References
- Alves, Thais, Iris D. Tommelein, and Glenn Ballard. 2005. “Value Stream Mapping for Make-to-order Products in a Job Shop Environment.” Construction Research Congress 2005: Broadening Perspectives – Proceedings of the Congress, 13–22. http://www.scopus.com/inward/record.url?eid=2-s2.0-27644493989&partnerID=40&md5=30cd98e526dd154f3f259342d9918fd0.
- Atwater, J. Brian, and Satya S. Chakravorty. 2002. “A Study of the Utilization of Capacity Constrained Resources in Drum-Buffer-Rope Systems.” Production and Operations Management 11 (2): 259–273. http://doi.wiley.com/10.1111/j.1937-5956.2002.tb00495.x.
- Baskerville, Richard L., and A. Trevor Wood-Harper. 1996. “A Critical Perspective on Action Research as a Method for Information Systems Research.” Journal of Information Technology 11 (3): 235–246. Accessed January 10, 2017. http://borders.arizona.edu/classes/mis696a/resources/readings/Baskerville-1997-JIT-ACriticalPerspectiveOnActionResearchAsAMethodForISResearch.pdf10.1080/026839696345289
- Bergamaschi, D., R. Cigolini, Marco Perona, and Alberto Portioli. 1997. “Order Review and Release Strategies in a Job Shop Environment: A Review and a Classification.” International Journal of Production Research 35 (2): 399–420. Accessed January 16, 2014. http://www.tandfonline.com/doi/abs/10.1080/00207549719582110.1080/002075497195821
- Bertolini, Massimo, Marcello Braglia, Giovanni Romagnoli, and Francesco Zammori. 2013. “Extending Value Stream Mapping: The Synchro-MRP Case.” International Journal of Production Research 51 (18): 5499–5519. Accessed February 6, 2014. http://www.tandfonline.com/doi/abs/10.1080/00207543.2013.784415
- Bertolini, Massimo, and Giovanni Romagnoli. 2013. “Design and Simulation of Multi-CONWIP into a Make-to-order Firm with General Job Shop Configuration.” CIE43 – 43rd International Conference on Computers and Industrial Engineering, Hong Kong, 149.1–149.15.
- Bertolini, Massimo, Giovanni Romagnoli, and Francesco Zammori. 2016a. “Assessing Performance of Workload Control in High Variety Low Volumes MTO Job Shops: A Simulative Analysis.” Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, Seville, Spain, 362–370.
- Bertolini, Massimo, Giovanni Romagnoli, and Francesco Zammori. 2016b. “Simulation of Two Hybrid Production Planning and Control Systems: A Comparative Analysis.” Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, Seville, Spain, 388–397.
- Bertrand, J. W. M., and H. P. G. Van Ooijen. 2002. “Workload Based Order Release and Productivity: A Missing Link.” Production Planning & Control 13 (7): 665–678. Accessed May 10, 2013. http://www.tandfonline.com/doi/full/10.1080/095372802100002627610.1080/0953728021000026276
- Bonaccorsi, Andrea, Gionata Carmignani, and Francesco Zammori. 2011. “Service Value Stream Management (SVSM): Developing Lean Thinking in the Service Industry.” Journal of Service Science and Management 4 (4): 428–439. Accessed January 16, 2014. http://www.scirp.org/journal/PaperDownload.aspx?DOI=10.4236/jssm.2011.4404810.4236/jssm.2011.44048
- Braglia, Marcello, Gionata Carmignani, and Francesco Zammori. 2006. “A New Value Stream Mapping Approach for Complex Production Systems.” International Journal of Production Research 44 (18–19): 3929–3952. Accessed May 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/0020754060069054510.1080/00207540600690545
- Braglia, Marcello, Marco Frosolini, and Francesco Zammori. 2009. “Uncertainty in Value Stream Mapping Analysis.” International Journal of Logistics Research and Applications 12 (6): 435–453. Accessed January 16, 2014. http://www.tandfonline.com/doi/abs/10.1080/1367556080260155910.1080/13675560802601559
- Cigolini, R., and Alberto Portioli-Staudacher. 2002. “An Experimental Investigation on Workload Limiting Methods with ORR Policies in a Job Shop Environment.” Production Planning & Control 13 (7): 602–613.10.1080/0953728021000026221
- Coughlan, P., and D. Coghlan. 2009. “Action Research.” In Researching Operations Management, edited by C. Karlsson, 236–264. Abingdon: Routledge.
