Fresh in My Mind! Investigating the effects of the order of presenting opportunistic and restrictive design for additive manufacturing content on students’ creativity

References

• “3D Printing Service – MIT Project Manus”. n.d. Accessed January 28, 2019. https://project-manus.mit.edu/3d-printing-service.
   Google Scholar
• “3D Printing Services | Case School of Engineering”. n.d. Accessed January 28, 2019. http://engineering.case.edu/sears-thinkbox/use/3d-printing-services.
   Google Scholar
• Aguilera, Efrain, Jorge Ramos, David Espalin, Fernando Cedillos, Dan Muse, Ryan Wicker, and Eric Macdonald. 2013. “3D Printing of Electro Mechanical Systems.” International Solid Freeform Fabrication Symposium, 950–961. http://sffsymposium.engr.utexas.edu/Manuscripts/2013/2013-76-Aguilera.pdf.
   Google Scholar
• Ahn, Sung-Hoon, Michael Montero, Dan Odell, Shad Roundy, and Paul K. Wright. 2002. “Anisotropic Material Properties of Fused Deposition Modeling ABS.” Rapid Prototyping Journal 8 (4): 248–257. doi:10.1108/13552540210441166.
   Web of Science ®Google Scholar
• Amabile, Teresa M. 1996. Creativity in Context: Update to the Social Psychology of Creativity. Boulder, CO: Westview Press.
   Google Scholar
• Anderson, Michael C. 2009. “Incidental Forgetting.” In Memory, edited by Alan D. Baddeley, M. W. Eysenck, and Michael C. Anderson, 191–216. New York, NY: Psychology Press.
   Google Scholar
• Anderson, Michael C., Robert A. Bjork, and Elizabeth L. Bjork. 1994. “Remembering Can Cause Forgetting: Retrieval Dynamics in Long-Term Memory.” Journal of Experimental Psychology: Learning, Memory, and Cognition 20 (5): 1063–1087. doi:10.1037/0278-7393.20.5.1063.
   PubMed Web of Science ®Google Scholar
• Anderson, Michael C., and James H. Neely. 1996. “Interference and Inhibition in Memory Retrieval.” Memory (Hove, England). doi:10.1016/b978-012102570-0/50010-0.
   Google Scholar
• Baer, John, and Sharon S. McKool. 2016. “Assessing Creativity Using the Consensual Assessment Technique.” Handbook of Research on Assessment Technologies, Methods, and Applications in Higher Education January 2009: 65–77. doi:10.4018/978-1-60566-667-9.ch004.
   Google Scholar
• Bandura, A. 1977. “Self-Efficacy: Toward a Unifying Theory of Behavioral Change.” Psychological Review 84 (2): 191–215. doi:10.1037/0033-295X.84.2.191.
   PubMed Web of Science ®Google Scholar
• Barnes, Jean M., and Benton J. Underwood. 1959. “‘Fate’ of First-List Associations in Transfer Theory.” Journal of Experimental Psychology 58 (2): 97–105. doi:10.1037/h0047507.
   PubMedGoogle Scholar
• Bellini, Anna, and Selçuk Güçeri. 2003. “Mechanical Characterization of Parts Fabricated Using Fused Deposition Modeling.” Rapid Prototyping Journal 9 (4): 252–264. doi:10.1108/13552540310489631.
   Web of Science ®Google Scholar
• Besemer, Susan P. 1998. “Creative Product Analysis Matrix: Testing the Model Structure and a Comparison Among Products-Three Novel Chairs.” Creativity Research Journal 11 (4): 333–346. doi:10.1207/s15326934crj1104.
   Web of Science ®Google Scholar
• Besemer, Susan P, and Karen O’Quin. 1999. “Confirming the Three-Factor Creative Product Analysis Matrix Model in an American Sample.” Creativity Research Journal 12 (4): 329–337. doi:10.1207/s15326934crj1204.
   Web of Science ®Google Scholar
• Blaxton, Teresa A., and James H. Neely. 1983. “Inhibition from Semantically Related Primes: Evidence of a Category-Specific Inhibition.” Memory & Cognition 11 (5): 500–510. doi:10.3758/BF03196987.
   PubMed Web of Science ®Google Scholar
• Bloom, Benjamin S., M. D. Engelhart, E. J. Furst, W. H. Hill, and David R. Krathwohl. 1966/1956. “Taxonomy of Educational Objectives: The Classification of Educational Goals.” In Taxonomy of Educational Objectives, edited by Benjamin S. Bloom, 207. New York: Longmans, Green.
