Job Shop Scheduling Problems.” World Academy of Science, Engineering and Technology 1 (31): 122–127.
- Shiba, K., D. Yamamoto, S. Chanthapan, H. Hosaka, K. Sasaki, and K. Itao. 2003. “Development of a Miniature Abrasion-detecting Device for a Small Precision Lathe.” Sensors and Actuators A: Physical 109 (1–2): 137–142. doi:https://doi.org/10.1016/j.sna.2003.09.013.
- Shu, S., K. Cheng, H. Ding, and S. Chen. 2013. “An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool.” Journal of Manufacturing Science and Engineering 135 (6): 061018. doi:https://doi.org/10.1115/1.4025742.
- Sims, N. D., P. V. Bayly, and K. A. Young. 2005. “Piezoelectric Sensors and Actuators for Milling Tool Stability Lobes.” Journal of Sound and Vibration 281 (3–5): 743–762. doi:https://doi.org/10.1016/j.jsv.2004.02.014.
- Stavropoulos, P., A. Papacharalampopoulos, E. Vasiliadis, and G. Chryssolouris. 2016. “Tool Wear Predictability Estimation in Milling Based on Multi-sensorial Data.” The International Journal of Advanced Manufacturing Technology 82 (1–4): 509–521. doi:https://doi.org/10.1007/s00170-015-7317-6.
- Sugita, N., K. Ishii, T. Furusho, K. Harada, and M. Mitsuishi. 2015. “Cutting Temperature Measurement by a Micro-sensor Array Integrated on the Rake Face of a Cutting Tool.” CIRP Annals 64 (1): 77–80. doi:https://doi.org/10.1016/j.cirp.2015.04.079.
- Sun, X., R. Bateman, K. Cheng, and S. C. Ghani. 2012. “Design and Analysis of an Internally Cooled Smart Cutting Tool for Dry Cutting.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226 (4): 585–591.
- Suprock, C. A., and J. S. Nichols. 2009. “A Low Cost Wireless High Bandwidth Transmitter for Sensor-integrated Metal Cutting Tools and Process Monitoring.” International Journal of Mechatronics and Manufacturing Systems 2 (4): 441–454. doi:https://doi.org/10.1504/IJMMS.2009.027128.
- Sze-Wei, G., L. Han-Seok, M. Rahman, and F. Watt. 2007. “A Fine Tool Servo System for Global Position Error Compensation for A Miniature Ultra-precision Lathe.” International Journal of Machine Tools and Manufacture 47 (7–8): 1302–1310. doi:https://doi.org/10.1016/j.ijmachtools.2006.08.023.
- Takagi, T., T. Takeno, and H. Miki. 2010. “Metal-containing Diamond-like Carbon Coating as a Smart Sensor.” Materials Science Forum 638-642: 2103–2108. www.scientific.net/MSF.638-642.2103.
- Tang, D., M. Dai, M. A. Salido, and A. Giret. 2016. “Energy-efficient Dynamic Scheduling for a Flexible Flow Shop Using an Improved Particle Swarm Optimization.” Computers in Industry 81: 82–95. doi:https://doi.org/10.1016/j.compind.2015.10.001.
- Tansel, I., A. Nedbouyan, M. Trujillo, and B. Tansel. 1998. “Micro-end-milling—II. Extending Tool Life with a Smart Workpiece Holder (SWH).” International Journal of Machine Tools and Manufacture 38 (12): 1437–1448. doi:https://doi.org/10.1016/S0890-6955(98)00016-9.
- Trejo-Hernandez, M., R. A. Osornio-Rios, R. De Jesus Romero-troncoso, C. Rodriguez-Donate, A. Dominguez-Gonzalez, and G. Herrera-Ruiz. 2010. “FPGA-based Fused Smart-sensor for Tool-wear Area Quantitative Estimation in CNC Machine Inserts.” Sensors 10 (4): 3373–3388. doi:https://doi.org/10.3390/s100403373.
- Wang, C., R. Rakowski, and K. Cheng. 2013. “Design and Analysis of a Piezoelectric Film Embedded Smart Cutting Tool.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227 (2): 254–260. doi:https://doi.org/10.1177/0954405412462785.
- Wang, C., S. B. C. Ghani, K. Cheng, and R. Rakowski. 2013. “Adaptive Smart Machining Based on Using Constant Cutting Force and a Smart Cutting Tool.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227 (2): 249–253. doi:https://doi.org/10.1177/0954405412466233.
