References
- A. Couture; “Iron in Aluminium Casting Alloys—A literature survey”, AFS Inter. Cast Metals J., 6 (1981), 4, 9–17.
- J. E. Eklund; “On the Effects of Impurities on the Solidification and Mechanical Behaviour of Primary and Secondary Commercial Purity Aluminium and Aluminium Alloys”, PhD thesis, Helsinki University of Technology (1991).
- J. L. Jorstad; “Understanding ‘Sludge’”, Die Casting Engineer (1986, Nov/Dec.
- M. R. Ghomashchi; “Intermetallic Compounds in an Al-Si Alloy used in High Pressure Die-Casting”, Z. Metallkunde, 78 (1987), 11, 784–787.
- R. Dunn; “Aluminium Melting Problems and their Influence on Furnace Selection”, Die Casting Engineer (1965), Sept., 8–16.
- L. F. Mondolfo; “Aluminum Alloys: Structure and Properties”, Butterworths (1976), 759–777, 534–537, 661–662.
- J. Gobrecht; “Segregation par Gravite du Fer, du Manganese et du Chrome dans les Alliages Aluminium-Silicium de Fonderie”, Fonderie (1977), May, 367, 171–173.
- A. L. Dons; “AlFeSi-Particles in Commercial Pure Aluminium”, Z. Metallkunde, 75 (1984), 170–174.
- D. Munson; “Clarification of the Phases Occurring in Aluminium-rich Aluminium-Iron-Silicon Alloys, with Particular Reference to Ternary Phase α-AlFeSi”, J. of the Institute of Metals, 95 (1967), 217–219.
- J. G. Barlock and L. F. Mondolfo; “Structure of some Aluminium-Iron-Magnesium-Manganese-Silicon Alloys”, Z. Metallkunde, 66 (1975), 605–611.
- S. Yaneva, N. Stoichev, Z. Kamenova and S. Budurov; “Quaternary Iron-Containing Phases in Al-Si Cast Alloys”, Z. Metallkunde, 75 (1984), 395–398.
- G. Gustafsson, T. Thorvaldsson and G. L. Dunlop; “The Influence of Fe and Cr on the Microstructure of Cast Al-Si-Mg Alloys”, Met. Trans. A., 17A (1986), 45–52.
- J. N. Pratt and G. V. Raynor, “The Intermetallic Compounds in the Alloys of Aluminium and Silicon with Cr, Mn, Fe, Co, Ni”, J. Institute of Metals, 79 (1951), 211–232.
- G. Phragmen; “On the Phases Occurring in Alloys of Aluminium with Copper, Magnesium, Manganese, Iron, and Silicon”, J. Institute of Metals (1950), 77, 489–533.
- P. Liu, T. Thorvaldsson and G. L. Dunlop; “Formation of Intermetallic Compounds during Solidification of Dilute Al-Fe-Si Alloys”, J. Mat. Science Tech., 2 (1986), Oct., 1009–1018.
- V. Stefaniay, A. Griger and T. Turmezey; “Intermetallic Phases in the Aluminium-side Corner of the AlFeSi-Alloy System”, J. Mater. Science, 22 (1987), 539–546.
- Y. Awano and Y. Shimizu; “Non-equilibrium Crystallization of AlFeSi Compound in Melt-superheated Al-Si Alloy Castings”, AFS Trans., 90 (1990), 889–895.
- D. L. Colwell and R. J. Kissling; “Die and Permanent Mold Casting Aluminum Alloy Minor Elements”, AFS Trans., 69 (1961) 610–616.
- W. H. Glaisher; “Segregation of Iron and Manganese in some Aluminium Casting Alloys”, Metallurgia, 43 (1951), 127–131.
- L. F. Mondolfo; “Manganese in Aluminium Alloys”, The Manganese Centre (1978), Paris, 1–35.
- J. B. Gobrecht; “Schwereseigerungen von Eisen, Mangan und Chrom in Aluminium-Silicium-Gusslegierungen (Teil 1)”, Giesserei, 62 (1975), 263–266.
- J. B. Gobrecht; “Schwereseigerungen von Eisen, Mangan und Chrom in Aluminium-Silicium-Gusslegierungen (Teil 2)”, Giesserei, 63 (1976), 20, 558–561.
- D. A. Granger; “Investigation of a Star-like Intermetallic Phase Occurring in Alloy 339”, AFS Trans., 99 (1991), 379–383.
- W. Bonsack; “Iron-the Problematic Factor in Quality of Aluminum Alloy Die-Castings”, AFS Trans., 69 (1961), 712–720.
- K. Alker; “Einfluß Geringer Zusätze, Insbesondere von Mangan, auf GefÜge und Mechanische Eigenschaften eisenarmer Aluminium-Silizium-Guβlegierungen”, Aluminium, 49 (1973), 417–421.