A two-stage model of adaptable product platform for engineering-to-order configuration design

References

• Berglund, F., and A. Claesson. 2005. “Utilising the Concept of a Design's Bandwidth to Achieve Product Platform Effectiveness.” Proceedings of ICED 2005, Melbourne, Australia, August 15–18.
   Google Scholar
• Chai, K. H., Q. Wang, M. Song, J. I. M. Halman, and A. C. Brombacher. 2012. “Understanding Competencies in Platform-Based Product Development: Antecedents and Outcomes.” Journal of Product Innovation Management 29 (3): 452–472. doi: 10.1111/j.1540-5885.2012.00917.x
   Web of Science ®Google Scholar
• Claesson, A. 2006. A Configurable Component Framework Supporting Platform-Based Product Development. Gothenburg: Doctor of Engineering, Department of Product and Production Development, Chalmers University of Technology.
   Google Scholar
• Du, G., R. J. Jiao, and M. Chen. 2014. “Joint Optimization of Product Family Configuration and Scaling Design by Stackelberg Game.” European Journal of Operational Research 232 (2): 330–341. doi: 10.1016/j.ejor.2013.07.021
   Web of Science ®Google Scholar
• Edholm, P., H. Johannesson, and R. Söderberg. 2010. “Geometry Interactions in Configurable Platform Models.” International Design Conference – DESIGN 2010, Dubrovnik, May 17–20.
   Google Scholar
• Edholm, P., A. L. Wahl, H. Johannesson, and R. Söderberg. 2009. “Knowledge Based Configuration of Integrated Product and Process Platform.” ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2009, San Diego, CA, August 30–September 2.
   Google Scholar
• Erixon, G. 1998. Modular Function Deployment – a Method for Product Modularisation. Stockholm: Department of Manufacturing Systems, The Royal Institute of Technology.
   Google Scholar
• Fujita, K., H. Sakaguchi, and S. Akagi. 1999. “Product Variety Deployment and Its Optimization under Modular Architecture and Module Commonalization.” Proceedings of Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas, NV, USA, September 12–16.
   Google Scholar
• Gershenson, J. K., G. J. Prasad, and Y. Zhang. 2003. “Product Modularity: Definitions and Benefits.” Journal of Engineering Design 14 (3): 295–313. doi: 10.1080/0954482031000091068
   Web of Science ®Google Scholar
• Gonzalez-Zugasti, J. P., and K. N. Otto. 2000. “Modular Platform-Based Product Family Design.” Proceedings of ASME DETC, Baltimore, MD, September 10–13.
   Google Scholar
• Gu, P., M. Hashemian, and A. Y. C. Nee. 2004. “Adaptable Design.” CIRP Annals-Manufacturing Technology 53 (2): 539–557. doi: 10.1016/S0007-8506(07)60028-6
   Web of Science ®Google Scholar
• Gu, P., and S. Sosale. 1999. “Product Modularization for Life Cycle Engineering.” Robotics and Computer-Integrated Manufacturing 15 (5): 387–401. doi: 10.1016/S0736-5845(99)00049-6
   Web of Science ®Google Scholar
• Gu, P., D. Xue, and A. Y. C. Nee. 2009. “Adaptable Design: Concepts, Methods, and Applications.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223 (11): 1367–1387.
   Google Scholar
• Gunasekaran, A. 1998. “Agile Manufacturing: Enablers and an Implementation Framework.” International Journal of Production Research 36 (5): 1223–1247. doi: 10.1080/002075498193291
   Web of Science ®Google Scholar
• Hofer, A. P., and J. I. M. Halman. 2005. “The Potential of Layout Platforms for Modular Complex Products and Systems.” Journal of Engineering Design 16 (2): 237–255. doi: 10.1080/09544820500031518
   Web of Science ®Google Scholar
• Huang, G. Q., and K. L. Mak. 1999. “Current Practices of Engineering Change Management in UK Manufacturing Industries.” International Journal of Operations & Production Management 19 (1): 21–37. doi: 10.1108/01443579910244205
   Web of Science ®Google Scholar
• Jarratt, T., J. Clarkson, and C. Eckert. 2005. “Engineering Change.” In Design Process Improvement, edited by J. Clarkson, and C. Eckert, 262–285. London: Springer.
