Bottleneck identification and ranking model for mine operations

References

• Atwater, J. B., and S. S. Chakravorty. 2009. “A Study of the Utilization of Capacity Constrained Resources in Drum‐Buffer‐Rope Systems.” Production and Operations Management 11 (2): 259–273. doi:10.1111/j.1937-5956.2002.tb00495.x.
   Google Scholar
• Bellgran, M., and K. Safsten. 2010. Production Development Design and Operation of Production Systems. London: Springer.
   Google Scholar
• Biswal, S. 2012. “Simulation Study on Industrial Ball Mill for Iron Ore Processing.” Paper presented at International Mineral Processing Congress (IMPC), New Delhi, India, 2012.
   Google Scholar
• Bloss, M. 2009. “Increasing Throughput at Olympic Dam by Effective Management of the Mine Bottlleneck.” Mining Technology 118 (1): 33–46. doi:10.1179/174328609X457347.
   Google Scholar
• Bodon, P., C. Fricke, T. Sandeman, and C. Stanford. 2011. “Modeling the Mining Supply Chain from Mine to Port: A Combined Optimization and Simulation Approach.” Journal of Mining Science 47 (2): 202–211. doi:10.1134/S1062739147020079.
   Web of Science ®Google Scholar
• Bozarth, C. C., and R. B. Handfield. 2006. Introduction to Operations and Supply Chain Management. Upper Saddle River, NJ: Pearson Prentice Hall.
   Google Scholar
• Cambitsis, A. 2013. “A Framework to Simplify the Management of Throughput and Constraints.” Journal of the South African Institute of Mining and Metallurgy 113 (10): 769–773.
   Web of Science ®Google Scholar
• Chakravorty, S. S., and J. B. Atwater. 2006. “Bottleneck Management: theory and Practice.” Production Planning & Control 17 (5): 441–447. doi:10.1080/09537280600682752.
   Web of Science ®Google Scholar
• Chiang, S., C. Kuo, and S. Meerkov. 1998. “Bottlenecks in Markovian Production Lines Identification and Application.” Paper presented at Proceedings from IEEE; 98: Conference Decision & Control, Tampa, FL.
   Google Scholar
• Chiang, S., C. Kuo and S. Meerkov. 2000. “DT-Bottlenecks in Serial Production Lines: Theory and Application.” IEEE Transactions on Robotics and Automation 16 (5): 567–580. doi:10.1109/70.880806.
   Google Scholar
• de Treville, S., I. Bicer, V. Chavez-Demoulin, V. Hagspiel, N. Schürhoff, C. Tasserit, and S. Wager. 2014. “Valuing Lead Time.” Journal of Operations Management 32 (6): 337–346. doi:10.1016/j.jom.2014.06.002.
   Web of Science ®Google Scholar
• D'Souza, R. 2004. “A Throughput-based Technique for Identifying Production System Bottlenecks.” Thesis., Mississippi State University.
   Google Scholar
• Ernst, A., M. Krishnamoorthy, D. Sier, and L. Marquez. 2008. “Solving Regional Infrastructure Bottlenecks: rail Allocation Policies for a Coal Terminal.” Australasian Journal of Regional Studies 14 (2): 177–193.
   Google Scholar
• Eskandari, H., N. Babolmorad, and N. Farrokhnia. 2013. “Bottleneck Analysis in a Pharmaceutical Production Line Using Simulation Approach.” Paper presented at Proceedings of the 2013 Summer Computer Simulation Conference.
   Google Scholar
• Goldratt, E., and J. Cox. 1984. The Goal. Revised 1st ed. New York, NY: North River Press.
   Google Scholar
• Gurses, A. 1999. “An Activity-Based Costing and Theory of Constraints Model for Product Mix Decisions.” Thesis., Virginia Polytechnic Institute and State University.
   Google Scholar
• Hsiao, Y. C., Y. Lin, and Y. K. Huang. 2010. “Optimal Multi-Stage Logistic and Inventory Policies with Production Bottleneck in a Serial Supply Chain.” International Journal of Production Economics 124 (2): 408–413. doi:10.1016/j.ijpe.2009.12.002.
   Web of Science ®Google Scholar
• Kahraman, M. M. 2015. “Holistic Mine Management by Identification of Real-Time and Historical Production Bottlenecks.” Dissertation: The University of Arizona.
   Google Scholar
• Kahraman, M., and S. Dessureault. 2013. “Holistic Mine Management by Identification of Production Bottlenecks.” Paper presented at International Symposium on the 36th Applications of Computers and Operations Research in the Mineral Industry (APCOM), Fundacao Luiz Englert, Porto Alegre, Brazil.
   Google Scholar
• Karthikeyan, A. 2007. “Detection of Bottlenecs for Multiproducts and Mitigation using Alternative Process Plans.” Thesis., Anna University.
   Google Scholar
• Khan, A. 2011. “An Integrated Optimization Tool with Applications in Mining Using Discrete Rate Stochastic Model.” Dissertation, Dalhouise University.
   Google Scholar
• Khan, A., and C. Ciriello. 2013. “Constraint Model: A Continuous Improvement Tool to Debottleneck Vertically Integrated Mining and Metallurgical Operations.” Presented at Metso Proceedings 2013, Toronto, CA.
   Google Scholar
• Lanke, A., H. Hoseinie, and B. Ghodrati. 2016. “Mine Production Index (MPI)-Extension of OEE for Bottleneck Detection in Mining.” International Journal of Mining Science and Technology 26 (5): 753–760. doi:10.1016/j.ijmst.2016.05.050.
   Web of Science ®Google Scholar
• Law, A., and W. Kelton. 2000. Simulation Modeling and Analysis. 3rd ed. Boston, MA: McGraw Hill.