- Esfandyari, Alireza, Mohd Rasid Osman, Napsiah Ismail, and Farzad Tahriri. 2011. “Application of Value Stream Mapping Using Simulation to Decrease Production Lead Time: A Malaysian Manufacturing Case.” International Journal of Industrial and Systems Engineering 8 (2): 230.10.1504/IJISE.2011.041371
- Germs, R., and J. Riezebos. 2010. “Workload Balancing Capability of Pull Systems in MTO Production.” International Journal of Production Research 48 (8): 2345–2360. Accessed March 20, 2013. http://www.tandfonline.com/doi/abs/10.1080/0020754090281431410.1080/00207540902814314
- Goyal, Kapil Kumar, P. K. Jain, and Madhu Jain. 2012. “A Comprehensive Approach to Operation Sequence Similarity Based Part Family Formation in the Reconfigurable Manufacturing System.” International Journal of Production Research 51 (6): 1–15.
- Gurumurthy, Anand, and Rambabu Kodali. 2011. “Design of Lean Manufacturing Systems Using Value Stream Mapping with Simulation: A Case Study.” Journal of Manufacturing Technology Management 22 (4): 444–473.10.1108/17410381111126409
- Haider, A., and J. Mirza. 2015. “An Implementation of Lean Scheduling in a Job Shop Environment.” Advances in Production Engineering & Management 10 (1): 5–17. http://apem-journal.org/Archives/2015/Abstract-APEM10-1_005-017.html.10.14743/apem2015.1.188
- Hendry, Linda, Yuan Huang, and Mark Stevenson. 2013. “Workload Control: Successful Implementation Taking a Contingency-based View of Production Planning & Control.” International Journal of Operations & Production Management 33 (1): 69–103. doi:10.1108/01443571311288057.
- Henrich, Peter, Martin J. Land, Gerard J. C. Gaalman, and Durk-Jouke Van Der Zee. 2004. “Reducing Feedback Requirements of Workload Control.” International Journal of Production Research 42 (24): 5235–5252. Accessed April 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/002075404200027043010.1080/0020754042000270430
- Hopp, W. J. Wallace J., and Mark L. Spearman. 2004. “To Pull or Not to Pull: What is the Question?” Manufacturing & Service Operations Management 6 (2): 133–148. Accessed March 7, 2013. http://msom.journal.informs.org/cgi/doi/10.1287/msom.1030.002810.1287/msom.1030.0028
- Jasti, Naga Vamshi Krishna, and Rambabu Kodali. 2015. “A Critical Review of Lean Supply Chain Management Frameworks: Proposed Framework.” Production Planning & Control 26 (13): 1051–1068.10.1080/09537287.2015.1004563
- Lödding, H., K. W. Yu, and H. P. Wiendahl. 2003. “Decentralized WIP-Oriented Manufacturing Control (DEWIP).” Production Planning & Control 14 (1): 42–54. Accessed March 13, 2013. http://www.tandfonline.com/doi/abs/10.1080/095372802100007870110.1080/0953728021000078701
- Marangoni, Giulio, Giovanni Romagnoli, and Francesco Zammori. 2013. “Multiple Value Stream Mapping: How to Implement Work Load Control in Complex Systems.” Proceedings of 2013 International Conference on Industrial Engineering and Systems Management, IEEE - IESM 2013, Rabat. http://ieeexplore.ieee.org/document/6761377/
- Nash, Mark A., and Sheila R. Poling. 2008. Mapping the Total Value Stream. London: Productivity Press.
- Parthanadee, Parthana, and Jirachai Buddhakulsomsiri. 2012. “Production Efficiency Improvement in Batch Production System Using Value Stream Mapping and Simulation: A Case Study of the Roasted and Ground Coffee Industry.” Production Planning & Control 1–22. Accessed April 26, 2013. http://www.tandfonline.com/doi/abs/10.1080/09537287.2012.702866
- Petroni, Alberto, Francesco Zammori, and Giuliano Marolla. 2017. “World Class Manufacturing in Make-to-order Batch-Production SMEs: An Exploratory Analysis in Northern Italy.” International Journal of Business Excellence 11 (2): 241–275.10.1080/09537287.2015.1004563.