   Google Scholar
• Jiao, J. R., and C.-H. Chen. 2006. “Customer Requirement Management in Product Development: A Review of Research Issues.” Concurrent Engineering 14 (3): 173–185. doi: 10.1177/1063293X06068357
   Web of Science ®Google Scholar
• Jiao, J., T. W. Simpson, and Z. Siddique. 2007. “Product Family Design and Platform-Based Product Development: A State-of-the-Art Review.” Journal of Intelligent Manufacturing 18 (1): 1–3. doi: 10.1007/s10845-007-0001-4
   Web of Science ®Google Scholar
• Johannesson, H. 2014. “Emphasizing Reuse of Generic Assets Through Integrated Product and Production System Development Platforms.” In Advances in Product Family and Product Platform Design, edited by T. W. Simpson, J. R. Jiao, Z. Siddique, and K. Hölttä-Otto, 119–146. New York: Springer.
   Google Scholar
• Laurie, D. L., Y. L. Doz, and C. P. Sheer. 2006. “Creating New Growth Platforms.” Harvard Business Review 84 (5): 80–90, 156.
   PubMed Web of Science ®Google Scholar
• Levandowski, C., D. Corin Stig, D. Bergsjö, A. Forslund, R. Söderberg, and H. Johannesson. 2013. “An Integrated Approach to Technology Platform and Product Platform Development.” Concurrent Engineering – Research and Applications 21 (1): 65–83.
   Web of Science ®Google Scholar
• Levandowski, C., P. Edholm, F. Ekstedt, J. Carlsson, R. Söderberg, and H. Johannesson. 2011. “PLM Architecture for Optimization of Geometrical Interfaces in a Product Platform.” ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, August 28–31.
   Google Scholar
• Levandowski, C., M. T. Michaelis, and H. Johannesson. 2014a. “Set-Based Development Using an Integrated Product and Manufacturing System Platform.” Concurrent Engineering – Research and Applications 22 (3): 234–252. doi: 10.1177/1063293X14537654
   Web of Science ®Google Scholar
• Levandowski, C., D. Raudberget, and H. Johannesson. 2014b. “Set-Based Concurrent Engineering for Early Phases in Platform Development.” International Conference on Concurrent Engineering – CE2014, Beijing, September 8–10.
   Google Scholar
• Li, Z., Z. Cheng, Y. Feng, and J. Yang. 2013. “An Integrated Method for Flexible Platform Modular Architecture Design.” Journal of Engineering Design 24 (1): 25–44. doi: 10.1080/09544828.2012.668614
   Web of Science ®Google Scholar
• Li, Y., D. Xue, and P. Gu. 2008. “Design for Product Adaptability.” Concurrent Engineering 16 (3): 221–232. doi: 10.1177/1063293X08096178
   Web of Science ®Google Scholar
• Loch, C. H., and C. Terwiesch. 1999. “Accelerating the Process of Engineering Change Orders: Capacity and Congestion Effects.” Journal of Product Innovation Management 16 (2): 145–159. doi: 10.1016/S0737-6782(98)00042-3
   Web of Science ®Google Scholar
• Meyer, M. H., and A. P. Lehnerd. 1997. The Power of Product Platforms: Building Value and Cost Leadership. New York: Free Press.
   Google Scholar
• Michaelis, M. T. 2013. “Co-development of Products and Manufacturing Systems Using Integrated Platform Models.” Doctoral thesis, Department of Product and Production Development, Chalmers University of Technology, Gothenburg.
