Modelling process robustness: a case study of centrifugal casting

References

• Abu-Dheir, N., M. Khraisheh, K. Saito, and A. Male. 2005. “Silicon Morphology Modification in the Eutectic Al–Si Alloy Using Mechanical Mold Vibration.” Materials Science and Engineering 393 (1–2): 109–117.10.1016/j.msea.2004.09.038
   Google Scholar
• Al-Refaie, A. 2011. “Optimising Correlated QCHs in Robust Design Using Principal Components Analysis and DEA Techniques.” Production Planning & Control 22 (7): 676–689.
   Web of Science ®Google Scholar
• Al-Aomar, R. A. 2006. “Incorporating Robustness into Genetic Algorithm Search of Stochastic Simulation Outputs.” Simulation Modelling Practice and Theory 14: 201–223.10.1016/j.simpat.2005.05.001
   Web of Science ®Google Scholar
• Beyer, H.-G., and B. Sendhoff. 2007. “Robust Optimization – A Comprehensive Survey.” Computer Methods in Applied Mechanics and Engineering 196: 3190–3218.10.1016/j.cma.2007.03.003
   Web of Science ®Google Scholar
• Borkowski, J. J., and J. M. Lucas. 1997. “Designs of Mixed Resolution for Process Robustness Studies.” Technometrics 39: 63–70.10.1080/00401706.1997.10485440
   Web of Science ®Google Scholar
• Boyles, R. A. 1994. “Process Capability with Asymmetric Tolerances.” Communications in Statistics: Simulation & Computation 23: 615–643.
   Web of Science ®Google Scholar
• Brenneman, W. A., and W. R. Myers. 2003. “Robust Parameter Design with Categorical Noise Variables.” Journal of QualityTechnology 35: 335–341.
   Web of Science ®Google Scholar
• Chan, L. K., S. W. Cheng, and F. A. Spiring. 1991. “A Multivariate Measure of Process Capability.” International Journal of Modelling and Simulation 11: 1–6.
   Google Scholar
• Changyun, L., W. Haiyan, W. Shiping, X. Lei, W. Kuangfei, and F. Hengzhi. 2010. “Research on Mould Filling and Solidification of Titanium Alloy in Vertical Centrifugal Casting.” Rare Metal Materials and Engineering 39: 388–392.10.1016/S1875-5372(10)60085-9
   Web of Science ®Google Scholar
• Chen, J.-M., and J.-C. Tsou. 2003. “An Optimal Design for Process Quality Improvement: Modeling and Application.” Production Planning & Control 14 (7): 603–612.
   Web of Science ®Google Scholar
• Chirita, G., D. Soares, and F. S. Silva. 2008. “Advantages of the Centrifugal Casting Technique for the Production of Structural Components with Al-Si Alloys.” Materials and Design 29: 20–27.10.1016/j.matdes.2006.12.011
   Web of Science ®Google Scholar
• Falamaki, C., and J. Veysizadeh. 2008. “Taguchi Design of Experiments Approach to the Manufacture of One-Step Alumina Microfilter/Membrane Supports by the Centrifugal Casting Technique.” Ceramics International 34: 1653–1659.10.1016/j.ceramint.2007.07.020
   Web of Science ®Google Scholar
• Feinberg, M. 1996. La Validation des méthodes d'analyse : Une approche chimiométrique de l'assurance qualité au laboratoire [Validation of Analytical Methods: A Chemometric Approach to Laboratory Quality Assurance], 38–393. Paris: Masson.
   Google Scholar
• Frey, D. D., K. N. Otto, and J. A., Wysocki. 2000. “Evaluating Process Capability during the Design of Manufacturing Systems.” Journal of Manufacturing Science and Engineering 123: 119–127.
   Web of Science ®Google Scholar
• Fu, P. X., X. H. Kang, Y. C. Ma, K. Liu, D. Z. Li, and Y. Y. Li. 2008. “Centrifugal Casting of TiAl Exhaust Valves.” Intermetallics 16: 130–138.10.1016/j.intermet.2007.08.007
   Web of Science ®Google Scholar
• Gao, J. W., and C. Y. Wang. 2000. “Modeling the Solidification of Functionally Graded Materials by Centrifugal Casting.” Materials Science and Engineering A292: 207–215.10.1016/S0921-5093(00)01014-5
   Google Scholar
• Garetti, M., and M. Taisch. 2012. “Sustainable Manufacturing: Trends and Research Challenges.” Production Planning & Control 23 (2–3): 83–104.
   Web of Science ®Google Scholar
• Genin, P., S. Lamouri, and A. Thomas. 2008. “Multi-Facilities Tactical Planning Robustness with Experimental Design.” Production Planning & Control 19 (2): 171–182.
   Web of Science ®Google Scholar
• Goldfarb, H. B., C. M. Borror, and D. C. Montgomery. 2003. “Mixture-Process Variables Experiments with Noise Variables.” Journal of Quality Technology 35: 393–405.