- Romagnoli, Giovanni. 2015. “Design and Simulation of CONWIP in the Complex Flexible Job Shop of a Make-to-order Manufacturing Firm.” International Journal of Industrial Engineering Computations 6 (1): 117–134. doi: 10.5267/j.ijiec.2014.8.003.
- Silva, Cristovao, Mark Stevenson, and Matthias Thurer. 2015. “A Case Study of the Successful Implementation of Workload Control: A Practitioner-led Approach.” Journal of Manufacturing Technology Management 26 (2): 280–296.doi: 10.1108/JMTM-10-2013-0144
- Slomp, Jannes, Jos A. C. Bokhorst, and Remco Germs. 2009. “A Lean Production Control System for High-variety/Low-volume Environments: A Case Study Implementation.” Production Planning & Control 20 (7): 586–595. Accessed March 11, 2013. http://www.tandfonline.com/doi/abs/10.1080/0953728090308616410.1080/09537280903086164
- Soepenberg, G. D., Martin J. Land, and Gerard J. C. Gaalman. 2012. “Adapting Workload Control for Job Shops with High Routing Complexity.” International Journal of Production Economics 140 (2): 681–690. Accessed March 2, 2013. http://linkinghub.elsevier.com/retrieve/pii/S092552731200114410.1016/j.ijpe.2012.03.018
- Stevenson, Mark, Linda C. Hendry, and B. G. Kingsman. 2005. “A Review of Production Planning and Control: The Applicability of Key Concepts to the Make-to-order Industry.” International Journal of Production Research 43 (5): 869–898. Accessed April 30, 2013. http://www.tandfonline.com/doi/abs/10.1080/002075404200029852010.1080/0020754042000298520
- Stevenson, Mark, Yuan Huang, and Linda C. Hendry. 2009. “The Development and Application of an Interactive End-user Training Tool: Part of an Implementation Strategy for Workload Control.” Production Planning & Control 20 (7): 622–635. Accessed April 26, 2013. http://www.tandfonline.com/doi/abs/10.1080/0953728090303431310.1080/09537280903034313
- Stevenson, Mark, Yuan Huang, Linda C. Hendry, and Erik Soepenberg. 2010. “The Theory & Practice of Workload Control: A Research Agenda & Implementation Strategy.” International Journal of Production Economics 131 (2): 689–700. Accessed March 28, 2013. http://eprints.lancs.ac.uk/34617/
- Tham, Y. W., W. Yu, and B. Baliga. 2007. “Applying Lean Techniques to the Value Stream in a Job Shop Environment.” 20th Annual Conference of the American Society for Engineering Management, 129–138.
- Thürer, Matthias, Martin J. Land, and Mark Stevenson. 2014. “Card-based Workload Control for Job Shops: Improving COBACABANA.” International Journal of Production Economics 147 (A): 180–188. Accessed February 6, 2014. http://linkinghub.elsevier.com/retrieve/pii/S092552731300420910.1016/j.ijpe.2013.09.015
- Thürer, Matthias, Mark Stevenson, and Cristovao Silva. 2011. “Three Decades of Workload Control Research: A Systematic Review of the Literature.” International Journal of Production Research 49 (23): 6905–6935. Accessed May 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/00207543.2010.51900010.1080/00207543.2010.519000
- Thürer, Matthias, Mark Stevenson, Cristovao Silva, Martin J. Land, and Lawrence D. Fredendall. 2012. “Workload Control and Order Release: A Lean Solution for Make-to-order Companies.” Production and Operations Management 21 (5): 939–953. Accessed February 6, 2014. http://doi.wiley.com/10.1111/j.1937-5956.2011.01307.x10.1111/poms.2012.21.issue-5
- Wiendhal, Hans-Peter. 1995. Load-oriented Manufacturing Control. Berlin: Springer.10.1007/978-3-642-57743-7
- Womack, James P., and Daniel T. Jones. 2003. Lean Thinking – Banish Waste and Create Wealth in Your Corporation. 2nd ed. London: Free Press.
- Zammori, Francesco, Marcello Braglia, and Davide Castellano. 2016. “Just-in-time Parts Feeding Policies for Paced Assembly Lines: Possible Solutions for Highly Constrained Layouts.” International Transactions in Operational Research 23 (4): 691–724. doi: 10.1111/itor.12173.