References
- T. Massalski, J. L. Murray, L. H. Bennett and H. Baker (eds.); Bimary Alloy Phase Diagrams, Vol. 1, American Society for Metals, Metals Park, OH (1986), p. 141.
- R. W. Hertzberg, F. D. Lemkey and J. A. Ford; “Mechanical Behavior of Lamellar (Al-C.uAl2) and Whisker Type (Al-Al3Ni) Unidirectionally-Solidified Eutectic Alloys,” Trans. AIME, 233 (1964), 342.
- B. J. Bayles, J. A. Ford and M. J. Salkind; “The Effect of Elevated-Temperature Exposure on the Microstructure and Tensile Strength of Al3Ni Whisker-Reinforced Aluminum,” Ibid., 239 (1967), 844.
- M. J. Salkind and F. D. George; “The Charpy Impact Behavior of Al3Ni Whisker-Reinforced Aluminum,” Ibid., 242 (1968), 1237.
- F. D. Lemkey, R. W. Hertzberg and J. A. Ford; “The Microstructure, Crystallography, and Mechanical Behavior of Unidirectionally Solidified Al-Al3Ni Eutectic,” Ibid., 233 (1965), 334.
- D. Jaffery and G. A. Chadwick; “The Lamellar to Fibrous Transition” and Orientation Relationships in the Sn-Zn and Al-Al3Ni Eutectic Systems”, Ibid., 245 (1969), 2435.
- Idem.; “The Nucleation, Growth Morphology, and Thermal Stability of Sn-Zn and Al-Al3Ni Eutectic Alloys,” Metall Trans., 1 (1970), 3389.
- E. B. Breinan, E. R. Thompson and W. K. Tice; “Creep Behavior of Al-Al3Ni Eutectic Composites,” Ibid., 3 (1972), 211.
- E. M. Breinan, E. R. Thompson, P. McCarthy and W. J. Herman; “Microstructural Characteristics of the Directionally-Solidified Al-Al3Ni Eutectic and Their Influence on Creep Fracture,” Ibid., 3 (1972), 221.
- W. H. S. Lawson and H. W. Kerr; “Mechanical Behavior of Rapidly Solidified A1-A12CU and Al-Al3Ni Composites,” Ibid., 2 (1971), 2853.
- C. Baromeo and T. H. Courtney; “Partitioning of Stress Between Fiber and Matrix During Tensile Deformation of the Al-Al3Ni Eutectic Composite”, Ibid., 4 (1973), 1821.
- T. S. Lui, L. D. Chen and L. H. Chen; “Effect of Mg and Ni on Dynamic Strain Aging of Al-Mg Casting Alloy,” Science and Engineering of Light Metals, The Proceedings of International conference on Recent Advances in Science and Engineering of Light Metals, Ed. By K. Hirao, H. Oikawa, and K. Ikeda, The Japan Institute of Light Metals press, Tokyo (1991), p. 193.
- N. Nishi, S. Kami and Y. Takahashi; “The Mechanical Properties of Al-Ni-Mg and Al-Mn-Mg Die Casting Alloys,” Dispersion Strengthened Aluminium Alloys, The Proceedings of the Six-Session Symposium, Ed. By Y. W. Kim and W. M. Giffth, The Minerals, Metals and Materials Society Press, Phoenix, Arizona (1988) p. 397.
- K. Stanford; “Advances in Extrusion Technology Benefit Aircraft Industry,” Metallurgia, 6 (1987), 271.
- G. E. Dieter: Mechanical Metallurgy, 3rd. ed., McGraw- Hill, New York, (1986), p. 628.
- J. E. Gruzluski and B. M. Closset; The Treatment of Liquid Aluminum-Silicon Alloys, American Foundrymen's Society Press, Illinois (1990), p. 108.
- K. Miwa, G. Yoshinari and T. Ohashi; “Changes in Eutectic Structure and Apparent Viscosity by Stirring of Solidifying Al-Al3Ni Nearly Eutectic Alloys,” J. Jap. Inst. Metals, 6 (1985), 483.