   Web of Science ®Google Scholar
• Hair, J. F. Jr., Anderson, R. E., Tatham, R. L., and Black, W. C., 2010. Multivariate Data Analysis. 7th ed. New Delhi: Pearson Prentice Hall.
   Google Scholar
• Halvaee, A., and A. Talebi. 2001. “Effect of Process Variables on Microstructure and Segregation in Centrifugal Casting of C92200 Alloy.” Journal of Materials Processing Technology 118: 123–127.
   Web of Science ®Google Scholar
• Huang, Y.-F. 2000. “Determination of the Best Mean in the Taguchi Quality Selection Model.” Production Planning & Control 11 (6): 565–571.
   Web of Science ®Google Scholar
• Huatuco, L. H., T. F. Burgess, and N. E. Shaw. 2010. “Entropic-Related Complexity for Re-Engineering a Robust Supply Chain: A Case Study.” Production Planning & Control 21 (8): 724–735.
   Web of Science ®Google Scholar
• Kane, V. E. 1986. “Process Capability Indices.” Journal of Quality Technology 18: 41–52.
   Web of Science ®Google Scholar
• Karimi, H. R., and S. S. Djokoto. 2012. “Instrumentation and Modeling of High-Pressure Roller Crusher for Silicon Carbide Production.” International J Adv Manuf Technol 62 (9): 1107–1113. doi:10.1007/s00170-011-3871-8.
   Web of Science ®Google Scholar
• Kathiravan, N., S. R. Devadasan, B. Michael, and S. K. Goyal. 2008. “Total Quality Function Deployment in a Rubber Processing Company: A Sample Application Study.” Production Planning & Control 19 (1): 53–66.
   Web of Science ®Google Scholar
• Kaya, İ., and C. Kahraman. 2010. “A New Perspective on Fuzzy Process Capability Indices: Robustness.” Expert Systems with Applications 37: 4593–4600.10.1016/j.eswa.2009.12.049
   Web of Science ®Google Scholar
• Kazmer, D., and C. Roser. 1999. “Evaluation of Product and Process Design Robustness.” Research in Engineering Design 11: 20–30.10.1007/s001630050002
   Web of Science ®Google Scholar
• Koc, M., A. Agcayazi, and J. Carsley. 2011. “An Experimental Study on Robustness and Process Capability of the Warm Hydroforming Process.” Journal of Manufacturing Science and Engineering 133: 1–13.
   Web of Science ®Google Scholar
• Leung, S. C. H., and Y. Wu. 2004. “A Robust Optimization Model for Stochastic Aggregate Production Planning.” Production Planning & Control 15 (5): 502–514.
   Web of Science ®Google Scholar
• Li, J., C. Zhang, R. Liang, and B. Wang. 2008. “Robust Design of Composites Manufacturing Processes with Process Simulation and Optimisation Methods.” International Journal of Production Research 46 (8): 2087–2104.10.1080/00207540600806455
   Web of Science ®Google Scholar
• Lucas, J. M. 1994. “How to Achieve a Robust Process Using Response Surface Methodology.” Journal of Quality Technology 25: 248–260.
   Web of Science ®Google Scholar
• Mesquita, R. A., D. R. Leiva, A. R. Yavari, and W. J. Botta Filho. 2007. “Microstructures and Mechanical Properties of Bulk AlFeNd(Cu,Si) Alloys Obtained through Centrifugal Force Casting.” Materials Science and Engineering a 452–453: 161–169.10.1016/j.msea.2006.10.082
   Web of Science ®Google Scholar
• Mevik, B.-H., E. M. Færgestad, M. R. Ellekjær, and T. Næs. 2001. “Using Raw Material Measurements in Robust Process Optimization.” Chemometrics and Intelligent Laboratory Systems 55: 133–145.10.1016/S0169-7439(01)00100-9
   Web of Science ®Google Scholar
• Mondal, S. C., J. Maiti, and P. K. Ray. 2010. “Development of a Measurement Metric for Manufacturing Process Robustness.” International Journal of Productivity and Quality Management 6 (2): 156–181.10.1504/IJPQM.2010.034404
   Google Scholar
• Mondal, S. C., J. Maiti, and P. K. Ray, 2012. “Modelling Robustness in Manufacturing Processes.” PhD thesis., Indian Institute of Technology Kharagpur, India.
   Google Scholar
• Mondal, S. C., J. Maiti, and P. K. Ray. 2013. “Modelling Robustness in Serial Multistage Manufacturing Processes.” International Journal of Production Research 51 (21): 6359–6377.
   Web of Science ®Google Scholar
• Mondal, S. C., P. K. Ray, and J. Maiti. 2013. “Modelling Robustness for Manufacturing Processes: A Critical Review.” International Journal of Production Research, Taylor & Francis 52 (2): 521–538.
   Web of Science ®Google Scholar
• Montgomery, D. C. 2013. Design and Analysis of Experiments. 8th ed. New Delhi: John Wiley & Sons.