   Google Scholar
• Blösch-Paidosh, Alexandra, Saeema Ahmed-Kristensen, and Kristina Shea. 2019. “Evaluating the Potential of Design for Additive Manufacturing Heuristic Cards to Stimulate Novel Product Redesigns.” In Volume 2A: 45th Design Automation Conference, 1–10. Anaheim, CA: American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2019-97865.
   Google Scholar
• Booth, Joran W., Jeffrey Alperovich, Pratik Chawla, Jiayan Ma, Tahira N. Reid, and Karthik Ramani. 2017. “The Design for Additive Manufacturing Worksheet.” Journal of Mechanical Design 139 (10): 1–9. doi:10.1115/1.4037251.
   Web of Science ®Google Scholar
• Boothroyd, Geoffrey. 1994. “Product Design for Manufacture and Assembly.” Computer-Aided Design 26 (7): 505–520. doi:10.1016/0010-4485(94)90082-5.
   Web of Science ®Google Scholar
• Boschetto, Alberto, and Luana Bottini. 2016. “Design for Manufacturing of Surfaces to Improve Accuracy in Fused Deposition Modeling.” Robotics and Computer-Integrated Manufacturing 37: 103–114. doi:10.1016/j.rcim.2015.07.005.
   Web of Science ®Google Scholar
• Bransford, John D., Ann L. Brown, and Rodney R. Cocking. 1999. “Learning and Transfer.” In How People Learn : Brain, Mind, Experience, and School, 39–66. http://books.nap.edu/openbook.php?record_id=6160&page=39.
   Google Scholar
• Britt, S. H. 1935. “Retroactive Inhibition: A Review of the Literature.” Psychological Bulletin 32 (6): 381–440. doi:10.1037/h0061316.
   Google Scholar
• Brown, John. 1968. “Reciprocal Facilitation and Impairment of Free Recall.” Psychonomic Science 10 (2): 41–42. doi:10.3758/BF03331397.
   Google Scholar
• Calì, Jacques, Dan A. Calian, Cristina Amati, Rebecca Kleinberger, Anthony Steed, Jan Kautz, and Tim Weyrich. 2012. “3D-Printing of Non-Assembly, Articulated Models.” ACM Transactions on Graphics 31 (6): 1–8. doi:10.1145/2366145.2366149.
   Web of Science ®Google Scholar
• Campbell, Ian, David Bourell, and Ian Gibson. 2012. “Additive Manufacturing: Rapid Prototyping Comes of Age.” Rapid Prototyping Journal 18 (4): 255–258. doi:10.1108/13552541211231563.
   Web of Science ®Google Scholar
• Carroll, Beth E., Todd A. Palmer, and Allison M. Beese. 2015. “Anisotropic Tensile Behavior of Ti-6Al-4V Components Fabricated with Directed Energy Deposition Additive Manufacturing.” Acta Materialia 87: 309–320. doi:10.1016/j.actamat.2014.12.054.
   Web of Science ®Google Scholar
• Cepeda, Nicholas J., Noriko Coburn, Doug Rohrer, John T. Wixted, Michael C. Mozer, and Harold Pashler. 2009. “Optimizing Distributed Practice Theoretical Analysis and Practical Implications.” Experimental Psychology 56 (4): 236–246. doi:10.1027/1618-3169.56.4.236.
   PubMed Web of Science ®Google Scholar
• Cepeda, Nicholas J., Harold Pashler, Edward Vul, John T. Wixted, and Doug Rohrer. 2006. “Distributed Practice in Verbal Recall Tasks: A Review and Quantitative Synthesis.” Psychological Bulletin 132 (3): 354–380. doi:10.1037/0033-2909.132.3.354.
   PubMed Web of Science ®Google Scholar
• Cepeda, Nicholas J., Edward Vul, Doug Rohrer, John T. Wixted, and Harold Pashler. 2008. “Spacing Effects in Learning: A Temporal Ridgeline of Optimal Retention: Research Article.” Psychological Science 19 (11): 1095–1102. doi:10.1111/j.1467-9280.2008.02209.x.
