References
- Abenhaim, G. N., A. S. Tahan, A. Desrochers, and R. Maranzana. 2011. “A Novel Approach for the Inspection of Flexible Parts without the Use of Special Fixtures.” Journal of Manufacturing Science and Engineering, Transactions of the ASME 133 (1). doi:https://doi.org/10.1115/1.4003335.
- Affan Badar, M., S. Raman, and P. S. Pulat. 2003. “Intelligent Search-Based Selection of Sample Points for Straightness and Flatness Estimation.” Journal of Manufacturing Science and Engineering 125 (2): 263. doi:https://doi.org/10.1115/1.1556859.
- Bajaj, C., and G. Farin. 1990. “Curves and Surfaces for Computer Aided Geometric Design--A Practical Guide.” In Mathematics of Computation, vols. 55, Issue 192. Elsevier. doi:https://doi.org/10.2307/2008458.
- Bajaj, C. L., and G. Xu. 2003. “Anisotropic Diffusion of Surfaces and Functions on Surfaces.” ACM Transactions on Graphics 22 (1): 4–32. doi:https://doi.org/10.1145/588272.588276.
- Barari, A. 2011. “Automotive body inspection uncertainty associated with computational processes” International journal of vehicle design, vol. 57 no. 2-3, pp. 230–241.
- Barari, A. 2012. Estimation of Detailed Deviation Zone of Inspected Surfaces. 18–26. doi:https://doi.org/10.1142/9789814397957_0003.
- Barari, A., H. A. ElMaraghy, G. K. Knopf, and P. Orban 2004. “Integrated Inspection and Machining Approach to Machining Error Compensation: Advantages and Limitations.” Flexible Automation and Intelligent Manufacturing (FAIM 2004), Toronto, Canad.
- Barari, A., H. A. ElMaraghy, and P. Orban. 2009. “NURBS Representation of Estimated Surfaces Resulting from Machining Errors.” International Journal of Computer Integrated Manufacturing 22 (5): 395–410. doi:https://doi.org/10.1080/09511920802392730.
- Barari, A., and S. Jamiolahmadi. 2016. “Convergence of a Finite Difference Approach for Detailed Deviation Zone Estimation in Coordinate Metrology.” Acta Imeko 4 (4): 20. doi:https://doi.org/10.21014/acta_imeko.v4i4.271.
- Barari, A., and S. Mordo. 2013. “Effect of Sampling Strategy on Uncertainty and Precision of Flatness Inspection Studied by Dynamic Minimum Deviation Zone Evaluation.” International Journal of Metrology and Quality Engineering 4 (1): 3–8. doi:https://doi.org/10.1051/ijmqe/2012039.
- Clarenz, U., U. Diewald, and M. Rumpf 2000. “Anisotropic Geometric Diffusion in Surface Processing.” https://ieeexplore.ieee.org/abstract/document/885721/
- Dhanish, P. B., and J. Mathew. 2006. “Effect of CMM Point Coordinate Uncertainty on Uncertainties in Determination of Circular Features.” Measurement: Journal of the International Measurement Confederation 39 (6): 522–531. doi:https://doi.org/10.1016/j.measurement.2005.12.005.
- Diewald, U., T. Preuûer, and M. Rumpf forthcoming. “Anisotropic Diffusion in Vector Field Visualization on Euclidean Domains and Surfaces.” ieeexplore.ieee.org. Accessed 13 January 2021. https://ieeexplore.ieee.org/abstract/document/856995/
- ElMaraghy, H. A., A. Barari, and G. K. Knopf. 2004. “Integrated Inspection and Machining for Maximum Conformance to Design Tolerances.” CIRP Annal 53 (1): 411–416. doi:https://doi.org/10.1016/S0007-8506(07)60728-8.
- Feng, C.-X. J., A. L. Saal, J. G. Salsbury, A. R. Ness, and G. C. S. Lin. 2007. “Design and Analysis of Experiments in CMM Measurement Uncertainty Study.” Precision Engineering 31 (2): 94–101. doi:https://doi.org/10.1016/J.PRECISIONENG.2006.03.003.
- Gohari, H., and A. Barari. 2016a. “A Quick Deviation Zone Fitting in Coordinate Metrology of NURBS Surfaces Using Principle Component Analysis.” Measurement: Journal of the International Measurement Confederation 92: 352–364. doi:https://doi.org/10.1016/j.measurement.2016.05.050.