   Google Scholar
• Michaelis, M. T., C. Levandowski, and H. Johannesson. 2013. “Set-Based Concurrent Engineering for Preserving Design Bandwidth in Product and Manufacturing System Platforms.” Proceedings of ASME IMECE, San Diego, CA, November 15–21.
   Google Scholar
• Ong, S. K., Q. L. Xu, and A. Y. C. Nee. 2006. “Design Reuse Methodology for Product Family Design.” CIRP Annals-Manufacturing Technology 55 (1): 161–164. doi: 10.1016/S0007-8506(07)60389-8
   Web of Science ®Google Scholar
• Pedersen, R. 2009. Product Platform Modelling – Contributions to the Discipline of Visual Product Platform Modelling. Kongens Lyngby: Department of Management Engineering, Technical University of Denmark.
   Google Scholar
• Pine, B. J. 1999. Mass Customization: The New Frontier in Business Competition. Boston, MA: Harvard Business Press.
   Google Scholar
• Robertson, D., and K. Ulrich. 1998. “Planning for Product Platforms.” Sloan Management Review 39 (4): 19–31.
   Google Scholar
• Schachinger, P., and H. L. Johannesson. 2000. “Computer Modelling of Design Specifications.” Journal of Engineering Design 11 (4): 317–329. doi: 10.1080/0954482001000935
   Web of Science ®Google Scholar
• Simpson, T. W. 2004. “Product Platform Design and Customization: Status and Promise.” Artificial Intelligence for Engineering Design, Analysis and Manufacturing 18 (1): 3–20. doi: 10.1017/S0890060404040028
   Web of Science ®Google Scholar
• Simpson, T. W., J. R. Maier, and F. Mistree. 2001. “Product Platform Design: Method and Application.” Research in Engineering Design 13 (1): 2–22. doi: 10.1007/s001630100002
   Web of Science ®Google Scholar
• Svensson, D., and J. Malmqvist. 2002. “Strategies for Product Structure Management at Manufacturing Firms.” Journal of Computing and Information Science in Engineering 2 (1): 50–58. doi: 10.1115/1.1471356
   Google Scholar
• Terwiesch, C., and C. H. Loch. 1999. “Managing the Process of Engineering Change Orders: The Case of the Climate Control System in Automobile Development.” Journal of Product Innovation Management 16 (2): 160–172. doi: 10.1016/S0737-6782(98)00041-1
   Web of Science ®Google Scholar
• van Veen, E. A. 1991. “Modeling Product Structures by Generic Bills-Of-Material.” Ph.D. thesis, Eindhoven University of Technology, Eindhoven.
   Google Scholar
• Wahl, A. L., and H. Johannesson. 2010. “Managing Design Change in Configurable Component Based Product Platforms.” Proceedings of the 8th Biannual Conference NordDesign 2010, Gothenburg, August 25–27.
   Google Scholar
• Wiendahl, H.-H. 2009. “Adaptive Production Planning and Control – Elements and Enablers of Changeability.” In Changeable and Reconfigurable Manufacturing Systems, edited by H. A. ElMaraghy, 197–212. London: Springer.
   Google Scholar
• Xu, Q. L., S. K. Ong, and A. Y. C. Nee. 2006. “Function-based Design Synthesis Approach to Design Reuse.” Research in Engineering Design 17 (1): 27–44. doi: 10.1007/s00163-006-0015-5
   Web of Science ®Google Scholar
• Xu, Q. L., S. K. Ong, and A. Y. C. Nee. 2007. “Evaluation of Product Performance in Product Family Design Re-use.” International Journal of Production Research 45 (18–19): 4119–4141. doi: 10.1080/00207540701440147
   Web of Science ®Google Scholar
• Xue, D., G. Hua, V. Mehrad, and P. Gu. 2012. “Optimal Adaptable Design for Creating the Changeable Product Based on Changeable Requirements Considering the Whole Product Life-cycle.” Journal of Manufacturing Systems 31 (1): 59–68. doi: 10.1016/j.jmsy.2011.04.003
   Web of Science ®Google Scholar