   PubMed Web of Science ®Google Scholar
• Chu, Chen, Greg Graf, and David W. Rosen. 2008. “Design for Additive Manufacturing of Cellular Structures.” Computer-Aided Design and Applications 5 (5): 686–696. doi:10.3722/cadaps.2008.686-696.
   Google Scholar
• Cronbach, Lee J. 1951. “Coefficient Alpha and the Internal Structure of Tests.” Psychometrika 16 (3): 297–334. doi:10.1007/BF02310555.
   Web of Science ®Google Scholar
• Das, Paramita, Ramya Chandran, Rutuja Samant, and Sam Anand. 2015. “Optimum Part Build Orientation in Additive Manufacturing for Minimizing Part Errors and Support Structures.” In 43rd Proceedings of the North American Manufacturing Research Institution of SME, Vol. 1, 309–330. Elsevier B.V. https://doi.org/10.1016/j.promfg.2015.09.041.
   Google Scholar
• Delfs, P., M. Toows, and H. J. Schmid. 2016. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing 12: 314–320. doi:10.1016/j.addma.2016.06.003.
   Web of Science ®Google Scholar
• Diegel, Olaf, Axel Nordin, and Damien Motte. 2019. “Teaching Design for Additive Manufacturing Through Problem-Based Learning.” In Additive Manufacturing—Developments in Training and Education, 139–149. Springer International Publishing AG. https://doi.org/10.1007/978-3-319-76084-1_10.
   Google Scholar
• Donaldson, Brent. 2019. “Why GM’s Electric Future is also an Additive Future.” https://www.additivemanufacturing.media/articles/why-gms-electric-future-is-also-an-additive-future.
   Google Scholar
• Doubrovski, E. L., E. Y. Tsai, D. Dikovsky, J. M. P. Geraedts, H. Herr, and N. Oxman. 2015. “Voxel-Based Fabrication Through Material Property Mapping: A Design Method for Bitmap Printing.” Computer-Aided Design 60: 3–13. doi:10.1016/j.cad.2014.05.010.
   Web of Science ®Google Scholar
• Ebbinghaus, Hermann. 1913. Memory: A Contribution to Experimental Psychology. Teachers’ College, Columbia University. https://doi.org/10.5214/ans.0972.7531.200408.
   Google Scholar
• Fahad, Muhammad, and Neil Hopkinson. 2012. “A New Benchmarking Part for Evaluating the Accuracy and Repeatability of Additive Manufacturing (AM) Processes.” 2nd international conference on mechanical, production, and automobile engineering, 234–238. http://psrcentre.org/images/extraimages/412635.pdf.
   Google Scholar
• Faul, Franz, Edgar Erdfelder, Albert Georg Lang, and Axel Buchner. 2007. “G*Power 3: A Flexible Statistical Power Analysis Program for the Social, Behavioral, and Biomedical Sciences.” Behavior Research Methods 39 (2): 175–191. doi:10.3758/BF03193146.
   PubMed Web of Science ®Google Scholar
• Ferchow, J., C. Klahn, and M. Meboldt. 2018. “Enabling Graduate Students to Design for Additive Manufacturing Through Teaching and Experience Transfer.” Proceedings of the 20th international conference on engineering and product design education, E and PDE 2018. doi:10.3929/ethz-b-000288709
   Google Scholar
• Fiet, James O., and Pankaj C. Patel. 2008. “Entrepreneurial Discovery as Constrained, Sytematic Search.” Small Business Economics 30 (3): 215–229. doi:10.1007/s11187-006-9010-5.
   Web of Science ®Google Scholar
• Fisher, Ronald P., and Fergus I.M. Craik. 1980. “The Effects of Elaboration on Recognition Memory.” Memory & Cognition 8 (5): 400–404. doi:10.3758/BF03211136.
   PubMed Web of Science ®Google Scholar
• Ford, Simon, and Tim Minshall. 2019. “Invited Review Article: Where and How 3D Printing Is Used in Teaching and Education.” Additive Manufacturing 25 (October 2017): 131–150. doi:10.1016/j.addma.2018.10.028.
   Web of Science ®Google Scholar
• Garland, Anthony, and Georges Fadel. 2015. “Design and Manufacturing Functionally Gradient Material Objects With an Off the Shelf Three-Dimensional Printer: Challenges and Solutions.” Journal of Mechanical Design 137 (11): 111407. doi:10.1115/1.4031097.