   Google Scholar
• Mouton, S., Y. Ledoux, D. Teissandier, and P. Sebastian, 2011. “Composite Part Design Based on Numerical Simulation of the Manufacturing Process.” International Journal of Advance Manufacturing Technology 55 (5): 421–431.
   Google Scholar
• Myers, R. H., A. I. Khuri, and G. G. Vining. 1992. “Response Surface Alternatives to the Taguchi Robust Parameter Design Approach.” The American Statistician 46: 131–139.
   Web of Science ®Google Scholar
• Myers, R. H., and D. C. Montgomery. 2002. Response Surface Methodology: Process and Product Optimization Using Designed Experiments. New York: John Wiley.
   Google Scholar
• Phadke, S. M. 1989. Quality Engineering Using Robust Design. Englewood cliffs, NJ: Prentice Hall.
   Google Scholar
• Ping, W. S., L. D. Rong, G. J. Jie, L. C. Yun, S. Y. Qing, and F. H. Zhi. 2006. “Numerical Simulation of Microstructure Evolution of Ti-6Al-4V Alloy in Vertical Centrifugal Casting.” Materials Science and Engineering, a 426: 240–249.10.1016/j.msea.2006.04.014
   Web of Science ®Google Scholar
• Piotrowska, I., C. Brandt, H. R. Karimi, and P. Maass. 2009. “Mathematical Model of Micro Turning Process.” The International Journal of Advanced Manufacturing Technology 45: 33–40.10.1007/s00170-009-1932-z
   Web of Science ®Google Scholar
• Rao, P., M. Iwasa, T. Tanaka, and I. Kondoh. 2003. “Centrifugal Casting of Al2O3-15 wt % ZrO2 Ceramic Composites.” Ceramics International 29: 209–212.10.1016/S0272-8842(02)00107-4
   Web of Science ®Google Scholar
• Robinson, T. J., C. M. Borror, and R. H. Myers. 2004. “Robust Parameter Design: A Review.” Quality and Reliability Engineering International 20: 81–101.10.1002/(ISSN)1099-1638
   Web of Science ®Google Scholar
• Ross, P. J. 1996. Taguchi Techniques for Quality Engineering. 2nd ed. New York: McGraw-Hill.
   Google Scholar
• Santa-Eulalia, L. A., D. Aït-Kadi, S. D’Amours, J.-M. Frayret, and S. Lemieux. 2011. “Agent-Based Experimental Investigations of the Robustness of Tactical Planning and Control Policies in a Softwood Lumber Supply Chain.” Production Planning & Control 22 (8): 782–799.10.1080/09537287.2010.543561
   Web of Science ®Google Scholar
• Shahriari, H., N. F. Hubele, and F. P. Lawrence, 1995. “A Multivariate Process Capability Vector.” Proceedings of the 4th Industrial Engineering Research Conference, 304 –309. Institute of Industrial Engineers.
   Google Scholar
• Taam, W., P. Subbaiah, and J. W. Liddy. 1993. “A Note on Multivariate Capability Indices.” Journal of Applied Statistics 20 (3): 339–351.10.1080/02664769300000035
   Google Scholar
• Taguchi, G. 1986. Introduction to Quality Engineering. Tokyo: Asian Productivity Organization distributed by American Supplier Institute.
   Google Scholar
• Taguchi, G. 1987. System of Experimental Design: Engineering Methods to Optimize Quality and Minimize Cost. White Plains, NY: UNIPUB/Kraus International.
   Google Scholar
• Tveit, T.-M. 2005. “Experimental Design Methods and Flowsheet Synthesis of Energy Systems.” Applied Thermal Engineering 25: 283–293.10.1016/j.applthermaleng.2004.05.015
   Web of Science ®Google Scholar
• Wang, F. K., and T. C. T. Du. 2000. “Using Principal Component Analysis in Process Performance for Multivariate Data.” Omega: The International Journal of Management Science 28 (2): 185–194.
   Web of Science ®Google Scholar
• Wei, C.-C., and Y.-C. Lee. 1995. “Determining the Process Tolerances Based on the Manufacturing Process Capability.” The International Journal of Advanced Manufacturing Technology 10: 416–421.10.1007/BF01179406
   Web of Science ®Google Scholar
• Wu, C. F. J., and M. Hamada. 2000. Experiments: Planning, Analysis, and Parameter Design Optimization. New York: John Wiley.
   Google Scholar
• Zeaiter, M., J.-M. Roger, V. Bellon-Maurel, and D. N. Rutledge. 2004. “Robustness of Models Developed by Multivariate Calibration. Part I.” TrAC Trends in Analytical Chemistry 23 (2): 157–170.10.1016/S0165-9936(04)00307-3
   Web of Science ®Google Scholar
• Zhu, Y., J. You, R. Alard, and P. Schonsleben. 2009. “Design Quality: A Key to Improve Quality in International Production Network.” Production Planning & Control 20 (2): 168–177.
   Web of Science ®Google Scholar