A lean construction and BIM interaction model for the construction industry

References

• Abdelhamid, T. S., and J. G. Everett. 2002. “Physical Demands of Construction Work: A Source of Workflow Unreliability.” Proceedings of the 10th Conference of International Group for Lean Construction.
   Google Scholar
• Adam, M., M. Hofbauer, and M. Stehling. 2020. “Effectiveness of a Lean Simulation Training: challenges, Measures and Recommendations.” Production Planning & Control 32 (6): 443–453.
   Web of Science ®Google Scholar
• Ahuja, R., A. Sawhney, and M. Arif. 2017. “Driving Lean and Green Project Outcomes Using BIM: A Qualitative Comparative Analysis.” International Journal of Sustainable Built Environment 6 (1): 69–80. doi:10.1016/j.ijsbe.2016.10.006.
   Google Scholar
• Akinade, O. O., L. O. Oyedele, M. Bilal, S. O. Ajayi, H. A. Owolabi, H. A. Alaka, and S. A. Bello. 2015. “Waste Minimization through Deconstruction: A BIM-Based Deconstructability Assessment Score (BIM-DAS).” Resources, Conservation and Recycling 105: 167–176. doi:10.1016/j.resconrec.2015.10.018.
   Web of Science ®Google Scholar
• Al Hattab, M., and F. Hamzeh. 2015. “Using Social Network Theory and Simulation to Compare Traditional versus BIM–Lean Practice for Design Error Management.” Automation in Construction 52: 59–69. doi:10.1016/j.autcon.2015.02.014.
   Web of Science ®Google Scholar
• Al Hattab, M., and F. Hamzeh. 2018. “Simulating the Dynamics of Social Agents and Information Flows in BIM-Based Design.” Automation in Construction 92: 1–22. doi:10.1016/j.autcon.2018.03.024.
   Web of Science ®Google Scholar
• Alarcón, L. F., H. Mesa, and G. Howell. 2013. “Characterization of Lean Project Delivery.” Proc. 21st Ann. Conf. of the Int’l Group for Lean Construction.
   Google Scholar
• Alarcón, L., R. Mandujano, G. Maria, and C. Mourgues. 2013. “Analysis of the Implementation of VDC from a Lean Perspective: Literature Review.” In 21th Annual Conference of the International Group for Lean Construction, edited by C. T. Formoso and P. Tzortzopoulos, 781–790. Fortaleza.
   Google Scholar
• Alshawi, M., and B. Ingirige. 2003. “Web-Enabled Project Management: An Emerging Paradigm in Construction.” Automation in Construction 12 (4): 349–364. doi:10.1016/S0926-5805(03)00003-7.
   Web of Science ®Google Scholar
• Andi, Minato. T. 2004. “Representing Causal Mechanism of Defective Designs: exploration through Case Studies.” Construction Management and Economics 22 (2): 183–192.
   Google Scholar
• Andújar-Montoya, M. D., V. Gilart-Iglesias, A. Montoyo, and D. Marcos-Jorquera. 2015. “A Construction Management Framework for Mass Customisation in Traditional Construction.” Sustainability 7 (5): 5182–5210. doi:10.3390/su7055182.
   Web of Science ®Google Scholar
• Andújar-Montoya, M. D., A. Galiano-Garrigós, C. Rizo-Maestre, and V. Echarri-Iribarren. 2019. “BIM and Lean Construction Interactions: A State-of-the-Art Review.” WIT Transactions on the Built Environment 192: 1–13. doi:10.2495/BIM190011.
   Google Scholar
• Andújar-Montoya, M. D., A. Galiano-Garrigós, V. Echarri-Iribarren, and C. Rizo-Maestre. 2020. “BIM-LEAN as a Methodology to save Execution Costs in Building Construction—An Experience under the Spanish Framework.” Applied Sciences 10 (6): 1913. doi:10.3390/app10061913.
   Google Scholar
• Ansah, R. H., S. Sorooshian, S. B. Mustafa, and G. Duvvuru. 2016. “Lean Construction Tools.” Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, MI, USA.
   Google Scholar
• Aouad, G., and Y. Arayici. 2009. Requirements Engineering for Computer Integrated Environments in Construction. Oxford, UK: John Wiley & Sons.
   Google Scholar
• Arayici, Y., and P. Coates. 2012. “A System Engineering Perspective to Knowledge Transfer: A Case Study Approach of BIM Adoption.” Virtual Reality–Human Computer Interaction 2006: 179–206.
   Google Scholar
• Arayici, Y., P. Coates, L. Koskela, M. Kagioglou, C. Usher, and K. O’Reilly. 2011. “Technology Adoption in the BIM Implementation for Lean Architectural Practice.” Automation in Construction 20 (2): 189–195. doi:10.1016/j.autcon.2010.09.016.
   Web of Science ®Google Scholar
• Ashford, J. L. 2002. The Management of Quality in Construction. Routledge.
   Google Scholar
• Aslam, M., Z. Gao, and G. Smith. 2020. “Framework for Selection of Lean Construction Tools Based on Lean Objectives and Functionalities.” International Journal of Construction Management : 1–12. doi:10.1080/15623599.2020.1729933.
   Web of Science ®Google Scholar
• Azhar, S., A. Nadeem, J. Y. Mok, and B. H. Leung. 2008. “Building Information Modeling (BIM): a New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects.” Proc. First International Conference on Construction in Developing Countries, Vol. 1, 435–446.
   Google Scholar
• Azhar, S. 2011. “Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry.” Leadership and Management in Engineering 11 (3): 241–252. doi:10.1061/(ASCE)LM.1943-5630.0000127.
   Google Scholar
• Azhar, S., M. Khalfan, and T. Maqsood. 2015. “Building Information Modelling (BIM): Now and Beyond.” Construction Economics and Building 12 (4): 15–28. doi:10.5130/AJCEB.v12i4.3032.
   Google Scholar
• Aziz, R. F., and S. M. Hafez. 2013. “Applying Lean Thinking in Construction and Performance Improvement.” Alexandria Engineering Journal 52 (4): 679–695. doi:10.1016/j.aej.2013.04.008.
   Google Scholar
• Babalola, O., E. O. Ibem, I. C. Ezema, and A. O. Olanipekun. 2019. “Assessment of the role of lean construction practices in environmental sustainability.” In Journal of Physics: Conference Series 1299(1): 012002. IOP Publishing. doi:10.1088/1742-6596/1299/1/012002.
   Google Scholar
• Bademosi, F., and R. R. Issa. 2021. “Factors Influencing Adoption and Integration of Construction Robotics and Automation Technology in the US.” Journal of Construction Engineering and Management 147 (8): 04021075. doi:10.1061/(ASCE)CO.1943-7862.0002103.
   Web of Science ®Google Scholar
• Ballard, G. 2000b. “Positive vs Negative Iteration in Design.” Proceedings Eighth Annual Conference of the International Group for Lean Construction, IGLC-6, Brighton, UK, 17–19.
   Google Scholar
• Ballard, G., and G. Howell. 2003. “An Update on Last Planner.” Proc. 11th Annual Conf. International Group for Lean Construction, Blacksburg, VA.
   Google Scholar
• Ballard, G., and P. Reiser. 2004. “The St. Olaf College Fieldhouse Project: A Case Study in Designing to Target Cost.” 12th Annual Conference of the International Group for Lean Construction, 234–249.
   Google Scholar
• Ballard, G., and I. Tommelein. 2016. “Current Process Benchmark for the Last Planner System.” Lean Construction Journal 89: 57–89.
   Google Scholar
• Ballard, G., and T. Zabelle. 2000. “Lean Design: Process, Tools, and Techniques.” White Paper 10: 1–15.
   Google Scholar
• Ballard, H. G. 2000a. “The Last Planner System of Production Control.” (Doctoral diss., University of Birmingham).
   Google Scholar
• Ballard, H. G., and P. H. Morris. 2010. “Maximizing Owner Value through Target Value Design.” AACE International Transactions 1 (1): 1–16. Retrieved from http://connection.ebscohost.com/c/articles/52475948/maximizing-owner-value-through-target-value-design
   Google Scholar
• Bartolini, M., E. Bottani, and E. H. Grosse. 2019. “Green warehousing: Systematic literature review and bibliometric analysis.” Journal of Cleaner Production 226: 242–258. doi:10.1016/j.jclepro.2019.04.055.