   Web of Science ®Google Scholar
• Gibson, Ian, David Rosen, and Brent Stucker. 2015. Additive Manufacturing Technologies. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Second Edition. New York, NY: Springer New York. https://doi.org/10.1007/978-1-4939-2113-3.
   Google Scholar
• Gielnik, Michael M., Michael Frese, Johanna M. Graf, and Anna Kampschulte. 2012. “Creativity in the Opportunity Identification Process and the Moderating Effect of Diversity of Information.” Journal of Business Venturing 27 (5): 559–576. doi:10.1016/j.jbusvent.2011.10.003.
   Web of Science ®Google Scholar
• Harden, Luberta M. 1929. “A Quantitative Study of the Similarity Factor in Retroactive Inhibition.” Journal of General Psychology 2 (4): 421–432. doi:10.1080/00221309.1929.9918081.
   Google Scholar
• Hayek, Frederick A. 2009. “The Use of Knowledge in Society.” Knowledge Management and Organisational Design 35 (4): 7–15. doi:10.4324/9780080509839-7.
   Google Scholar
• Hennessey, Beth A. 1994. “The Consensual Assessment Technique: An Examination of the Relationship between Ratings of Product and Process Creativity.” Creativity Research Journal 7 (2): 193–208. doi:10.1080/10400419409534524.
   Web of Science ®Google Scholar
• Hu, Kailun, Shuo Jin, and Charlie C.L. Wang. 2015. “Support Slimming for Single Material Based Additive Manufacturing.” CAD Computer Aided Design 65: 1–10. doi:10.1016/j.cad.2015.03.001.
   Web of Science ®Google Scholar
• Jensen, Michael C., and William H. Heckling. 1995. “Specific and General Knowledge, and Organizational Structure.” Journal of Applied Corporate Finance 8 (2): 4–18. doi:10.1111/j.1745-6622.1995.tb00283.x.
   Google Scholar
• Karchmer, Michael A., and Eugene Winograd. 1971. “Effects of Studying a Subset of Familiar Items on Recall of the Remaining Items: The John Brown Effect.” Psychonomic Science 25 (4): 224–225. doi:10.3758/BF03329100.
   Google Scholar
• Kaufman, James C., and John Baer. 2012. “Beyond New and Appropriate: Who Decides What is Creative?” Creativity Research Journal 24 (1): 83–91. doi:10.1080/10400419.2012.649237.
   Web of Science ®Google Scholar
• Kaufman, James C., John Baer, David H. Cropley, Roni Reiter-Palmon, and Sarah Sinnett. 2013. “Furious Activity vs. Understanding: How Much Expertise is Needed to Evaluate Creative Work?” Psychology of Aesthetics, Creativity, and the Arts 7 (4): 332–340. doi:10.1037/a0034809.
   Web of Science ®Google Scholar
• Keppel, Geoffrey, and Benton J. Underwood. 1962. “Proactive Inhibition in Short-Term Retention of Single Items.” Journal of Verbal Learning and Verbal Behavior 1 (3): 153–161. doi:10.1016/S0022-5371(62)80023-1.
   Google Scholar
• Kuhn, J., M. Green, S. Bashyam, and C. C. Seepersad. 2014. “The Innovation Station: A 3D Printing Vending Machine for UT Austin Students.” In International Solid Freeform Fabrication Symposium, 1371–1385. http://sffsymposium.engr.utexas.edu/sites/default/files/2014-108-Kuhn.pdf.
   Google Scholar
• Laverne, Floriane, Frédéric Segonds, Nabil Anwer, and Marc Le Coq. 2015. “Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study.” Journal of Mechanical Design 137 (12): 121701. doi:10.1115/1.4031589.
   Web of Science ®Google Scholar
• Lei, Ningrong, Xiling Yao, Seung Ki Moon, and Guijun Bi. 2016. “An Additive Manufacturing Process Model for Product Family Design.” Journal of Engineering Design 27 (11): 751–767. doi:10.1080/09544828.2016.1228101.
   Web of Science ®Google Scholar
• Leutenecker-Twelsiek, Bastian, Julian Ferchow, Christoph Klahn, and Mirko Meboldt. 2017. “The Experience Transfer Model for New Technologies - Application on Design for Additive Manufacturing.” In Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications, Vol. 1. https://doi.org/10.1007/978-3-319-66866-6.
