250
Views
3
CrossRef citations to date
0
Altmetric
Research Article

Experimental approach towards parameter evaluation in laser powder bed fusion of metals

&
Pages 556-567 | Received 10 Mar 2020, Accepted 03 Mar 2021, Published online: 21 Mar 2021

References

  • acatech. 2016. “Additive Fertigung.”.
  • Ahmad, A. 2018. “Correlation between Porosity and Processing Parameters in CoCr Parts Produced by Selective Laser Melting.” not published internship report under the supervision of A. Huxol and F.-J. Villmer.
  • Ampower GmbH&Co.KG. 2018. “Quality in Additive Manufacturing: Best Practices for Quality Management in Additive Manufacturing.” 4. Accessed 31 August 2019. https://am-power.de/insights/additive-fertigung-qualitaet/
  • Berger, U., A. Hartmann, and D. Schmid. 2019. 3D-Druck - Additive Fertigungsverfahren: Rapid Prototyping, Rapid Tooling, Rapid Manufacturing, 3. Auflage. Haan: Europa-Lehrmittel.
  • Bhargav, A., V. Sanjairaj, V. Rosa, L. W. Feng, and J. F. Yh. 2017. “Applications of Additive Manufacturing in Dentistry: A Review.” Journal of Biomedical Materials Research. Part B, Applied Biomaterials 106 (5): 2058–2064. doi:https://doi.org/10.1002/jbm.b.33961.
  • Breuninger, J., R. Becker, and A. Wolf. 2013. Generative Fertigung mit Kunststoffen: Konzeption und Konstruktion für Selektives Lasersintern. Berlin Heidelberg: Springer Berlin Heidelberg. doi:https://doi.org/10.1007/978-3-642-24325-7.
  • “CECIMO European Additive Manufacturing Strategy.” 2017. Accessed 19 July 2018. https://www.cecimo.eu/wp-content/uploads/2019/03/AM_European_Strategy_2017_LQ.pdf
  • Cherry, J. A., H. M. Davies, S. Mehmood, N. P. Lavery, S. G. R. Brown, and J. Sienz. 2015. “Investigation into the Effect of Process Parameters on Microstructural and Physical Properties of 316L Stainless Steel Parts by Selective Laser Melting.” The International Journal of Advanced Manufacturing Technology 76 (5–8): 869–879. doi:https://doi.org/10.1007/s00170-014-6297-2.
  • DIN. 2017. DIN EN ISO 6892-1: Metallische Werkstoffe - Zugversuch - Teil 1: Prüfverfahren bei Raumtemperatur. no. 6892-1. Berlin: Beuth. 2017.
  • Eisen, M. A. 2010. “Optimierte Parameterfindung und prozessorientiertes Qualitätsmanagement für das Selective Laser Melting Verfahren.” Dissertation, Fakultät für Ingenieurwissenschaften, Abt. Maschinenbau, Universität Duisburg-Essen.
  • Electric, G. 2018. “The Blade Runners: This Factory Is 3D Printing Turbine Parts For The World’s Largest Jet Engine - GE Reports.” Accessed 20 December 2019. https://www.ge.com/reports/future-manufacturing-take-look-inside-factory-3d-printing-jet-engine-parts/
  • Grund, M. 2015. Implementierung von schichtadditiven Fertigungsverfahren. Berlin. Heidelberg: Springer Berlin Heidelberg. Accessed 21 December 2017.
  • Huxol, A. 2020. “Beitrag zur Qualitätssicherung in der Herstellung von individuellen Produkten aus CoCr.” Dr.-Ing. Dissertation, Universität Paderborn.
  • Huxol, A., E. M. Scheideler, and F.-J. Villmer. 2017. “Influencing Factors on Part Quality in Selective Laser Melting.” In Production engineering and management: Proceedings 7th international conference, September 28 and 29, 2017, Pordenone, Italy, edited by E. Padoano and F.-J. Villmer, 13–24. Lemgo: Hochschule Ostwestfalen-Lippe.
  • Huxol, A., E. M. Scheideler, and F.-J. Villmer. 2018. “Process Capability Analysis in Metal Additive Manufacturing.” In Direct Digital Maufacturing Confernce 2018. Stuttgart: Fraunhofer Verlag.
  • Huxol, A., and F.-J. Villmer. 2018. “Process Control for Selective Laser Melting - Opportunities and Limitations.” In Production engineering and management: Proceedings 8th international conference, October 04 and 05, 2018, Lemgo, Germany, edited by F.-J. Villmer and E. Padoano, 17–28. Publication series in direct digital manufacturing Volume 2018, 01. Lemgo: Hochschule Ostwestfalen-Lippe.
  • Huxol, A., and F.-J. Villmer 2019. “DoE Methods for Parameter Evaluation in Selective Laser Melting.” In 13th IFAC Workshop on Intelligent Manufacturing Systems IMS 2019: Oshawa, Canada, 12-14 August 2019, edited by A. Barari, 270–75 52-10: Elsevier.