   Google Scholar
• Barista, D. 2007. “BIM for Healthcare: Early adopters of building information modeling technology are seeing great benefits when designing and building hospitals.” Accessed 15 May 2020 from Building Design + Construction http://www.bdcnetwork.com/article/CA6417654.htm
   Google Scholar
• Bashir, A. M., S. Suresh, D. A. Oloke, D. G. Proverbs, and R. Gameson. 2015. “Overcoming the Challenges Facing Lean Construction Practice in the UK Contracting Organizations.” International Journal of Architecture, Engineering and Construction 4 (1): 10–18. doi:10.7492/IJAEC.2015.002.
   Google Scholar
• Belton, V., and T. J. Stewart. 2002. “Outranking Methods.” In: Multiple Criteria Decision Analysis, 233–259. Boston, MA: Springer.
   Google Scholar
• Berlak, J., S. Hafner, and V. G. Kuppelwieser. 2020. “Digitalization’s Impacts on Productivity: A Model-Based Approach and Evaluation in Germany’s Building Construction Industry.” Production Planning & Control 32 (4): 335–345.
   Web of Science ®Google Scholar
• Bertelsen, S. 2004. “Lean Construction: Where Are we and How to Proceed.” Lean Construction Journal 1 (1): 46–69.
   Google Scholar
• Boakye-Adjei, K., R. Thamma, and E. D. Kirby. 2014. “Autonomation: The Future of Manufacturing.” Proceedings of the 2014 IAJC-ISAM International Conference, Orlando, FL, 978–1.
   Google Scholar
• Boje, D. M., and J. K. Murnighan. 1982. “Group Confidence Pressures in Iterative Decisions.” Management Science 28 (10): 1187–1196. doi:10.1287/mnsc.28.10.1187.
   Web of Science ®Google Scholar
• Boothroyd, G. 1994. “Product Design for Manufacture and Assembly.” Computer-Aided Design 26 (7): 505–520. doi:10.1016/0010-4485(94)90082-5.
   Web of Science ®Google Scholar
• Bortolini, R., C. T. Formoso, and D. D. Viana. 2019. “Site Logistics Planning and Control for Engineer-to-Order Prefabricated Building Systems Using BIM 4D Modeling.” Automation in Construction 98: 248–264. doi:10.1016/j.autcon.2018.11.031.
   Web of Science ®Google Scholar
• Braglia, M., P. Dallasega, and L. Marrazzini. 2020. “Overall Construction Productivity: A New Lean Metric to Identify Construction Losses and Analyse Their Causes in Engineer-to-Order Construction Supply Chains.” Production Planning & Control 1–18.
   Web of Science ®Google Scholar
• Bråthen, K. 2015. “Collaboration with BIM-Learning from the Front Runners in the Norwegian Industry.” Procedia Economics and Finance 21: 439–445. doi:10.1016/S2212-5671(15)00197-5.
   Google Scholar
• Bråthen, K., and A. Moum. 2016. “Bridging the Gap: bringing BIM to Construction Workers.” Engineering, Construction and Architectural Management 23 (6): 751–764. doi:10.1108/ECAM-01-2016-0008.
   Web of Science ®Google Scholar
• Bu-Qammaz, A. S., I. Dikmen, and M.T. Birgonul. 2009. “Risk assessment of international construction projects using the analytic network process.” Canadian Journal of Civil Engineering 36 (7): 1170–1181. doi: 10.1139/L09-061.
   Google Scholar
• Bygballe, L. E., M. Endresen, and S. Fålun. 2018. “The Role of Formal and Informal Mechanisms in Implementing Lean Principles in Construction Projects.” Engineering, Construction and Architectural Management 25 (10): 1322–1338. doi:10.1108/ECAM-07-2017-0138.
   Web of Science ®Google Scholar
• Calderon-Hernandez, C., and X. Brioso. 2018. “Lean, BIM and Augmented Reality Applied in the Design and Construction Phase: A Literature Review.” International Journal of Innovation, Management and Technology 9 (1): 60–63.
   Google Scholar
• Castillo, G., L. F. Alarcón, and V. A. González. 2015. “Implementing Lean Production in Copper Mining Development Projects: Case Study.” Journal of Construction Engineering and Management 141 (1): 05014013. doi:10.1061/(ASCE)CO.1943-7862.0000917.
   Web of Science ®Google Scholar
• Chan, A. P., E. H. Yung, P. T. Lam, C. M. Tam, and S. Cheung. 2001. “Application of Delphi Method in Selection of Procurement Systems for Construction Projects.” Construction Management and Economics 19 (7): 699–718. doi:10.1080/01446190110066128.
   Google Scholar
• Chandrasekaran, B., and M. Goldman. 2007. “Exploring Robustness of Plans for Simulation- Based Course of Action Planning: A Framework and an Example.” Proceedings of the IEEE Symposium on Computational Intelligence in Multicriteria Decision Making, 185–192.
   Google Scholar
• Chemweno, P., L. Pintelon, A. Van Horenbeek, and P. Muchiri. 2015. “Development of a Risk Assessment Selection Methodology for Asset Maintenance Decision Making: An Analytic Network Process (ANP) Approach.” International Journal of Production Economics 170: 663–676. doi:10.1016/j.ijpe.2015.03.017.
   Web of Science ®Google Scholar
• Cheng, J. C., J. Won, and M. Das. 2015. “Construction and Demolition Waste Management Using BIM Technology.” 23rd Annual Conference of the International Group for Lean Construction, Perth, Australia, 381–390.
   Google Scholar
• Cheng, E. W., and H. Li. 2005. “Analytic network process applied to project selection.” Journal of Construction Engineering and Management 131 (4): 459–466. doi:10.1061/(ASCE)07339364(2005)131:4(459).
   Google Scholar
• Cil, I., and Y. S. Turkan. 2013. “An ANP-Based Assessment Model for Lean Enterprise Transformation.” The International Journal of Advanced Manufacturing Technology 64 (5–8): 1113–1130. doi:10.1007/s00170-012-4047-x.
   Web of Science ®Google Scholar
• Cinelli, M., S. R. Coles, and K. Kirwan. 2014. “Analysis of the Potentials of Multi Criteria Decision Analysis Methods to Conduct Sustainability Assessment.” Ecological Indicators 46: 138–148. doi:10.1016/j.ecolind.2014.06.011.
   Web of Science ®Google Scholar
• Ciribini, A. L. C., S. M. Ventura, and M. Paneroni. 2016. “Implementation of an Interoperable Process to Optimise Design and Construction Phases of a Residential Building: A BIM Pilot Project.” Automation in Construction 71: 62–73. doi:10.1016/j.autcon.2016.03.005.
   Web of Science ®Google Scholar
• Cooper, R. 1997. Target Costing and Value Engineering. Routledge.
   Google Scholar
• Cooper, R. G. 2003. “Profitable Product Innovation: The Critical Success Factors.” In International Handbook on Innovation, 139–157. Oxford: Elsevier.
   Google Scholar
• Coates, P., Y. Arayici, L. Koskela, and C. Usher. 2010. “The Changing Perception in the Artefacts used in the Design Practice through BIM Adoption.” CIB 2010 World Congress Proceedings, University of Salford, UK, 1037.
   Google Scholar
• Dallasega, P., A. Revolti, P. C. Sauer, F. Schulze, and E. Rauch. 2020. “BIM, Augmented and Virtual Reality Empowering Lean Construction Management: A Project Simulation Game.” Procedia Manufacturing 45: 49–54. doi:10.1016/j.promfg.2020.04.059.
   Google Scholar
• Dalkey, N., B. Brown, and S. Cochran. 1970. “Use of Self-Ratings to Improve Group Estimates: Experimental Evaluation of Delphi Procedures.” Technological Forecasting 1 (3): 283–291. doi:10.1016/0099-3964(70)90029-3.