   Google Scholar
• Li, J., and S. Meerkov. 2009. Production Systems Engineering. New York, NY: Springer.
   Google Scholar
• Li, L., Q. Chang, and J. Ni. 2009. “Data Driven Bottleneck Detection of Manufacturing Systems.” International Journal of Production Research 47 (18): 5019–5036. doi:10.1080/00207540701881860.
   Web of Science ®Google Scholar
• Li, L., Q. Chang, J. Ni, and S. Biller. 2009. “Real Time Production Improvement through Bottleneck Control.” International Journal of Production Research 47 (21): 6145–6158. doi:10.1080/00207540802244240.
   Web of Science ®Google Scholar
• Li, M. 2011. “Modeling Network-Wide Impacts of Traffic Bottleneck Mitigation Strategies under Stochasitic Capacity Conditions.” Dissertation, The University of Utah.
   Google Scholar
• Lima, E., L. Chwif, and M. Periera Barreto. 2008. “Methodology for Selecting the Best Suitable Bottleneck Detection Method.” Paper presented at Proceedings of the 2008 Winter Simulation Conference, Miami, FL.
   Google Scholar
• Lin, L. 2018. “A Systematic-Theoretic Analysis of Data-Driven Throughput Bottleneck Detection of Production Systems.” Journal of Manufacturing Systems 47: 43–52. doi:10.1016/j.jmsy.2018.03.001.
   Web of Science ®Google Scholar
• Madowe, A. 2013. “The Mine Planning Process for an Open-Pit Diamond Mining Operation–A Case Study on Letseng Diamond Mine in Lesotho.” Journal of South African Institute of Mining and Metallurgy 7 (547–54): 113.
   Google Scholar
• Miwa, K., and S. Takakuwa. 2011. “Operations Modeling and Analysis of an Underground Coal Mine.” Paper presented at Proceedings of the 2011 Winter Simulation Conference, Phoenix, AZ.
   Google Scholar
• Mizgier, K., M. Juttner, and S. Wagner. 2013. “Bottleneck Identification in Supply Chain Networks.” International Journal of Production Research 51 (5): 1477–1490. doi:10.1080/00207543.2012.695878.
   Web of Science ®Google Scholar
• Peng, H. J., M. H. Zhou, M. Z. Liu, Y. Zhang, and Y. B. Huang. 2009. “A Dynamic Optimization Model of an Integrated Coal Supply Chain System and Its Application.” Mining Science and Technology 19: 0842–0846.
   Google Scholar
• Petersen, K., M. Khurum, and A. Lefteris. 2014. “Reasons for Bottlenecks in Very Large-Scale System of Systems Development.” Information and Software Technology 56 (10): 1403–1420. doi:10.1016/j.infsof.2014.05.004.
   Web of Science ®Google Scholar
• Phillis, R., and H. Gumede. 2011. “A Case Study on Stoping Shift Buffering at Impala Platinum: A Critical Chain Project Management Perspective.” Journal of the Southern African Institute of Mining and Metallurgy 111: 793–799.
   Google Scholar
• Porter, A. 2010. Operations Management. s.l. Frederiksberg: Ventus Publishing ApS.
   Google Scholar
• Roser, C., M. Nakano, and M. Tanaka. 2002. “Shifting Bottleneck Detection.” Paper presented at Proceedings of the 2002 Winter Simulation Conference, San Diego, CA.
   Google Scholar
• Roser, C., M. Nakano, and M. Tanaka. 2002. “Throughput Sensitivity Analysis using a Single Simulation.” Paper presented at Proceedings of the 2002 Winter Simulation Conference, San Diego, CA.
   Google Scholar
• Sengupta, S., K. Das, and R. VanTil. 2008. “A New Method for Bottleneck Detection.” Paper Presented at Proceedings of the 2008 Winter Simulation Conference, Miami, FL.
   Google Scholar
• Shen, M., and L. Chen. 2010. “Production Bottleneck Shiftiness Study.” Paper presented at 2010 International Conference on System Science, Engineering Design and Manufacturing Informatization, Yichang, China.
   Google Scholar
• Slack, N., S. Chambers, and R. Johnston. 2007. Operations Management. 5th ed. Essex, UK: Prentice Hall.
   Google Scholar
• Tamilselvan, P. 2010. “Bottleneck Shifting in Production Lines Impact of Variability, New Detection Method and Control Strategies.” Thesis, Wichita State University.
   Google Scholar
• Van Heerden, F. 2015. “South Africa Colliery Engineers Association.” Accessed 25 January 2015. http://www.sacea.org.za/.%5Cdocs%5CDetermining%20the%20Capicity%20Constraint%20Resource%20of%20an%20Underground%20Production%20Section.pdf.
   Google Scholar
• Wang, Y., Q. Zhao, and D. Zheng. 2005. “Bottlenecks in Production Networks: An Overview.” Journal of Systems Science and Systems Engineering 14 (3): 347–363. doi:10.1007/s11518-006-0198-3.
   Google Scholar
• Wu, T., and P. O'Grady. 2005. “A Network-Based Approach to Integrated Supply Chain Design.” Production Planning & Control 16 (5): 444–453. doi:10.1080/00207720500148519.
   Web of Science ®Google Scholar
• Yan, H., Y. An, and W. Shi. 2010. “A New Bottleneck Detecthing Approach to Productivity Improvement of Knowledgeable Manufacturing System.” Journal of Intelligent Manufacturing 21 (6): 665–680. doi:10.1007/s10845-009-0244-3.
   Web of Science ®Google Scholar
• Yu, C., and A. Matta. 2016. “A Statistical Framework of Data-Driven Bottleneck Identification in Manufacturing Systems.” International Journal of Production Research 54 (21): 6317–6332. doi:10.1080/00207543.2015.1126681.
   Web of Science ®Google Scholar