  • Jmp 14 Design Of Experiments Guide. 2018. “SAS Institute”. Accessed 04 December 2020, https://www.jmp.com/support/help/en/15.2/index.shtml#page/jmp/introduction-to-doe.shtml
  • Jones, B., and C. J. Nachtsheim. 2017. “A Class of Three-Level Designs for Definitive Screening in the Presence of Second-Order Effects.” Journal of Quality Technology 43 (1): 1–15. doi:https://doi.org/10.1080/00224065.2011.11917841.
  • Mani, M., B. Lane, A. Donmez, S. Feng, S. Moylan, and R. Fesperman. 2015. “Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes: National Institute of Standards and Technology.” Accessed May 31: 2016.
  • O’Regan, P., P. Prickett, R. Setchi, G. Hankins, and N. Jones. 2016. “Metal Based Additive Layer Manufacturing: Variations, Correlations and Process Control.” Procedia Computer Science 96: 216–224. doi:https://doi.org/10.1016/j.procs.2016.08.134.
  • Popov, V. V., G. Muller-Kamskii, A. Kovalevsky, G. Dzhenzhera, E. Strokin, A. Kolomiets, and J. Ramon. 2018. “Design and 3D-printing of Titanium Bone Implants: Brief Review of Approach and Clinical Cases.” Biomedical Engineering Letters 8 (4): 337–344. doi:https://doi.org/10.1007/s13534-018-0080-5.
  • Prashanth, K. G., S. Scudino, T. Maity, J. Das, and J. Eckert. 2017. “Is the Energy Density a Reliable Parameter for Materials Synthesis by Selective Laser Melting?” Materials Research Letters 32 (6): 386–390. doi:https://doi.org/10.1080/21663831.2017.1299808.
  • Rushing, H., D. C. Andrew Karl, Montgomery, and J. Wisnowski. 2013. Design and Analysis of Experiments by Douglas Montgomery: A Supplement for Using JMP. Cary, NC: SAS Institute. http://proquest.tech.safaribooksonline.de/9781612907253
  • Scheideler, E. M., and A. Ahlemeyer-Stubbe. 2017. “Quality Control of Additive Manufacturing Using Statistical Prediction Methods.” In In Production engineering and management: Proceedings 7th international conference, 28 and 29 September 2017, Pordenone, Italy, edited by E. Padoano and F.-J. Villmer, 3–12. Lemgo: Hochschule Ostwestfalen-Lippe.
  • Schuh, G., C. Reuter, A. Hauptvogel, and D. Christian. 2015. “Hypotheses for a Theory of Production in the Context of Industrie 4.0.” In Advances in Production Technology, edited by C. Brecher, 11–23. Lecture Notes in Production Engineering. Cham: Springer International Publishing.
  • Simoni, F. 2018. “Analysis of Influencing Parameters on Mechanical and Physical Properties of SLM Parts.” not published Master Thesis, Università degli studi di Trieste; under supervision of Prof. Dr. N. Scuor, Prof. Dr.-Ing. F.-J. Villmer, A. Huxol.
  • Spears, T. G., and S. A. Gold. 2016. “In-process Sensing in Selective Laser Melting (SLM) Additive Manufacturing.” Integrating Materials and Manufacturing Innovation 5 (1): 683. doi:https://doi.org/10.1186/s40192-016-0045-4.
  • Statista. 2018. “Additive Fertigung.” Accessed 06 May 2019. https://de.statista.com/statistik/studie/id/29177/dokument/additive-fertigung-statista-dossier/
  • VDI. 2013. “VDI 3405, Blatt 2: Additive Fertigungsverfahren Strahlschmelzen metallischer Bauteile Qualifizierung, Qualitätssicherung und Nachbearbeitung”, no. 3405 Blatt 2. Berlin: Beuth. Accessed 30 November 2017
  • VDI. 2014a. Additive Fertigungsverfahren VDI-Statusreport. Düsseldorf: VDI.
  • VDI. 2014b. “VDI 3405: Additive Fertigungsverfahren Grundlagen, Begriffe, Verfahrensbeschreibungen, no. 3405. Berlin: Beuth.” Accessed 30 November 2017
  • Wass, J. A. 2010. “First Steps in Experimental Design - the Screening Experiment.” Journal of Validation Technology. Spring 2010. 49ff. https://pdfs.semanticscholar.org/f2da/239b332426fed75df0c6b2cd0c5b58b87244.pdf Accessed 03 May 2019
  • Yadroitsev, I., I. Yadroitsava, P. Bertrand, and I. Smurov. 2012. “Factor Analysis of Selective Laser Melting Process Parameters and Geometrical Characteristics of Synthesized Single Tracks.” Rapid Prototyping Journal 18 (3): 201–208. doi:https://doi.org/10.1108/13552541211218117.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.