   Web of Science ®Google Scholar
• Danforth, E. M., J. E. Weidman, and C. B. Farnsworth. 2017. “Strategies Employed and Lessons Learned by Commercial Construction Companies during Economic Recession and Recovery.” Journal of Construction Engineering and Management 143 (7): 04017027. doi:10.1061/(ASCE)CO.1943-7862.0001310.
   Web of Science ®Google Scholar
• Dave, B., S. Boddy, and L. Koskela. 2011. “VisiLean: Designing a Production Management System with Lean and BIM.” 19th Annual Conference of the International Group for Lean Construction, 477–487. International Group for Lean Construction (IGLC).
   Google Scholar
• Dave, B., L. Koskela, A. Kiviniemi, R. L. Owen, and P. Tzortzopoulis Fazenda. 2013. Implementing Lean in construction: Lean construction and BIM-CIRIA Guide C725.
   Google Scholar
• Dave, B., S. Kubler, K. Främling, and L. Koskela. 2014. Addressing Information Flow in Lean Production Management and Control in Construction. International Group for Lean Construction.
   Google Scholar
• Dave, B., S. Kubler, K. Främling, and L. Koskela. 2016. “Opportunities for Enhanced Lean Construction Management Using Internet of Things Standards.” Automation in Construction 61: 86–97. doi:10.1016/j.autcon.2015.10.009.
   Web of Science ®Google Scholar
• Demirkesen, S., and H. G. Bayhan. 2020. “A Lean Implementation Success Model for the Construction Industry.” Engineering Management Journal 32 (3): 219–239.
   Web of Science ®Google Scholar
• Demirkesen, S., and A. Tezel. 2021. “Investigating Major Challenges for Industry 4.0 Adoption among U.S.” Engineering, Construction and Architectural Management. doi:10.1108/ECAM-12-2020-1059.
   Web of Science ®Google Scholar
• Deniz, G. O. 2017. An analytic network process (ANP) model to examine LEED-certified buildings’ operational performance. Built Environment Project and Asset Management.
   Google Scholar
• Dikmen, I., M. T. Birgonul, B. Ozorhon, and N. Egilmezer-Sapci. 2010. “Using analytic network process to assess business failure risks of construction firms.” Engineering Construction and Architectectural Managegement 17(4): 369–386. doi:10.1108/09699981011056574.
   Google Scholar
• Dong, N. T., A. Khanzode, and H. Lindberg. 2013. “Applying Lean Principles, BIM, and Quality Control to a Construction Supply Chain Management System.” Proceedings of the 30th CIB W78 International Conference, 535–544.
   Google Scholar
• Doumbouya, L., G. Gao, and C. Guan. 2016. “Adoption of the Building Information Modeling (BIM) for Construction Project Effectiveness: The Review of BIM Benefits.” American Journal of Civil Engineering and Architecture 4 (3): 74–79.
   Google Scholar
• Eastman, C. M. 1975. “The Use of Computers instead of Drawings in Building Design.” AIA Journal 63 (3): 46–50.
   Google Scholar
• Eastman, C. M., C. Eastman, P. Teicholz, R. Sacks, and K. Liston. 2011. BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors. John Wiley & Sons.
   Google Scholar
• El-Adaway, I. H., G. G. Ali, I. S. Abotaleb, and H. M. Barber. Jr, 2020. “Studying the Relationship between Stock Prices of Publicly Traded US Construction Companies and Gross Domestic Product: Preliminary Step toward Construction–Economy Nexus.” Journal of Construction Engineering and Management 146 (1): 04019087. doi:10.1061/(ASCE)CO.1943-7862.0001742.
   Web of Science ®Google Scholar
• Emiliani, M. L., and D. J. Stec. 2005. “Leaders Lost in Transformation.” Leadership & Organization Development Journal 26 (5): 370–387.
   Google Scholar
• Enache-Pommer, E.,. M. J. Horman, J. I. Messner, and D. Riley. 2010. “A Unified Process Approach to Healthcare Project Delivery: Synergies between Greening Strategies, Lean Principles, and BIM.” Construction Research Congress 2010: Innovation for Reshaping Construction Practice, 1376–1405. doi:10.1061/41109(373)138.
   Google Scholar
• Enshassi, A., N. Saleh, and S. Mohamed. 2019. “Application Level of Lean Construction Techniques in Reducing Accidents in Construction Projects.” Journal of Financial Management of Property and Construction 24 (3): 274–293. doi:10.1108/JFMPC-08-2018-0047.
   Web of Science ®Google Scholar
• Erdem, D., and B. Ozorhon. 2015. “Assessing Real Estate Project Success Using an Analytic Network Process.” Journal of Management in Engineering 31 (4): 04014065. doi:10.1061/(ASCE)ME.1943-5479.0000281.
   Web of Science ®Google Scholar
• Evans, M., P. Farrell, A. Mashali, and W. Zewein. 2020. “Critical Success Factors for Adopting Building Information Modelling (BIM) and Lean Construction Practices on Construction Mega-Projects: A Delphi Survey.” Journal of Engineering, Design and Technology. 19: 537–556.
   Web of Science ®Google Scholar
• Fatt, C. T. 2005. An IT Roadmap for Singapore’s Construction Industry. Oslo: IAI Industry Day.
   Google Scholar
• Fernandez-Solis, J. L., V. Porwal, S. Lavy, A. Shafaat, Z. K. Rybkowski, K. Son, and N. Lagoo. 2013. “Survey of Motivations, Benefits, and Implementation Challenges of Last Planner System Users.” Journal of Construction Engineering and Management 139 (4): 354–360. doi:10.1061/(ASCE)CO.1943-7862.0000606.
   Web of Science ®Google Scholar
• Gao, S., and S. P. Low. 2014. Lean Construction Management, Vol. 10, 978–981. Singapore: Springer.
   Google Scholar
• Gerber, D. J., B. Becerik-Gerber, and A. Kunz. 2010. “Building Information Modeling and Lean Construction: Technology, Methodology and Advances from Practice.” Proc. 18th Int’l Group for Lean Const.
   Google Scholar
• Gerges, M., S. Austin, M. Mayouf, O. Ahiakwo, M. Jaeger, A. Saad, and T. El Gohary. 2017. “An Investigation into the Implementation of Building Information Modeling in the Middle East.” Journal of Information Technology in Construction 22: 1–15.
   Web of Science ®Google Scholar
• Garuti, C., and M. Sandoval, M. 2005. “Comparing AHP and ANP shiftwork models: Hierarchy simplicity v/s network connectivity.” In Proceedings of the 8th international Symposium of the AHP, Hawaii, USA.
   Google Scholar
• Gbadamosi, A. Q., A. M. Mahamadu, P. Manu, O. Akinade, F. Sierra, T. T. Lam, and A. Alzaatreh. 2018. A BIM based approach for optimization of construction and assembly through material selection.
   Google Scholar
• Ghosh, S., S. Bhattacharjee, P. Pishdad-Bozorgi, and R. Ganapathy. 2014. “A Case Study to Examine Environmental Benefits of Lean Construction.” Proceedings of the 22nd Conference of the International Group of Lean Construction (IGLC), 133–144.
   Google Scholar
• Giel, B., and R. Issa. 2011. “BIM Return on Investment: A Case Study.” Journal of Building Information Modeling 1: 24–27.
   Google Scholar
• Gilligan, B., and J. Kunz. 2007. VDC use in 2007: significant value, dramatic growth, and apparent business opportunity. TR171, 36.
   Google Scholar
• Goyal, M., and Z. Gao. 2011. Integration of Building Information Modeling (BIM) and Prefabrication for Lean Construction. Leadership and Management in Engineering.
   Google Scholar
• Grieves, M. 2019. “Virtually Intelligent Product Systems: Digital and Physical Twins.” Complex Systems Engineering: Theory and Practice 256: 175–200.
   Google Scholar
• Gu, W., K. Foster, J. Shang, and L. Wei. 2019. “A Game-Predicting Expert System Using Big Data and Machine Learning.” Expert Systems with Applications 130: 293–305. doi:10.1016/j.eswa.2019.04.025.
   Web of Science ®Google Scholar
• Gurevich, U., and R. Sacks. 2014. “Examination of the Effects of a KanBIM Production Control System on Subcontractors’ Task Selections in Interior Works.” Automation in Construction 37: 81–87. doi:10.1016/j.autcon.2013.10.003.
