References
- Price, P. E. and Kohler, S. E. Hot isostatic pressing of metal powders. In Metals Handbook, Vol. 7, Powder Metallurgy ASM, 9th Edn. (1984)
- Widmer, R. In Proc. 1st Int. Conf. Isostatic Pressing Loughborough University, UK (1978) pp 30–32
- Movchan, B. A. and Demchishin, A. V. F. Z. Metal. Metalloved 28 (4) (1969) pp 83–90
- Thornton, J. A. J. Vac. Sci. Technol. 11 (4) (1964) pp 666–670
- Downing, M., Nicholls, J. R. and Stephenson, D. J. Mater. Sci. Technol. (in press)
- Power, D., Nicholls, J. R. and Stephenson, D. J. (submitted to J. Mater. Sci.)
- Stevens, R. A. and Flewitt, P. E. J. Mater. Engng. 3 (1982) p 461
- Stevens, R. A. and Flewitt, P. E. J. Acta Metall. 27 (1979) p 67
- McLean, M. and Peck, M. S. National Physical Laboratory Rep. No. DMA(A) (October 1984)
- Ho, T. N. PhD Thesis, Cranfield Institute of Technology (1991)
- Chou, T. W., Kelly, A. and Okura, A. Fibre-reinforced metal-matrix composites. Composites 16 (3) (July 1985) pp 187–206
- Lynch, C. T. and Kershaw, J. P. Metal Matrix Composites Chemical Rubber Co. (1972)
- Mileiko, S. T. and Kelly, A. Handbook of Composites. Vol. 4, Fabrication of Composites Elsevier Science Publishers (1983)
- Gow, K. V. High temperature fibre-metal-matrix composites. Rev. High Temp. Mater. III (3) (1976) pp 153–229
- Bose, A. and German, R. M. Novel processing approaches to intermetallic matrix composites. Adv. Mater. Manuf. Processes 3 (1)(1988) pp 37–56
- Brindley, P. SiC reinforced aluminide composites. In Proc. Conf. High-Temperature Ordered Intermetallic Alloys. II. Boston, USA (December 1988) pp 419–424
- Bose, A., Moore, B., Germany, R. M. and Stoloff, N. S. Elemental powder approaches to Ni3Al matrix composites. J. Metals (September 1988) pp 14–17
- Brewer, W. D. and Unnam, J. Interfacial control and mechanical property improvements in silicon carbide/titanium composites. NASA-TP-2066 (August 1982)
- Nicholls, J. R., Lawson, K. J., Chester, G., Al-Yasiri, L. H. and Hancock, P. In European Research on Material Substitution (Ed. I. V. Mitchell and H. Nosbuch) Elsevier, London (1988) pp 295–307
- Smith, P. R. and Froes, F. H. J. Metals (March 1984) p 19
- Kieschke, R., Somekh, R. and Cline, T. W. Composite Materials EECM3 (20–23 March 1989) Bordeaux, France, pp 265–272
- Larikov, L. N., Geichenko, V. V. and Fal'chenk, V. M. Diffusion Processes in Ordered Alloys Published for US National Bureau of Standards by Oxonian Press Prt. Ltd., New Delhi (1981)
- Ovcharenko, V. E., Kashin, O. A., Dudarev, E. F., Lapsker, I. A. and Turovets, L. A. Reinforcement of nickel with carbide coated carbon fibres Sov. Powder Metall. Met. Ceram. 18 (10) (1979) pp 713–715
- Zabolotskii, A. A., Salibekov, S. E., Kantsevich, I. A., Ignatova, N. P. and Chernyak, A. I. Reaction between carbon fibres and nickel through a zirconium nitride of titanium carbide diffusion barrier. Sov. Powder Metall. Met. Ceram. 16 (7) (1977) pp 519–521
- Samsonov, G. V., Panasyuk, A. D., Bespyatyi, V. A., Belomyl'Tsev, A. I. and D'Yakonova, L. V. Protective coatings for SiC fibres in contact with nickel alloys. Sov. Powder Metall. Met. Ceram. 14 (3) (1975) pp 213–215
- Cornie, J. A., Cook, C. S. and Anderson, C. A. Fabrication process development of SiC superalloy composite sheet for exhaust system components. NASA-CR-134958 (1976)
- Mazzei, P. J., Van Drunen, G. and Chung, N. High temperature artificial composite alloys for industrial gas turbines. In Proc. Failure Modes in Composites IV Symp. Chicago, USA (1977)
- Meham, R. L., Jackson, M. R. and McConnell, M. D. J. Mater. Sci. 18 (1983) pp 3195–3205
- Meham, R. L. and Jackson, M. R. Ceram. Eng. Sci. Proc. 1 (1982) pp 484–503
- Karpinos, D. M., Listovnichaya, S. P., Dzeganovskii, V. P. and Balakhnina, V. N. Use of silicon carbide fibres with protective alumina coatings in composites based on a nickel-chromium alloy. Sov. Powder Metall. Met. Ceram. 16 (6) (1977) pp 434–439
- Pearce, R. (Ed.) Proc. Int. Conf. Diffusion Bonding Cranfield, UK (1987)
- Stephenson, D. J. (Ed.) Proc. 2nd Int. Conf Diffusion Bonding Cranfield, UK, Elsevier Applied Science, London (1991)
- Dunkerton, S. B. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D. J. Stephenson) Cranfield, UK, Elsevier Applied Science, London (1991)
- Yasemides, G. P. In Proc. Int. Conf. Diffusion Bonding (Ed. R. Pearce) Cranfield, UK (1987) pp 259–268
- Stephenson, D. J. and Downing, M. Materials at High Temperatures 9 (2) (1991) pp 59–68 (this issue)
- Celis, P. B. and Ishizaki, K. Materials at High Temperatures 9 (2) (1991) pp 80–91 (this issue)
- Gray, G. and Savage, G. M. Materials at High Temperatures 9 (2) (1991) pp 102–109 (this issue)
- Henshall, G. A., Kassner, M. E. and Rosen, R. S. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D. J. Stephenson) Cranfield, UK. Elsevier Applied Science, London (1991) pp 13–24
- Ricks, R. A., Mahon, G. J., Parsons, N. G., Heinrich, T. and Winkler, P. J. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D. J. Stephenson) Cranfield, UK Elsevier Applied Science, London (1991) pp 69–82
- Livesey, D. W. and Ridley, N. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D. J. Stephenson) Cranfield, UK. Elsevier Applied Science, London (1991) pp 83–100
- Tensi, H. M. and Wittmann, M. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D. J. Stephenson) Cranfield, UK, Elsevier Applied Science, London (1991) pp 101–110
- Walker, R. M., Roberts, D. J. and Rickinson, B. A. In Proc. 2nd Int. Conf. Diffusion Bonding (Ed. D.J. Stephenson) Cranfield. UK Elsevier Applied Science, London (1991) pp 261–269
- Suganuma, K., Okamoto, T., Shimada, M. and Koizumi, M. High Temperature Sci. 20 (1985) pp 127–139