- Wang, S., X. Lu, X. X. Li, and W. D. Li. 2015. “A Systematic Approach of Process Planning and Scheduling Optimization for Sustainable Machining.” Journal of Cleaner Production 87: 914–929.
- Wright, P., D. Dornfeld, and N. Ota. 2008. “Condition Monitoring in End-milling Using Wireless Sensor Networks (Wsns).” Transactions of NAMRI/SME (36): 177-183.
- Wu, Y.-C., W.-P. Lee, and C.-W. Chien. 2011. “Modified the Performance of Differential Evolution Algorithm with Dual Evolution Strategy.” International conference on machine learning and computing
- Xie, Z., L. Yong, and L. Jianguang. 2017. “Development and Testing of an Integrated Smart Tool Holder for Four-component Cutting Force Measurement.” Mechanical Systems and Signal Processing 93: 225–240. doi:https://doi.org/10.1016/j.ymssp.2017.01.038.
- Yan, J., L. Lin, F. Zhao, F. Zhang, Q. Zhao, M. K. Gupta, P. K. Sood, and V. S. Sharma. 2016. “A Multi-level Optimization Approach for Energy-efficient Flexible Flow Shop Scheduling.” Journal of Cleaner Production 137: 1543–1552. doi:https://doi.org/10.1016/j.jclepro.2016.06.161.
- Ye, Y., H. Tianliang, Y. Yang, W. Zhu, and C. Zhang. 2018. “A Knowledge Based Intelligent Process Planning Method for Controller of Computer Numerical Control Machine Tools.” Journal of Intelligent Manufacturing 31 (7): 1751-1767.
- Yin, L., L. Xinyu, L. Gao, L. Chao, and Z. Zhang. 2017. “Energy-efficient Job Shop Scheduling Problem with Variable Spindle Speed Using a Novel Multi-objective Algorithm.” Advances in Mechanical Engineering 9 (4): 1687814017695959. doi:https://doi.org/10.1177/1687814017695959.
- Zhang, L., J. Feng, Y. Wang, and M. Chen. 2009. “Feedrate Scheduling Strategy for Free-form Surface Machining through an Integrated Geometric and Mechanistic Model.” The International Journal of Advanced Manufacturing Technology 40 (11–12): 1191–1201. doi:https://doi.org/10.1007/s00170-008-1424-6.
- Zhang, Y., and N. D. Sims. 2005. “Milling Workpiece Chatter Avoidance Using Piezoelectric Active Damping: A Feasibility Study.” Smart Materials and Structures 14 (6): N65. doi:https://doi.org/10.1088/0964-1726/14/6/N01.
- Zhang, Z., R. Tang, T. Peng, L. Tao, and S. Jia. 2016. “A Method for Minimizing the Energy Consumption of Machining System: Integration of Process Planning and Scheduling.” Journal of Cleaner Production 137: 1647–1662. doi:https://doi.org/10.1016/j.jclepro.2016.03.101.
- Zheng, P., Z. Sang, R. Y. Zhong, Y. Liu, C. Liu, K. Mubarok, Y. Shiqiang, and X. Xun. 2018. “Smart Manufacturing Systems for Industry 4.0: Conceptual Framework, Scenarios, and Future Perspectives.” Frontiers of Mechanical Engineering 13 (2): 137–150. doi:https://doi.org/10.1007/s11465-018-0499-5.
- Zhou, G., L. Qi, Z. Xiao, C. Zhou, and C. Tian. 2019. “Cutting Parameter Optimization for Machining Operations considering Carbon Emissions.” Journal of Cleaner Production 208: 937–950. doi:https://doi.org/10.1016/j.jclepro.2018.10.191.
- Zhou, J.-H., C. K. Pang, F. L. Lewis, and Z.-W. Zhong. 2009. “Intelligent Diagnosis and Prognosis of Tool Wear Using Dominant Feature Identification.” IEEE Transactions on Industrial Informatics 5 (4): 454–464. doi:https://doi.org/10.1109/TII.2009.2023318.
- Zuperl, U., F. Cus, and M. Milfelner. 2005. “Fuzzy Control Strategy for an Adaptive Force Control in End-milling.” Journal of Materials Processing Technology 164: 1472–1478. doi:https://doi.org/10.1016/j.jmatprotec.2005.02.143.