   Web of Science ®Google Scholar
• Haarr, K. J., and F. Drevland. 2016. “A Mandated Lean Construction Delivery System in a Rehab Project–A Case Study.” 24th Annual Conference of the International Group for Lean Construction.
   Google Scholar
• Hall, D. M., J. K. Whyte, and J. Lessing. 2020. “Mirror-Breaking Strategies to Enable Digital Manufacturing in Silicon Valley Construction Firms: A Comparative Case Study.” Construction Management and Economics 38 (4): 322–339. doi:10.1080/01446193.2019.1656814.
   Web of Science ®Google Scholar
• Hallowell, M. R., and M. E. Calhoun. 2011. “Interrelationships among Highly Effective Construction Injury Prevention Strategies.” Journal of Construction Engineering and Management 137 (11): 985–993. doi:10.1061/(ASCE)CO.1943-7862.0000354.
   Web of Science ®Google Scholar
• Hallowell, M. R., and J. A. Gambatese. 2010. “Qualitative Research: Application of the Delphi Method to CEM Research.” Journal of Construction Engineering and Management 136 (1): 99–107. doi:10.1061/(ASCE)CO.1943-7862.0000137.
   Web of Science ®Google Scholar
• Hallowell, M., B. Esmaeili, and P. Chinowsky. 2011. “Safety Risk Interactions among Highway Construction Work Tasks.” Construction Management and Economics 29 (4): 417–429. doi:10.1080/01446193.2011.552512.
   Google Scholar
• Hamdan, S. B., B. Barkokebas, J. D. Manrique, and M. Al-Hussein. 2015. “A BIM-Based Simulation Model for Inventory Management in Panelized Construction.” ISARC. Proceedings of the International Symposium on Automation and Robotics in Construction, Vol. 32, 1. IAARC Publications.
   Google Scholar
• Hamdi, O., and F. Leite. 2012. “BIM and Lean Interactions from the Bim Capability Maturity Model Perspective: A Case Study.” IGLC 2012-20th Conference of the International Group for Lean Construction. The International Group for Lean Construction.
   Google Scholar
• Hao, J. 2012. “Application of Lean Construction to Chinese Construction Industry Based on BIM Technology.” 2012 Second International Conference on Business Computing and Global Informatization, 47–50. IEEE.
   Google Scholar
• Heigermoser, D., B. G. de Soto, E. L. S. Abbott, and D. K. H. Chua. 2019. “BIM-Based Last Planner System Tool for Improving Construction Project Management.” Automation in Construction 104: 246–254. doi:10.1016/j.autcon.2019.03.019.
   Web of Science ®Google Scholar
• Hijazi, W., S. Alkass, and T. Zayed. 2009. “Constructability Assessment Using BIM/4D CAD Simulation Model.” AACE International Transactions 4: 1–14.
   Google Scholar
• Hon, C. K., A. P. Chan, and M. C. Yam. 2012. “Empirical Study to Investigate the Difficulties of Implementing Safety Practices in the Repair and Maintenance Sector in Hong Kong.” Journal of Construction Engineering and Management 138 (7): 877–884. doi:10.1061/(ASCE)CO.1943-7862.0000497.
   Web of Science ®Google Scholar
• Howell, G. A. 1999. “What is Lean Construction-1999.” Proceedings IGLC, Vol. 7, 1.
   Google Scholar
• Huang, C. C., and A. Kusiak. 1998. “Manufacturing Control with a Push-Pull Approach.” International Journal of Production Research 36 (1): 251–276. doi:10.1080/002075498194038.
   Web of Science ®Google Scholar
• Ikonen, J., A. Knutas, H. Hämäläinen, M. Ihonen, J. Porras, and T. Kallonen. 2013. “Use of Embedded RFID Tags in Concrete Element Supply Chains.” Journal of Information Technology in Construction 18 (7): 119–147.
   Google Scholar
• Irizarry, J., E. P. Karan, and F. Jalaei. 2013. “Integrating BIM and GIS to Improve the Visual Monitoring of Construction Supply Chain Management.” Automation in Construction 31: 241–254. doi:10.1016/j.autcon.2012.12.005.
   Web of Science ®Google Scholar
• Jaillon, L., and C. S. Poon. 2010. “Design Issues of Using Prefabrication in Hong Kong Building Construction.” Construction Management and Economics 28 (10): 1025–1042. doi:10.1080/01446193.2010.498481.
   Google Scholar
• Jernigan, F. E. 2008. Big BIM, Little Bim: The Practical Approach to Building Information Modeling: Integrated Practice Done the Right Way! 4site Press.
   Google Scholar
• Jung, W., G. Ballard, Y. W. Kim, and S. H. Han. 2012. “Understanding of Target Value Design for Integrated Project Delivery with the Context of Game Theory.” Construction Research Congress 2012: Construction Challenges in a Flat World, 556–563. doi:10.1061/9780784412329.056.
   Google Scholar
• Kam, C., M. Fischer, R. Hänninen, A. Karjalainen, and J. Laitinen. 2003. “The Product Model and Fourth Dimension Project.” Journal of Information Technology in Construction 8 (12): 137–166.
   Google Scholar
• Ke, Y., S. Wang, A. P. C. Chan, and E. Cheung. 2011. “Understanding the Risks in China’s PPP Projects: Ranking of Their Probability and Consequence.” Engineering, Construction and Architectural Management 18 (5): 481–496. doi:10.1108/09699981111165176.
   Google Scholar
• Khanzode, A. 2010. An Integrated, Virtual Design and Construction and Lean (IVL) Method for Coordination of MEP. Unpublished Technical Report 187.
   Google Scholar
• Khanzode, A., M. Fischer, D. Reed, and G. Ballard. 2006. A Guide to Applying the Principles of Virtual Design & Construction (VDC) to the Lean Project Delivery Process. Palo Alto, CA: CIFE, Stanford University.
   Google Scholar
• Khezrimotlagh, D., J. Zhu, W. D. Cook, and M. Toloo. 2019. “Data Envelopment Analysis and Big Data.” European Journal of Operational Research 274 (3): 1047–1054. doi:10.1016/j.ejor.2018.10.044.
   Web of Science ®Google Scholar
• Kim, S. C., Y. W. Kim, K. S. Park, and C. Y. Yoo. 2015. “Impact of Measuring Operational-Level Planning Reliability on Management-Level Project Performance.” Journal of Management in Engineering 31 (5): 05014021. doi:10.1061/(ASCE)ME.1943-5479.0000326.
   Web of Science ®Google Scholar
• Ko, C. H. 2010. “An Integrated Framework for Reducing Precast Fabrication Inventory.” Journal of Civil Engineering and Management 16 (3): 418–427. doi:10.3846/jcem.2010.48.
   Web of Science ®Google Scholar
• Ko, C. H., and N. F. Chung. 2014. “Lean Design Process.” Journal of Construction Engineering and Management 140 (6): 04014011. doi:10.1061/(ASCE)CO.1943-7862.0000824.
   Web of Science ®Google Scholar
• Komonen, K. 2002. “A Cost Model of Industrial Maintenance for Profitability Analysis and Benchmarking.” International Journal of Production Economics 79 (1): 15–31. doi:10.1016/S0925-5273(00)00187-0.
   Web of Science ®Google Scholar
• Koseoglu, O., M. Sakin, and Y. Arayici. 2018. Exploring the BIM and Lean Synergies in the Istanbul Grand Airport Construction Project. Engineering, Construction and Architectural Management.
   Google Scholar
• Koseoglu, O., and E. T. Nurtan-Gunes. 2018. “Mobile BIM Implementation and Lean Interaction on Construction Site: A Case Study of a Complex Airport Project.” Engineering, Construction and Architectural Management 25 (10): 1298–1321. doi:10.1108/ECAM-08-2017-0188.
   Web of Science ®Google Scholar
• Koskela, L. 1997. “Lean Production in Construction.” Lean Construction 1–9.
   Google Scholar
• Koskela, L. 2000. An Exploration towards a Production Theory and Its Application to Construction. VTT Technical Research Centre of Finland.