   Google Scholar
• Li, C., C. H. Fu, Y. B. Guo, and F. Z. Fang. 2015. “A Multiscale Modeling Approach for Fast Prediction of Part Distortion in Selective Laser Melting.” Journal of Materials Processing Technology 229: 703–712. doi:10.1016/j.jmatprotec.2015.10.022.
   Web of Science ®Google Scholar
• Linton, M. 1982. “Transformations of Memory in Everyday Life.” In Memory Observed: Remembering in Natural Contexts, edited by U. Neisser, 433. San Francisco: Freeman.
   Google Scholar
• Lockett, Helen, Jialuo Ding, Stewart Williams, and Filomeno Martina. 2017. “Design for Wire+Arc Additive Manufacture: Design Rules and Build Orientation Selection.” Journal of Engineering Design 28 (7–9): 568–598. doi:10.1080/09544828.2017.1365826.
   Web of Science ®Google Scholar
• Loess, Henry. 1964. “Proactive Inhibition in Short-Term Memory.” Journal of Verbal Learning and Verbal Behavior 3 (5): 362–368. doi:10.1016/S0022-5371(64)80003-7.
   Google Scholar
• Lopes, Amit Joe, Eric MacDonald, Ryan B. Wicker, Amit Joe Lopes, Eric MacDonald, and Ryan B. Wicker. 2012. “Integrating Stereolithography and Direct Print Technologies for 3D Structural Electronics Fabrication.” Rapid Prototyping Journal 18 (2): 129–143. doi:10.1108/13552541211212113.
   Web of Science ®Google Scholar
• Mann, H. B., and D. R. Whitney. 1947. “On a Test of Whether One of Two Random Variables is Stochastically Larger than the Other.” The Annals of Mathematical Statistics 18 (1): 50–60.
   Google Scholar
• McGeoch, John A. 1929. “The Influence of Degree of Learning upon Retroactive Inhibition.” The American Journal of Psychology 41 (2): 252. doi:10.2307/1415236.
   Google Scholar
• McGeoch, John A. 1932. “Forgetting and the Law of Disuse.” Psychological Review 39 (4): 352–370. doi:10.1037/h0069819.
   Google Scholar
• McGeoch, John A., and William T. McDonald. 1931. “Meaningful Relation and Retroactive Inhibition.” The American Journal of Psychology 43 (4): 579. doi:10.2307/1415159.
   Google Scholar
• Meisel, Nicholas, and Christopher Williams. 2015. “An Investigation of Key Design for Additive Manufacturing Constraints in Multimaterial Three-Dimensional Printing.” Journal of Mechanical Design 137 (11): 111406. doi:10.1115/1.4030991.
   Web of Science ®Google Scholar
• Mensink, Ger Jan, and Jeroen G.W. Raaijmakers. 1988. “A Model for Interference and Forgetting.” Psychological Review 95 (4): 434–455. doi:10.1037/0033-295X.95.4.434.
   Web of Science ®Google Scholar
• Mohammed, Mazher I., Angus P. Fitzpatrick, and Ian Gibson. 2017. “Customised Design of a Patient Specific 3D Printed Whole Mandible Implant.” KnE Engineering 2 (2): 104. doi:10.18502/keg.v2i2.602.
   Google Scholar
• Moylan, S., J. Slowinski, A. Cooke, K. Jurrens, and M. A. Donmez. 2012. “Proposal for a Standardized Test Artifact for Additive.” Proceedings of the 23th international solid freeform fabrication symposium, 902–920
   Google Scholar
• Murr, L. E., S. M. Gaytan, F. Medina, H. Lopez, E. Martinez, B. I. Machado, D. H. Hernandez, et al. 2010. “Next-Generation Biomedical Implants Using Additive Manufacturing of Complex, Cellular and Functional Mesh Arrays.” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 368 (1917): 1999–2032. doi:10.1098/rsta.2010.0010.
   PubMed Web of Science ®Google Scholar
• Nickerson, Raymond S. 1984. “Retrieval Inhibition from Part-Set Cuing: A Persisting Enigma in Memory Research.” Memory & Cognition 12 (6): 531–552. doi:10.3758/BF03213342.
   PubMed Web of Science ®Google Scholar
• Nuñez, P. J., A. Rivas, E. García-Plaza, E. Beamud, and A. Sanz-Lobera. 2015. “Dimensional and Surface Texture Characterization in Fused Deposition Modelling (FDM) with ABS Plus.” Procedia Engineering 132: 856–863. doi:10.1016/j.proeng.2015.12.570.
