Advanced search
Publication Cover
Energy Materials
Materials Science and Engineering for Energy Systems
Volume 13, 2018 - Issue 1
Journal homepage
285
Views
0
CrossRef citations to date
0
Altmetric
Original Research Paper

Influence of precipitated phases on properties during prolonged aging in TP347H steel at 700 °C

W. WangElectric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou, China
,
Z. W. WangSchool of Power and Engineering, Wuhan University, Wuhan, ChinaCorrespondence[email protected]
,
W. S. LiElectric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou, China
,
J. TianSchool of Power and Engineering, Wuhan University, Wuhan, China
,
W. L. ZhongElectric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou, China
&
J. D. LinElectric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou, China
Pages 149-156 | Received 11 May 2015, Accepted 11 Aug 2015, Published online: 13 Feb 2017

References

  • Yu HY, Chi CY, Dong JX, et al. 650 °C long-term structure stability study on 18Cr10NiNb heat-resistant steel. Adv Mater Res. 2012;399–401:180–184.
  • Sawaragi Y, Otsuka N. ‘Development of a new 18-8 austenitic steel tube (ST3Cu) with high elevated temperature strength for fossil fired boilers’, (ed. O. Kazuhiro et al.). Sumitomo Met. 1991;43(6):24–31.
  • Zhou HW, He YZ, Cui M. ‘Dependence of dynamic strain aging on strain amplitudes during the low-cycle fatigue of TP347H austenitic stainless steel at 550 °C’, (ed. C. Mian et al.). Int J Fatigue. 2013;56:1–7.10.1016/j.ijfatigue.2013.07.010
  • Tohyama A, Hayakawa H, Minami Y. Development of high strength steel boiler tube (TEMPALOY AA-1). NKK Tech Rev. 2001;84:30–35.
  • Kaneko K, Fukunaga T. ‘Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel’, (ed. K. Yamada et al.). Scr Mater. 2011;65(6):509–512.10.1016/j.scriptamat.2011.06.010
  • Bai X, Pan J, Chen G, et al. Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel. Mater Sci Technol. 2014;30(2):205–210.10.1179/1743284713Y.0000000347
  • Bhambroo R, Roychowdhury S. ‘Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainless steel’, (ed. K. Vivekanand et al.). Mater Sci Eng A. 2013;568:127–133.10.1016/j.msea.2013.01.011
  • Garcia EG, Sanchez MA, Romo MAR. ‘Electrochemical extraction technique and SEM study of precipitated carbides at grain boundaries in austenitic stainless steel’, (ed. M. Palomar-Pardavé et al.). ECS Trans. 2013;47(1):149–156.10.1149/04701.0149ecst

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.