   Google Scholar
• Koskela, L., G. Howell, G. Ballard, and I. Tommelein. 2002. “The Foundations of Lean Construction.” Design and Construction: Building in Value, edited by R. Best and G. de Valence. Routledge.
   Google Scholar
• Koskela, L., R. Vrijhoef, and R. Dana Broft. 2020. “Construction Supply Chain Management through a Lean Lens.” In Successful Construction Supply Chain Management: Concepts and Case Studies, 109–125. John Wiley & Sons.
   Google Scholar
• Krafcik, J. F. 1988. “Triumph of the Lean Production System.” MIT Sloan Management Review 30 (1): 41.
   Web of Science ®Google Scholar
• Lagos, C., R. Herrera, and L. F. Alarcón. 2017. “Contributions of Information Technologies to Last Planner System Implementation.” Proc. Lean & Computing in Construction Congress (LC3), 1.
   Google Scholar
• Lapinski, A. R., M. J. Horman, and D. R. Riley. 2006. “Lean Processes for Sustainable Project Delivery.” Journal of Construction Engineering and Management 132 (10): 1083–1091. doi:10.1061/(ASCE)0733-9364(2006)132:10(1083).
   Web of Science ®Google Scholar
• LCI (Lean Construction Institute) 2013. Introduction to Pull Planning. Accessed 29 May 2020. http://www.Leanconstruction.org/media/docs/deliveryGuide/Appendix7.pdf
   Google Scholar
• Le, P. L., W. Elmughrabi, T. M. Dao, and A. Chaabane. 2020. “Present focuses and future directions of decision-making in construction supply chain management: a systematic review.” International Journal of Construction Management 20 (5): 490–509. doi:10.1080/15623599.2018.1488089.
   Google Scholar
• Li, C. Z., F. Xue, X. Li, J. Hong, and G. Q. Shen. 2018a. “An Internet of Things-Enabled BIM Platform for on-Site Assembly Services in Prefabricated Construction.” Automation in Construction 89: 146–161. doi:10.1016/j.autcon.2018.01.001.
   Web of Science ®Google Scholar
• Li, S., X. Wu, Y. Zhou, and X. Liu. 2017b. “A Study on the Evaluation of Implementation Level of Lean Construction in Two Chinese Firms.” Renewable and Sustainable Energy Reviews 71: 846–851. doi:10.1016/j.rser.2016.12.112.
   Web of Science ®Google Scholar
• Li, X., G. Q. Shen, P. Wu, H. Fan, H. Wu, and Y. Teng. 2018b. “RBL-PHP: Simulation of Lean Construction and Information Technologies for Prefabrication Housing Production.” Journal of Management in Engineering 34 (2): 04017053. doi:10.1061/(ASCE)ME.1943-5479.0000577.
   Web of Science ®Google Scholar
• Li, X., P. Wu, G. Q. Shen, X. Wang, and Y. Teng. 2017a. “Mapping the Knowledge Domains of Building Information Modeling (BIM): A Bibliometric Approach.” Automation in Construction 84: 195–206. doi:10.1016/j.autcon.2017.09.011.
   Web of Science ®Google Scholar
• Liker, J. 2004. The tanda way. Esensi.
   Google Scholar
• Lööw, J. 2019. “An Investigation into Lean Production Practice in Mining.” International Journal of Lean Six Sigma 10 (1): 123–142. doi:10.1108/IJLSS-07-2017-0085.
   Web of Science ®Google Scholar
• Love, P. E., and D. J. Edwards. 2004. “Forensic Project Management: The Underlying Causes of Rework in Construction Projects.” Civil Engineering and Environmental Systems 21 (3): 207–228. doi:10.1080/10286600412331295955.
   Web of Science ®Google Scholar
• Love, P. E., and H. Li. 2000. “Quantifying the Causes and Costs of Rework in Construction.” Construction Management and Economics 18 (4): 479–490. doi:10.1080/01446190050024897.
   Google Scholar
• Love, P. E., D. J. Edwards, S. Han, and Y. M. Goh. 2011. “Design Error Reduction: Toward the Effective Utilization of Building Information Modeling.” Research in Engineering Design 22 (3): 173–187. doi:10.1007/s00163-011-0105-x.
   Web of Science ®Google Scholar
• Love, P. E., R. Lopez, and J. T. Kim. 2014. “Design Error Management: interaction of People, Organisation and the Project Environment in Construction.” Structure and Infrastructure Engineering 10 (6): 811–820. doi:10.1080/15732479.2013.767843.
   Web of Science ®Google Scholar
• Love, P. E., P. Mandal, J. Smith, and H. Li. 2000. “Modelling the Dynamics of Design Error Induced Rework in Construction.” Construction Management and Economics 18 (5): 567–574. doi:10.1080/014461900407374.
   Google Scholar
• Lu, Q., J. Won, and J. C. Cheng. 2016. “A Financial Decision Making Framework for Construction Projects Based on 5D Building Information Modeling (BIM).” International Journal of Project Management 34 (1): 3–21. doi:10.1016/j.ijproman.2015.09.004.
   Web of Science ®Google Scholar
• Lu, Y., Z. Wu, R. Chang, and Y. Li. 2017. “Building Information Modeling (BIM) for Green Buildings: A Critical Review and Future Directions.” Automation in Construction 83: 134–148. doi:10.1016/j.autcon.2017.08.024.
   Web of Science ®Google Scholar
• Mahalingam, A., A. K. Yadav, and J. Varaprasad. 2015. “Investigating the Role of Lean Practices in Enabling BIM Adoption: Evidence from Two Indian Cases.” Journal of Construction Engineering and Management 141 (7): 05015006. doi:10.1061/(ASCE)CO.1943-7862.0000982.
   Web of Science ®Google Scholar
• Mahamadu, A. M., D. Navendren, P. Manu, R. Joseph, and K. Dziekonski. 2017. “Addressing Challenges to Building Information Modelling Implementation in UK: Designers’ Perspectives.” Journal of Construction Project Management and Innovation 7 (Supplement 1): 1908–1932.
   Google Scholar
• Mahmood, A., and S. Abrishami. 2020. BIM for Lean Building Surveying Services. Construction Innovation.
   Google Scholar
• Mano, A. P., S. E. G. da Costa, and E. P. de Lima. 2019. “Analysis of the Production Function in Civil Construction: A Driver for Lean Construction.” Journal of Lean Systems 4 (4): 107–133.
   Google Scholar
• Mardani, A., A. Jusoh, K. Nor, Z. Khalifah, N. Zakwan, and A. Valipour. 2015. “Multiple Criteria Decision-Making Techniques and Their Applications–A Review of the Literature from 2000 to 2014.” Economic Research-Ekonomska Istraživanja 28 (1): 516–571. doi:10.1080/1331677X.2015.1075139.
   Web of Science ®Google Scholar
• Matta, G., R. F. Herrera, C. Baladrón, Z. Giménez, and L. F. Alarcón. 2018. “Using BIM-Based Sheets as a Visual Management Tool for on-Site Instructions: A Case Study.” Proceedings of the 26th Annual Conference of the International Group for Lean Construction: Evolving Lean Construction towards Mature Production Management across Cultures and Frontiers, Chennai, India, 144–154.
   Google Scholar
• Matthews, J., P. E. Love, J. Mewburn, C. Stobaus, and C. Ramanayaka. 2018. “Building Information Modelling in Construction: insights from Collaboration and Change Management Perspectives.” Production Planning & Control 29 (3): 202–216. doi:10.1080/09537287.2017.1407005.
   Web of Science ®Google Scholar
• Mehrbod, S., S. Staub-French, N. Mahyar, and M. Tory. 2019. “Characterizing Interactions with BIM Tools and Artifacts in Building Design Coordination Meetings.” Automation in Construction 98: 195–213. doi:10.1016/j.autcon.2018.10.025.
   Web of Science ®Google Scholar
• Mehrbod, S., S. Staub-French, M. Tory, and N. Mahyar. 2015. “A Framework for Classifying Bim Design Coordination Issues.” 5th International/11th Construction Specialty Conference, 329–321.