   Google Scholar
• Pahl, Gerhard, Wolfgang Beitz, Jörg Feldhusen, and Karl-Heinrich Grote. 2007. Engineering Design. London: Springer London. https://doi.org/10.1007/978-1-84628-319-2.
   Google Scholar
• Pallari, Jari H P, Kenneth W. Dalgarno, and James Woodburn. 2010. “Mass Customization of Foot Orthoses for Rheumatoid Arthritis Using Selective Laser Sintering.” IEEE Transactions on Biomedical Engineering 57 (7): 1750–1756. doi:10.1109/TBME.2010.2044178.
   PubMed Web of Science ®Google Scholar
• Pan, S. 1926. “The Influence of Context Upon Learning and Recall.” Journal of Experimental Psychology 9 (6): 468–491. doi:10.1037/h0073472.
   Google Scholar
• Poli, Corrado. 2001. Design for Manufacturing: A Structured Approach. Elsevier Science & Technology. ISBN:9780080503943.
   Google Scholar
• Prabhu, Rohan, Jennifer Bracken, Clinton B. Armstrong, Kathryn Jablokow, Timothy W. Simpson, and Nicholas A. Meisel. 2020. “Additive Creativity: Investigating the Use of Design for Additive Manufacturing to Encourage Creativity in the Engineering Design Industry.” International Journal of Design Creativity and Innovation 8 (4): 198–222. doi:10.1080/21650349.2020.1813633.
   Web of Science ®Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2018. “The Earlier the Better? Investigating the Importance of Timing on Effectiveness of Design for Additive Manufacturing Education.” In Volume 2A: 44th Design Automation Conference, 1–14. American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2018-85953.
   Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020a. “Complex Solutions for Complex Problems? Exploring the Role of Design Task Choice on Learning, Design for Additive Manufacturing Use, and Creativity.” Journal of Mechanical Design 142 (3). doi:10.1115/1.4045127.
   PubMed Web of Science ®Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020b. “Exploring the Effects of Additive Manufacturing Education on Students’ Engineering Design Process and Its Outcomes.” Journal of Mechanical Design 142 (4): 1. doi:10.1115/1.4044324.
   Web of Science ®Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020c. “Fresh in My Mind! Investigating the Effects of the Order of Presenting Opportunistic and Restrictive Design for Additive Manufacturing Content on Creativity.” In Volume 3: 17th International Conference on Design Education (DEC), 1–16. American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2020-22449.
   Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020d. “But Will It Build? Assessing Student Engineering Designers’ Use of Design for Additive Manufacturing Considerations in Design Outcomes.” Journal of Mechanical Design 142 (9): 1–56. doi:10.1115/1.4046071.
   Web of Science ®Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020e. “Teaching Design Freedom: Understanding the Effects of Variations in Design for Additive Manufacturing Education on Students’ Creativity.” Journal of Mechanical Design 142 (9): 1–27. doi:10.1115/1.4046065.
   Web of Science ®Google Scholar
• Prabhu, Rohan, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel. 2020f. “Built to Win? Exploring the Role of Competitive Environments on Students’ Creativity in Design for Additive Manufacturing Tasks.” Journal of Engineering Design 31 (11–12): 574–604. doi:10.1080/09544828.2020.1851661.
   Web of Science ®Google Scholar
• Pradel, Patrick, Zicheng Zhu, Richard Bibb, and James Moultrie. 2018a. “Investigation of Design for Additive Manufacturing in Professional Design Practice.” Journal of Engineering Design 29 (4–5): 165–200. doi:10.1080/09544828.2018.1454589.
   Web of Science ®Google Scholar
• Pradel, Patrick, Zicheng Zhu, Richard Bibb, and James Moultrie. 2018b. “A Framework for Mapping Design for Additive Manufacturing Knowledge for Industrial and Product Design.” Journal of Engineering Design 29 (6): 291–326. doi:10.1080/09544828.2018.1483011.
   Web of Science ®Google Scholar
• Renishaw Inc. 2017. “Digital Evolution of Cranial Surgery.” https://www.renishaw.com/en/digital-evolution-of-cranial-surgery–38602.
   Google Scholar
• Robinson, Edward S. 1920. “Studies from the Psychological Laboratory of the University of Chicago: Some Factors Determining the Degree of Retroactive Inhibition.” Psychological Monographs 28 (6): 1–57.