- Gohari, H., and A. Barari. 2016b. “Using Perona-Malik Anisotropic Heat Diffusion for Data Reduction in Coordinate Metrology.” The Journal of the CMSC 11 (2): 18-26. https://www.cmsc.org/autumn-2016-using-perona-malik-anisotropic-heat-diffusion-for-data-reduction-in-coordinate-metrology
- Hammad Mian, S., and A. Al-Ahmari. 2014. “New Developments in Coordinate Measuring Machines for Manufacturing Industries.” International Journal of Metrology and Quality Engineering 5 (1): 101. doi:https://doi.org/10.1051/ijmqe/2014001.
- Jamiolahmadi, S., and A. Barari. 2014. “Surface Topography of Additive Manufacturing Parts Using a Finite Difference Approach.” Journal of Manufacturing Science and Engineering 136 (6): 061009. doi:https://doi.org/10.1115/1.4028585.
- Jamiolahmadi, S., and A. Barari. 2018. “Study of Detailed Deviation Zone considering Coordinate Metrology Uncertainty.” Measurement: Journal of the International Measurement Confederation 126: 433–457. doi:https://doi.org/10.1016/j.measurement.2016.12.032.
- Lalehpour, A., and A. Barari. 2017. “Developing Skin Model in Coordinate Metrology Using a Finite Element Method.” Measurement 109: 149–159. doi:https://doi.org/10.1016/J.MEASUREMENT.2017.05.056.
- Lalehpour, A., B. Cody, and A. Barari. 2017. “Adaptive Data Reduction with Neighbourhood Search Approach in Coordinate Measurement of Planar Surfaces.” Journal of Manufacturing Systems 45: 28–47. doi:https://doi.org/10.1016/j.jmsy.2017.07.001.
- Lange, C., and K. Polthier. 2005. “Anisotropic Smoothing of Point Sets.” Computer Aided Geometric Design 22 ( 7 SPEC. ISS.): 680–692. doi:https://doi.org/10.1016/j.cagd.2005.06.010.
- Obeidat, S. M., and S. Raman. 2009. “An Intelligent Sampling Method for Inspecting Free-form Surfaces.” The International Journal of Advanced Manufacturing Technology 40 (11–12): 1125–1136. doi:https://doi.org/10.1007/s00170-008-1427-3.
- Perona, P., and J. Malik 1990. “Scale-Space and Edge Detection Using Anisotropic Diffusion.” In IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 12, Issue 7. https://ieeexplore.ieee.org/abstract/document/56205/
- Rajamohan, G., M. S. Shunmugam, and G. L. Samuel. 2011. “Effect of Probe Size and Measurement Strategies on Assessment of Freeform Profile Deviations Using Coordinate Measuring Machine.” Measurement: Journal of the International Measurement Confederation 44 (5): 832–841. doi:https://doi.org/10.1016/j.measurement.2011.01.020.
- Rossi, A., M. Antonetti, M. Barloscio, and M. Lanzetta. 2011. “Fast Genetic Algorithm for Roundness Evaluation by the Minimum Zone Tolerance (MZT) Method.” Measurement: Journal of the International Measurement Confederation 44 (7): 1243–1252. doi:https://doi.org/10.1016/j.measurement.2011.03.031.
- Sładek, J., and A. Gaska. 2012. “Evaluation of Coordinate Measurement Uncertainty with Use of Virtual Machine Model Based on Monte Carlo Method.” Measurement: Journal of the International Measurement Confederation 45 (6): 1564–1575. doi:https://doi.org/10.1016/j.measurement.2012.02.020.
- Tsai, M. J., and C. C. Hung. 2005. “Development of a High-precision Surface Metrology System Using Structured Light Projection.” Measurement: Journal of the International Measurement Confederation 38 (3): 236–247. doi:https://doi.org/10.1016/j.measurement.2005.07.014.
- Vrba, I., R. Palencar, M. Hadzistevic, B. Strbac, V. Spasic-Jokic, and J. Hodolic. 2015. “Different Approaches in Uncertainty Evaluation for Measurement of Complex Surfaces Using Coordinate Measuring Machine.” Measurement Science Review 15 (3): 111–118. doi:https://doi.org/10.1515/msr-2015-0017.
- Zhao, H., J. P. Kruth, N. Van Gestel, B. Boeckmans, and P. Bleys. 2012. “Automated Dimensional Inspection Planning Using the Combination of Laser Scanner and Tactile Probe.” Measurement: Journal of the International Measurement Confederation 45 (5): 1057–1066. doi:https://doi.org/10.1016/j.measurement.2012.01.037.