   Google Scholar
• Mellado, F., and E. C. Lou. 2020. “Building Information Modelling, Lean and Sustainability: An Integration Framework to Promote Performance Improvements in the Construction Industry.” Sustainable Cities and Society 61: 102355. doi:10.1016/j.scs.2020.102355.
   Web of Science ®Google Scholar
• Meng, X. 2019. “Lean Management in the Context of Construction Supply Chains.” International Journal of Production Research 57 (11): 3784–3798. doi:10.1080/00207543.2019.1566659.
   Web of Science ®Google Scholar
• Mhando, Y. B., R. S. Mlinga, and H. M. Alinaitwe. 2018. “Variation Mitigation Model to Enhance Construction Performance of Public Building Projects in Tanzania.” American Journal of Civil Engineering and Architecture 6 (3): 105–118.
   Google Scholar
• Mills, A., P. E. Love, and P. Williams. 2009. “Defect Costs in Residential Construction.” Journal of Construction Engineering and Management 135 (1): 12–16. doi:10.1061/(ASCE)0733-9364(2009)135:1(12).
   Web of Science ®Google Scholar
• Moghadam, M. 2014. “Lean-Mod: An Approach to Modular Construction Manufacturing Production Efficiency Improvement.” Doctoral Thesis, University of Alberta, Canada.
   Google Scholar
• Moghadam, M.,. A. Alwisy, and M. Al-Hussein. 2012. “Integrated Lean/BIM Base Production Line Schedule Model for Modular Construction Manufacturing.” Construction Research Congress 2012: Construction Challenges in a Flat World, 1271–1280. doi:10.1061/9780784412329.128.
   Google Scholar
• Mollasalehi, S., A. J. Fleming, A. Talebi, and J. Underwood. 2016. “Development of an Experimental Waste Framework Based on Lean/BIM Concept in Construction Design.” Proceedings, 24th Annual Conference of the International Group for Lean Construction (IGLC), 193–202. The International Group for Lean Construction (IGLC).
   Google Scholar
• Morgan, J., and J. K. Liker. 2006. The Toyota Product Development System: Integrating People, Process, and Technology. Productivity Press.
   Google Scholar
• Mostafa, S., N. Chileshe, and T. Abdelhamid. 2016. Lean and Agile Integration within Offsite Construction Using Discrete Event Simulation. Construction Innovation.
   Google Scholar
• Murguia, D., X. Brioso, and A. Pimentel. 2016. “Applying Lean Techniques to Improve Performance in the Finishing Phase of a Residential Building.” Proc. 24th Annual Conference of the International Group for Lean Construction.
   Google Scholar
• Murphy, M. K., N. A. Black, D. L. Lamping, C. M. McKee, C. F. Sanderson, J. Askham, and T. Marteau. 1998. “Consensus Development Methods, and Their Use in Clinical Guideline Development.” Health Technology Assessment 2 (3): 1–88.
   Google Scholar
• Nascimento, D. L. D. M., E. D. Sotelino, T. P. S. Lara, R. G. G. Caiado, and P. Ivson. 2017. “Constructability in Industrial Plants Construction: A BIM-Lean Approach Using the Digital Obeya Room Framework.” Journal of Civil Engineering and Management 23 (8): 1100–1108. doi:10.3846/13923730.2017.1385521.
   Web of Science ®Google Scholar
• Nawari, N. O. 2012. “BIM Standard in off-Site Construction.” Journal of Architectural Engineering 18 (2): 107–113. doi:10.1061/(ASCE)AE.1943-5568.0000056.
   Google Scholar
• Nekoufar, S. 2011. “Standardization of Large Scale Industrial Project in Multi Projects Environment.” International Journal of Management Science and Engineering Management 6 (4): 260–266. doi:10.1080/17509653.2011.10671171.
   Google Scholar
• Nesensohn, C., D. Bryde, D. Fearon, and V. Hackett. 2014. Assessing Lean construction maturity. Proceedings of IGLC-22, June.
   Google Scholar
• Niu, Y., W. Lu, K. Chen, G. G. Huang, and C. Anumba. 2016. “Smart Construction Objects.” Journal of Computing in Civil Engineering 30 (4): 04015070. doi:10.1061/(ASCE)CP.1943-5487.0000550.
   Web of Science ®Google Scholar
• Núñez-Merino, M.,. J. M. Maqueira-Marín, J. Moyano-Fuentes, and P. J. Martínez-Jurado. 2020. “Information and Digital Technologies of Industry 4.0 and Lean Supply Chain Management: A Systematic Literature Review.” International Journal of Production Research 58 (16): 5034–5061. doi:10.1080/00207543.2020.1743896.
   Web of Science ®Google Scholar
• Ohno, T. 1988. Toyota Production System: Beyond Large-Scale Production. CRC Press.
   Google Scholar
• Olanrewaju, S. D., and O. E. Ogunmakinde. 2020. “Waste Minimisation Strategies at the Design Phase: Architects’ Response.” Waste Management 118: 323–330. doi:10.1016/j.wasman.2020.08.045.
   PubMed Web of Science ®Google Scholar
• O’Loingsigh, M., A. Hore, B. McAuley, and J. Deeney. 2014. “Aligning BIM and Lean Methodologies within the Capital Works Management Framework in Ireland.” Computing in Civil and Building Engineering (2014), 1522–1529. doi:10.1061/9780784413616.189.
   Google Scholar
• Opoku, D. G. J., S. Perera, R. Osei-Kyei, and M. Rashidi. 2021. “Digital Twin Application in the Construction Industry: A Literature Review.” Journal of Building Engineering 40: 102726.
   Web of Science ®Google Scholar
• Orji, I. J., S. Kusi-Sarpong, S. Huang, and D. Vazquez-Brust. 2020. “Evaluating the Factors That Influence Blockchain Adoption in the Freight Logistics Industry.” Transportation Research Part E: Logistics and Transportation Review 141: 102025. doi:10.1016/j.tre.2020.102025.
   Web of Science ®Google Scholar
• Osunsanmi, T. O., C. Aigbavboa, and A. Oke. 2018. “Construction 4.0: The Future of the Construction Industry in South Africa.” International Journal of Civil & Environmental Engineering 12 (3): 206–212.
   Google Scholar
• Panteli, C., A. Kylili, and P. A. Fokaides. 2020. “Building Information Modelling Applications in Smart Buildings: From Design to Commissioning and beyond a Critical Review.” Journal of Cleaner Production 265: 121766. doi:10.1016/j.jclepro.2020.121766.
   Web of Science ®Google Scholar
• Papadonikolaki, E., C. van Oel, and M. Kagioglou. 2019. “Organising and Managing Boundaries: A Structurational View of Collaboration with Building Information Modelling (BIM).” International Journal of Project Management 37 (3): 378–394. doi:10.1016/j.ijproman.2019.01.010.
   Web of Science ®Google Scholar
• Park, C. S., D. Y. Lee, O. S. Kwon, and X. Wang. 2013. “A Framework for Proactive Construction Defect Management Using BIM, Augmented Reality and Ontology-Based Data Collection Template.” Automation in Construction 33: 61–71. doi:10.1016/j.autcon.2012.09.010.
   Web of Science ®Google Scholar
• Pekuri, A., M. Herrala, A. Aapaoja, and H. Haapasalo. 2012. “Applying Lean in Construction–Cornerstones for Implementation.” Proceedings of the 20th Annual Conference of the International Group for Lean Construction, 18–20.
   Google Scholar
• Pohekar, S. D., and M. Ramachandran. 2004. “Application of Multi-Criteria Decision Making to Sustainable Energy Planning—A Review.” Renewable and Sustainable Energy Reviews 8 (4): 365–381. doi:10.1016/j.rser.2003.12.007.
   Web of Science ®Google Scholar
• Pishdad-Bozorgi, P.,. E. H. Moghaddam, and Y. Karasulu. 2013. “Advancing Target Price and Target Value Design Process in IPD Using BIM and Risk-Sharing Approaches.” Proceedings of the 49th ASC Annual International Conference Proceedings, San Luis Obispo, CA, USA, 9–13.
   Google Scholar
• Poirier, E. A., D. Forgues, and S. Staub-French. 2014. “Dimensions of Interoperability in the AEC Industry.” Construction Research Congress 2014: Construction in a Global Network, 1987–1996.