   Google Scholar
• Robinson, Edward S. 1927. “The ‘Similarity’ Factor in Retroaction.” The American Journal of Psychology 39 (1/4): 297. doi:10.2307/1415419.
   Google Scholar
• Robinson, Edward S., and Chester W. Darrow. 1924. “Effect of Length of List upon Memory for Numbers.” The American Journal of Psychology 35 (2): 235. doi:10.2307/1413826.
   Google Scholar
• Robinson, Edward S., and W. T. Heron. 1922. “Results of Variations in Length of Memorized Material.” Journal of Experimental Psychology 5 (6): 428–448. doi:10.1037/h0075024.
   Google Scholar
• Rosen, David W. 2007. “Computer-Aided Design for Additive Manufacturing of Cellular Structures.” Computer-Aided Design and Applications 4 (1–6): 585–594. doi:10.1080/16864360.2007.10738493.
   Google Scholar
• Schmelzle, John, Eric V. Kline, Corey J. Dickman, Edward W. Reutzel, Griffin Jones, and Timothy W. Simpson. 2015. “(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing.” Journal of Mechanical Design 137 (11): 111404. doi:10.1115/1.4031156.
   Web of Science ®Google Scholar
• Seepersad, C. C., J. Allison, and C. Sharpe. 2017. “The Need for Effective Design Guides in Additive Manufacturing.” Proceedings of the International Conference on Engineering Design, ICED, Vol. 5, 309–316. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85029790657&partnerID=40&md5=47e1f9dfba3dfef0f59b45bec8b54b35.
   Google Scholar
• Selvaraj, P., P. Radhakrishnan, and M. Adithan. 2009. “An Integrated Approach to Design for Manufacturing and Assembly Based on Reduction of Product Development Time and Cost.” The International Journal of Advanced Manufacturing Technology 42 (1–2): 13–29. doi:10.1007/s00170-008-1580-8.
   Web of Science ®Google Scholar
• Shapiro, Author S S, and M. B. Wilk. 1965. “An Analysis of Variance Test for Normality (Complete Samples).” Biometrika 52 (3): 591–611.
   Web of Science ®Google Scholar
• Simpson, Timothy W., Christopher B. Williams, and Michael Hripko. 2017. “Preparing Industry for Additive Manufacturing and its Applications: Summary & Recommendations from a National Science Foundation Workshop.” Additive Manufacturing 13: 166–178. doi:10.1016/j.addma.2016.08.002.
   Web of Science ®Google Scholar
• Smith, Howard. 2013. “3D Printing News and Trends: GE Aviation to Grow Better Fuel Nozzles Using 3D Printing.” 3D Printing News and Trends. http://3dprintingreviews.blogspot.co.uk/2013/06/ge-aviation-to-grow-better-fuel-nozzles.html.
   Google Scholar
• Strano, G., L. Hao, R. M. Everson, and K. E. Evans. 2013. “A New Approach to the Design and Optimisation of Support Structures in Additive Manufacturing.” The International Journal of Advanced Manufacturing Technology 66 (9–12): 1247–1254. doi:10.1007/s00170-012-4403-x.
   Web of Science ®Google Scholar
• “Submitting Your 3D Print | Maker Commons”. n.d. Accessed February 12, 2018. https://makercommons.psu.edu/submitting-your-3d-print/.
   Google Scholar
• Thorndike, Edward Lee. 1913. The Psychology of Learning. Educational Psychology, Vol. 2. New York: Teachers College, Columbia University.
   Google Scholar
• “Tips for Designing a 3D Printed Part | Innovation Station.” n.d. Accessed February 12, 2018. https://innovationstation.utexas.edu/tip-design/.
   Google Scholar
• Tuck, C. J., R. J. M. Hague, M. Ruffo, M. Ransley, and P. Adams. 2008. “Rapid Manufacturing Facilitated Customization.” International Journal of Computer Integrated Manufacturing 21 (3): 245–258. doi:10.1080/09511920701216238.
   Web of Science ®Google Scholar
• Tukey, John W. 1949. “Comparing Individual Means in the Analysis of Variance.” Biometrics 5 (2): 99–114. http://www.jstor.org/stable/3001913.
   PubMed Web of Science ®Google Scholar
• Tulving, Endel, and Zena Pearlstone. 1966. “Availability Versus Accessibility of Information in Memory for Words.” Journal of Verbal Learning and Verbal Behavior 5 (4): 381–391. doi:10.1016/S0022-5371(66)80048-8.
