Determination of creep behaviour of Ti60 alloy by small punch creep test

References

• Tettamanti S, Crudeli R. Small punch creep test: a promising methodology for high temperature plant components life evaluation. BALTICA IV Plant Maint Manag Life Perform. 1998;2:501–509.
   Google Scholar
• Komazai S-I, Hashida T, Shoji T, et al. Development of small punch tests for creep property measurement of tungsten-alloyed 9% Cr ferritic steels. J Test Eval. 2000;28:249–256.
   Google Scholar
• Izaki T, Kobayashi T, Kusumoto J, et al. A creep life assessment method for boiler pipes using small punch creep test. Int J Press Vessels Pip. 2009;86:637–642.10.1016/j.ijpvp.2009.04.005
   Google Scholar
• Baik J-M, Buck O, Kameda J. Small punch test evaluation of intergranular embrittlement of an alloy steel. Scr Metall (United States). 1983;17(12):1443–1447.
   Google Scholar
• Yang Z, Wang Z-W. Relationship between strain and central deflection in small punch creep specimens. Int J Press Vessels Pip. 2003;80:397–404.10.1016/S0308-0161(03)00069-3
   Google Scholar
• Komazaki S-I, Kato T, Kohno Y, et al. Creep property measurements of welded joint of reduced-activation ferritic steel by the small-punch creep test. Mater Sci Eng A. 2009;510–511:229–233.10.1016/j.msea.2008.04.132
   Google Scholar
• Blagoeva D, Li Y, Hurst R. Qualification of P91 welds through small punch creep testing. J Nucl Mater. 2011;409:124–130.10.1016/j.jnucmat.2010.09.015
   Google Scholar
• Ling X, Zheng Y-Y, You Y-J, et al. Experimental study and numerical simulation of creep damage of small punch creep test specimen of SS304 stainless steel. J Aeronaut Mater. 2005;25(6):18–23.
   Google Scholar
• Andrés D, Lacalle R, Álvarez JA. Creep property evaluation of light alloys by means of the small punch test: creep master curves. Mater Des. 2016;96:122–130.10.1016/j.matdes.2016.02.023
   Google Scholar
• Deshmukh GS, Prasad ML, Peshwe DR, et al. Creep properties assessment of P92 steel by small punch creep tests. Trans Indian Inst Met. 2016;69:907–915.10.1007/s12666-015-0579-8
   Google Scholar
• Lee T, Ibupoto FA, Lee JH, et al. A direct methodology for small punch creep test. Exp Mech. 2016;56:395–405.10.1007/s11340-015-0108-z
   Google Scholar
• Reis AGD, Reis DAP, de Moura Neto CDM, et al. Creep behavior and surface characterization of a laser surface nitrided Ti–6Al–4V alloy. Mater Sci Eng A. 2013;577:48–53.10.1016/j.msea.2013.04.042
   Google Scholar
• Liu D, Zhang SQ, Li A, et al. Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite. Mater Des. 2010;31:3127–3133.10.1016/j.matdes.2009.12.036
   Google Scholar
• Esposito L, Bonora N. Time-independent formulation for creep damage modeling in metals based on void and crack evolution. Mater Sci Eng A. 2009;510–511:207–213.10.1016/j.msea.2008.06.052
   Google Scholar
• Ule B, Sturm R, Leskovšek V. Effects of test specimen geometry on creep behaviour of 12Cr steel in miniaturised disc bend tests. Mater Sci Technol. 2003;19:1771–1776.10.1179/026708303225009463
   Google Scholar
• Yang S, Zhou J, Ling X, et al. Effect of geometric factors and processing parameters on plastic damage of SUS304 stainless steel by small punch test. Mater Des. 2012;41:447–452.
   Google Scholar
• Jia W, Zeng W, Zhou Y, et al. High-temperature deformation behavior of Ti60 titanium alloy. Mater Sci Eng A. 2011;528:4068–4074.10.1016/j.msea.2011.01.113
   Google Scholar
• Agreement CW. CWA 15627: 2006 E, “small punch test method for metallic materials”, PART A: a code of practice for small punch creep testing. Brussels: CEN; 2006.
   Google Scholar
• Shou-yong W, Wei-min S, Ding-chun W, et al. Microstructure and mechanical properties of high temperature titanium alloy Ti60 at 600 °C. Chin J Nonferrous Met. 2010;20:801–806.
   Google Scholar
• Liang ZHAO, Jianrong LIU, Qingjiang WANG, et al. Effect of precipitates on the high temperature creep and creep rupture properties of Ti60 alloy. Chin J Mater Res. 2009;23:1–5.
   Google Scholar
• Lancaster RJ, Harrison WJ, Norton G. An analysis of small punch creep behaviour in the γ titanium aluminide Ti–45Al–2Mn–2Nb. Mater Sci Eng A. 2015;626:263–274.10.1016/j.msea.2014.12.045
   Google Scholar
• Hou F, Xu H, Wang Y, et al. Determination of creep property of 1.25Cr0.5Mo pearlitic steels by small punch test. Eng Fail Anal. 2013;28:215–221.10.1016/j.engfailanal.2012.10.004
   Google Scholar
• Blagoeva DT, Hurst RC. Application of the CEN (European Committee for Standardization) small punch creep testing code of practice to a representative repair welded P91 pipe. Mater Sci Eng A. 2009;510–511:219–223.10.1016/j.msea.2008.05.058
   Google Scholar
• Gülçimen B, Hähner P. Determination of creep properties of a P91 weldment by small punch testing and a new evaluation approach. Mater Sci Eng A. 2013;588:125–131.
   Google Scholar
• Hyde TH, Stoyanov M, Sun W, et al. On the interpretation of results from small punch creep tests. J Strain Anal Eng Des Prof. 2010;10:141–164.10.1243/03093247JSA592
   Google Scholar