   Google Scholar
• Poirier, E., D. Forgues, and S. Staub-French. 2016. “Collaboration through Innovation: implications for Expertise in the AEC Sector.” Construction Management and Economics 34 (11): 769–789. doi:10.1080/01446193.2016.1206660.
   Web of Science ®Google Scholar
• Priven, V., and R. Sacks. 2016. “Impacts of the Social Subcontract and Last Planner System Interventions on the Trade-Crew Workflows of Multistory Residential Construction Projects.” Journal of Construction Engineering and Management 142 (7): 04016013. doi:10.1061/(ASCE)CO.1943-7862.0001102.
   Web of Science ®Google Scholar
• Radnor, Z., and P. Walley. 2008. “Learning to Walk before we Try to Run: Adapting Lean for the Public Sector.” Public Money and Management 28 (1): 13–20.
   Web of Science ®Google Scholar
• Rischmoller, L., L. F. Alarcón, and L. Koskela. 2006. “Improving Value Generation in the Design Process of Industrial Projects Using CAVT.” Journal of Management in Engineering 22 (2): 52–60. doi:10.1061/(ASCE)0742-597X(2006)22:2(52).
   Web of Science ®Google Scholar
• Roundtable, C. U. 2010. BIM implementation: An owner’s guide to getting started. Accessed 25 April 2013. http://www.Aia.Org/aiaucmp/groups/aia/documents/pdf/aiab085571.Pdfae
   Google Scholar
• Saaty, R. W. 2003. Decision Making in Complex Environments. SuperDecisions.
   Google Scholar
• Saaty, T. L. 1994. “How to Make a Decision: The Analytic Hierarchy Process.” Interfaces 24 (6): 19–43. doi:10.1287/inte.24.6.19.
   Web of Science ®Google Scholar
• Saaty, T. L. 1996. Decision Making with Dependence and Feedback: The Analytic Network Process, Vol. 4922. RWS Publ.
   Google Scholar
• Saaty, T. L. 2008. “Decision Making with the Analytic Hierarchy Process.” International Journal of Services Sciences 1 (1): 83–98. doi:10.1504/IJSSCI.2008.017590.
   Google Scholar
• Sacks, R., and M. Goldin. 2007. “Lean Management Model for Construction of High-Rise Apartment Buildings.” Journal of Construction Engineering and Management 133 (5): 374–384. doi:10.1061/(ASCE)0733-9364(2007)133:5(374).
   Web of Science ®Google Scholar
• Sacks, R., R. Barak, B. Belaciano, U. Gurevich, and E. Pikas. 2013. “KanBIM Workflow Management System: Prototype Implementation and Field Testing.” Lean Construction Journal: 19–35.
   Google Scholar
• Sacks, R., B. Dave, L. Koskela, and R. Owen. 2009. Analysis framework for the interaction between Lean construction and building information modelling.
   Google Scholar
• Sacks, R., L. Koskela, B. A. Dave, and R. Owen. 2010. “Interaction of Lean and Building Information Modeling in Construction.” Journal of Construction Engineering and Management 136 (9): 968–980. doi:10.1061/(ASCE)CO.1943-7862.0000203.
   Web of Science ®Google Scholar
• Sacks, R., M. Radosavljevic, and R. Barak. 2010. “Requirements for Building Information Modeling Based Lean Production Management Systems for Construction.” Automation in Construction 19 (5): 641–655. doi:10.1016/j.autcon.2010.02.010.
   Web of Science ®Google Scholar
• Sacks, R., M. Treckmann, and O. Rozenfeld. 2009. “Visualization of Work Flow to Support Lean Construction.” Journal of Construction Engineering and Management 135 (12): 1307–1315. doi:10.1061/(ASCE)CO.1943-7862.0000102.
   Web of Science ®Google Scholar
• Salem, O., J. Solomon, A. Genaidy, and I. Minkarah. 2006. “Lean Construction: From Theory to Implementation.” Journal of Management in Engineering 22 (4): 168–175. doi:10.1061/(ASCE)0742-597X(2006)22:4(168).
   Web of Science ®Google Scholar
• Sanchez, A., K. Hampson, and S. Vaux. 2016. Delivering Value with BIM. London: Taylor and Francis.
   Google Scholar
• Sarkis, J., and R. P. Sundarraj. 2000. “Factors for Strategic Evaluation of Enterprise Information Technologies.” International Journal of Physical Distribution & Logistics Management 30 (3/4): 196–220. doi:10.1108/09600030010325966.
   Google Scholar
• Sarkis, J. 2003. “A Strategic Decision Framework for Green Supply Chain Management.” Journal of Cleaner Production 11 (4): 397–409. doi:10.1016/S0959-6526(02)00062-8.
   Web of Science ®Google Scholar
• Sarkis, J., and R. P. Sundarraj. 2002. “Managerial Issues in Locating a Spare-Parts Hub for Digital Equipment Corporation.” Production and Inventory Management Journal 43 (3/4), 47.
   Google Scholar
• Scherer, R. J., and S. E. Schapke. 2011. “A Distributed Multi-Model-Based Management Information System for Simulation and Decision-Making on Construction Projects.” Advanced Engineering Informatics 25 (4): 582–599. doi:10.1016/j.aei.2011.08.007.
   Web of Science ®Google Scholar
• Schimanski, C. P., G. Pasetti Monizza, C. Marcher, and D. T. Matt. 2021. “Development of a BIM-based production planning and control system for Lean Construction through advancement and integration of existing management techniques.” Frontiers of engineering management 8 (3): 429–441. doi:10.1007/s42524-020-0105-5.
   Google Scholar
• Seth, D., N. Seth, and P. Dhariwal. 2017. “Application of Value Stream Mapping (VSM) for Lean and Cycle Time Reduction in Complex Production Environments: A Case Study.” Production Planning & Control 28 (5): 398–419. doi:10.1080/09537287.2017.1300352.
   Web of Science ®Google Scholar
• Seth, D., V. K. Nemani, S. Pokharel, and A. Y. Al Sayed. 2018. “Impact of Competitive Conditions on Supplier Evaluation: A Construction Supply Chain Case Study.” Production Planning & Control 29 (3): 217–235. doi:10.1080/09537287.2017.1407971.
   Web of Science ®Google Scholar
• Shewhart, W. A. 1931. Economic Control of Quality of Manufactured Product. London: Macmillan And Co Ltd.
   Google Scholar
• Shou, W., X. Wang, J. Wang, L. Hou, and M. Truijens. 2014. “Integration of BIM and Lean Concepts to Improve Maintenance Efficiency: A Case Study.” Computing in Civil and Building Engineering (2014), 373–380. doi:10.1061/9780784413616.047.
   Google Scholar
• Shou, W., J. Wang, P. Wu, and X. Wang. 2020. “Lean Management Framework for Improving Maintenance Operation: Development and Application in the Oil and Gas Industry.” Production Planning & Control 32 (7): 585–602.
   Web of Science ®Google Scholar
• Sipahi, S., and M. Timor. 2010. “The Analytic Hierarchy Process and Analytic Network Process: An Overview of Applications.” Management Decision 48 (5): 775–808. doi:10.1108/00251741011043920.
   Web of Science ®Google Scholar
• Small, E. P., K. Al Hamouri, and H. Al Hamouri. 2017. “Examination of Opportunities for Integration of Lean Principles in Construction in Dubai.” Procedia Engineering 196: 616–621. doi:10.1016/j.proeng.2017.08.049.
   Google Scholar
• Spearman, M. L., and W. J. Hopp. 1996. Factory Physics: Foundations of Manufacturing Management. Chicago, IL: Irwin.
   Google Scholar
• Spitler, L. E. 2014. “The Effect of Inter-Team Dynamics on the Constructability of the BIM Model.” Proc. 22nd Ann. Conf. of the Int’l Group for Lean Construction, 957–968.
   Google Scholar
• Sriprasert, E., and N. Dawood. 2003. “Multi-Constraint Information Management and Visualisation for Collaborative Planning and Control in Construction.” Journal of Information Technology in Construction 8: 341–366.
   Google Scholar
• Sullivan, C. C. 2007. “Integrated BIM and Design Review for Safer, Better Buildings.” Architectural Record 6: 191–199.