   Google Scholar
• Tversky, Amos, and Daniel Kahneman. 1973. “Availability: A Heuristic for Judging Frequency and Probability.” Cognitive Psychology 5 (2): 207–232. doi:10.1016/0010-0285(73)90033-9.
   Web of Science ®Google Scholar
• Tzeng, Ovid J.L. 1973. “Positive Recency Effect in a Delayed Free Recall.” Journal of Verbal Learning and Verbal Behavior 12 (4): 436–439. doi:10.1016/S0022-5371(73)80023-4.
   Google Scholar
• Umaras, Eduardo, and Marcos S.G. Tsuzuki. 2017. “Additive Manufacturing - Considerations on Geometric Accuracy and Factors of Influence.” IFAC-PapersOnLine 50 (1): 14940–14945. doi:10.1016/j.ifacol.2017.08.2545.
   Google Scholar
• Underwood, Benton J. 1945. “The Effect of Successive Interpolations on Retroactive and Proactive Inhibition.” Psychological Monographs 59 (3): i–33. doi:10.1037/h0093547.
   Google Scholar
• Underwood, Benton J. 1949. “Proactive Inhibition as a Function of Time and Degree of Prior Learning.” Journal of Experimental Psychology 39 (1): 24–34. doi:10.1037/h0059550.
   PubMedGoogle Scholar
• Underwood, Benton J. 1957. “Interference, and Forgetting.” Psychological Review 1 (64). doi:10.1016/0022-0965(64)90029-3.
   Google Scholar
• Vayre, B., F. Vignat, and F. Villeneuve. 2012. “Designing for Additive Manufacturing.” Procedia CIRP 3 (1): 632–637. doi:10.1016/j.procir.2012.07.108.
   Google Scholar
• Watkins, Olga C., and Michael J. Watkins. 1975. “Buildup of Proactive Inhibition as a Cue-Overload Effect.” Journal of Experimental Psychology: Human Learning and Memory 1 (4): 442–452. doi:10.1037/0278-7393.1.4.442.
   Google Scholar
• Whitely, P. L. 1927. “The Dependence of Learning and Recall Upon Prior Intellectual Activities.” Journal of Experimental Psychology 10 (6): 489–508. doi:10.1037/h0075186.
   Google Scholar
• Wicker, Ryan B., and Eric W. MacDonald. 2012. “Multi-Material, Multi-Technology Stereolithography: This Feature Article Covers a Decade of Research Into Tackling One of the Major Challenges of the Stereolithography Technique, Which is Including Multiple Materials in One Construct.” Virtual and Physical Prototyping 7 (3): 181–194. doi:10.1080/17452759.2012.721119.
   Google Scholar
• Wilcox, Rand R. 2011. Introduction to Robust Estimation and Hypothesis Testing. Waltham, MA: Academic Press.
   Google Scholar
• Wiley, Jennifer. 1998. “Expertise as Mental Set: The Effects of Domain Knowledge in Creative Problem Solving.” Memory and Cognition 26 (4): 716–730. doi:10.3758/BF03211392.
   PubMed Web of Science ®Google Scholar
• Yang, Sheng, and Yaoyao Fiona Zhao. 2015. “Additive Manufacturing-Enabled Design Theory and Methodology: A Critical Review.” The International Journal of Advanced Manufacturing Technology 80 (1–4): 327–342. doi:10.1007/s00170-015-6994-5.
   Web of Science ®Google Scholar
• Yonelinas, Andrew P. 2002. “The Nature of Recollection and Familiarity: A Review of 30 Years of Research.” Journal of Memory and Language 46 (3): 441–517. doi:10.1006/jmla.2002.2864.
   Web of Science ®Google Scholar
• Young, Robert K. 1955. “Retroactive and Proactive Effects Under Varying Conditions of Response Similarity.” Journal of Experimental Psychology 50 (2): 113–119. doi:10.1037/h0047382.
   PubMedGoogle Scholar
• Zhu, Zicheng, Vimal Dhokia, Aydin Nassehi, and Stephen T. Newman. 2016. “Investigation of Part Distortions as a Result of Hybrid Manufacturing.” Robotics and Computer-Integrated Manufacturing 37: 23–32. doi:10.1016/j.rcim.2015.06.001.
   Web of Science ®Google Scholar