   Google Scholar
• Sun, C., S. Jiang, M. J. Skibniewski, Q. Man, and L. Shen. 2015. “A Literature Review of the Factors Limiting the Application of BIM in the Construction Industry.” Technological and Economic Development of Economy 23 (5): 764–779. doi:10.3846/20294913.2015.1087071.
   Web of Science ®Google Scholar
• Taguchi, G. 1993. “Robust Technology Development.” Mechanical Engineering-CIME 115 (3): 60–63.
   Web of Science ®Google Scholar
• Tan, T.,. K. Chen, F. Xue, and W. Lu. 2019. “Barriers to Building Information Modeling (BIM) Implementation in China’s Prefabricated Construction: An Interpretive Structural Modeling (ISM) Approach.” Journal of Cleaner Production 219: 949–959. doi:10.1016/j.jclepro.2019.02.141.
   Web of Science ®Google Scholar
• Tang, S., D. R. Shelden, C. M. Eastman, P. Pishdad-Bozorgi, and X. Gao. 2019. “A Review of Building Information Modeling (BIM) and the Internet of Things (IoT) Devices Integration: Present Status and Future Trends.” Automation in Construction 101: 127–139. doi:10.1016/j.autcon.2019.01.020.
   Web of Science ®Google Scholar
• Tauriainen, M., P. Marttinen, B. Dave, and L. Koskela. 2016. “The Effects of BIM and Lean Construction on Design Management Practices.” Procedia Engineering 164: 567–574. doi:10.1016/j.proeng.2016.11.659.
   Google Scholar
• Terreno, S., S. Asadi, and C. Anumba. 2019. “An Exploration of Synergies between Lean Concepts and BIM in FM: A Review and Directions for Future Research.” Buildings 9 (6): 147. doi:10.3390/buildings9060147.
   Web of Science ®Google Scholar
• Tezel, A., L. Koskela, and Z. Aziz. 2018. “Current Condition and Future Directions for Lean Construction in Highways Projects: A Small and Medium-Sized Enterprises (SMEs) Perspective.” International Journal of Project Management 36 (2): 267–286. doi:10.1016/j.ijproman.2017.10.004.
   Web of Science ®Google Scholar
• Tezel, A., M. Taggart, L. Koskela, P. Tzortzopoulos, J. Hanahoe, and M. Kelly. 2020. “Lean Construction and BIM in Small and Medium-Sized Enterprises (SMEs) in Construction: A Systematic Literature Review.” Canadian Journal of Civil Engineering 47 (2): 186–201. doi:10.1139/cjce-2018-0408.
   Web of Science ®Google Scholar
• Tezel, B. A., and Z. U. H. Aziz. 2017. “From Conventional to IT Based Visual Management: A Conceptual Discussion for Lean Construction.” Journal of Information Technology in Construction 22: 220–246.
   Web of Science ®Google Scholar
• Tezel, A., L. Koskela, and P. Tzortzopoulos. 2016. “Visual Management in Production Management: A Literature Synthesis.” Journal of Manufacturing Technology Management 27 (6): 766–799. doi:10.1108/JMTM-08-2015-0071.
   Web of Science ®Google Scholar
• Tommelein, I. D., and G. Ballard. 1997. Look-Ahead Planning: Screening and Pulling, 20–21. eScholarship, University of California.
   Google Scholar
• Triantaphyllou, E. 2000. “Multi-Criteria Decision Making Methods.” In Multi-Criteria Decision Making Methods: A Comparative Study, 5–21. New York, NY: Springer US.
   Google Scholar
• Tribelsky, E., and R. Sacks. 2011. “An Empirical Study of Information Flows in Multidisciplinary Civil Engineering Design Teams Using Lean Measures.” Architectural Engineering and Design Management 7 (2): 85–101. doi:10.1080/17452007.2011.582332.
   Google Scholar
• US Census Bureau Construction Expenditures Branch 2018. “US Census Bureau construction spending survey.” Accessed 8 December 2018. https://www.census.gov/construction/c30/c30index.html
   Google Scholar
• Vaidyanathan, K., S. Mohanbabu, P. Sriram, S. Rahman, and S. Arunkumar. 2016. “Application of Lean Principles to Managing Construction of an IT Commercial Facility-an Indian Experience.” 24th Annual Conference of the International Group for Lean Construction, 183–192. Boston, MA: International Group for Lean Construction.
   Google Scholar
• Viana, D. D., B. Mota, C. T. Formoso, M. Echeveste, M. Peixoto, and C. Rodrigues. 2010. “A Survey on the Last Planner System: Impacts and Difficulties for Implementation in Brazilian Companies.” Annual Conference of the International Group for Lean Construction, Vol. 18).
   Google Scholar
• Wandahl, S. 2014. “Lean Construction with or without Lean–Challenges of Implementing Lean Construction.” Proceedings of the 22nd Annual Conference of the International Group for Lean Construction, 97–108. Oslo: IGLC.
   Google Scholar
• Wang, J. J., Y. Y. Jing, C. F. Zhang, and J. H. Zhao. 2009. “Review on Multi-Criteria Decision Analysis Aid in Sustainable Energy Decision-Making.” Renewable and Sustainable Energy Reviews 13 (9): 2263–2278. doi:10.1016/j.rser.2009.06.021.
   Web of Science ®Google Scholar
• Wang, J., X. Wang, W. Shou, H. Y. Chong, and J. Guo. 2016. “Building Information Modeling-Based Integration of MEP Layout Designs and Constructability.” Automation in Construction 61: 134–146. doi:10.1016/j.autcon.2015.10.003.
   Web of Science ®Google Scholar
• Ward, A., J. K. Liker, J. J. Cristiano, and D. K. Sobek. 1995. “The Second Toyota Paradox: How Delaying Decisions Can Make Better Cars Faster.” Sloan Management Review 36: 43–43.
   Google Scholar
• Womack, J. P., and D. T. Jones. 2003. Lean Thinking: Banish Waste and Create Wealth in Your Corporation, Revised and Updated (published 1996).
   Google Scholar
• Womack, J. P., D. T. Jones, and D. Roos. 2007. The Machine That Changed the World: The Story of Lean Production–Toyota’s Secret Weapon in the Global Car Wars That is Now Revolutionizing World Industry. Simon and Schuster.
   Google Scholar
• Wu, P., and S. P. Low. 2012. “Lean Management and Low Carbon Emissions in Precast Concrete Factories in Singapore.” Journal of Architectural Engineering 18 (2): 176–186. doi:10.1061/(ASCE)AE.1943-5568.0000053.
   Google Scholar
• Zaim, S., M. Sevkli, H. Camgöz-Akdağ, O. F. Demirel, A. Y. Yayla, and D. Delen. 2014. “Use of ANP Weighted Crisp and Fuzzy QFD for Product Development.” Expert Systems with Applications 41 (9): 4464–4474. doi:10.1016/j.eswa.2014.01.008.
   Web of Science ®Google Scholar
• Zegarra, O., and L. F. Alarcón. 2019. “Coordination of Teams, Meetings, and Managerial Processes in Construction Projects: Using a Lean and Complex Adaptive Mechanism.” Production Planning & Control 30 (9): 736–763. doi:10.1080/09537287.2019.1578905.
   Web of Science ®Google Scholar
• Zhu, Q., P. Shah, and J. Sarkis. 2018. “Addition by Subtraction: Integrating Product Deletion with Lean and Sustainable Supply Chain Management.” International Journal of Production Economics 205: 201–214.
   Web of Science ®Google Scholar
• Zimina, D., G. Ballard, and C. Pasquire. 2012. “Target Value Design: Using Collaboration and a Lean Approach to Reduce Construction Cost.” Construction Management and Economics 30 (5): 383–398. doi:10.1080/01446193.2012.676658.
   Google Scholar
• Zomer, T., A. Neely, R. Sacks, and A. Parlikad. 2021. “Exploring the Influence of Socio-Historical Constructs on BIM Implementation: An Activity Theory Perspective.” Construction Management and Economics 39 (1): 1–20. doi:10.1080/01446193.2020.1792522.
   Web of Science ®Google Scholar