Oxidation of Ni-based single crystal after grit-blasting during exposure at high temperature

References

• Zhang B, Tao CH, Lu X, et al. Recrystallization of single crystal nickel-based superalloy. J Iron Steel Res Int. 2009;16:75–79.10.1016/S1006-706X(10)60031-3
   Google Scholar
• Sato A, Chiu YL, Reed RC. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications. Acta Mater. 2011;59:225–240.10.1016/j.actamat.2010.09.027
   Google Scholar
• Kawagishi K, Harada H, Sato A, et al. The oxidation properties of fourth generation single-crystal nickel-based superalloys. JOM. 2006;58:43–46.10.1007/s11837-006-0067-z
   Google Scholar
• Xiong DS, Wan Y, Lin JM, et al. Tribological property and high temperature oxidation behavior of Ni-based alloy. Trans Nonferrous Met Soc China. 2005;15:162–166.
   Google Scholar
• Shi ZX, Li JR, Liu SZ. Isothermal oxidation behavior of single crystal superalloy DD6. Trans Nonferrous Met Soc China. 2012;22:534–538.10.1016/S1003-6326(11)61210-7
   Google Scholar
• Raffaitin A, Monceau D, Andrieu E. Cyclic oxidation of coated and uncoated single-crystal nickel-based superalloy MC2 analyzed by continuous thermogravimetry analysis. Acta Mater. 2006;54:4473–4487.10.1016/j.actamat.2006.05.034
   Google Scholar
• Zhou X, Xu ZH, Mu RD, et al. Thermal barrier coatings with a double-layer bond coat on Ni3Al based single-crystal superalloy. J Alloys Compd. 2013;591:41–51.
   Google Scholar
• Khan AN, Lu J, Liao H. Effect of residual stresses on air plasma sprayed thermal barrier coatings. Surf Coat Tech. 2003;168:291–299.10.1016/S0257-8972(03)00207-X
   Google Scholar
• Chander KP, Vashista M, Sabiruddin K, et al. Effects of grit blasting on surface properties of steel substrates. Mater Design. 2009;30:2895–2902.10.1016/j.matdes.2009.01.014
   Google Scholar
• Gariepy A, Larose S, Perron C, et al. Shot peening and peen forming finite element modeling – towards a quantitative method. Int J Solids Struct. 2011;48:2859–2877.10.1016/j.ijsolstr.2011.06.003
   Google Scholar
• Meng J, Jin T, Sun XF, et al. Effect of surface recrystallization on the creep rupture properties of a nickel-base single crystal superalloy. Mater Sci Eng A. 2010;527:6119–6122.10.1016/j.msea.2010.04.071
   Google Scholar
• Chen MH, Shen ML, Zhu SL, et al. Effect of sand blasting and glass matrix composite coating on oxidation resistance of a nickel-based superalloy at 1000 °C. Corros Sci. 2013;73:331–341.10.1016/j.corsci.2013.04.022
   Google Scholar
• Choi H, Yoon B, Kim H, et al. Isothermal oxidation of air plasma spray NiCrAlY bond coatings. Surf Coat Tech. 2002;150:297–308.10.1016/S0257-8972(01)01557-2
   Google Scholar
• Liu CT, Ma J, Sun XF. Oxidation behavior of a single-crystal Ni-base superalloy between 900 and 1000 °C in air. J Alloys Compd. 2010;491:522–526.10.1016/j.jallcom.2009.10.261
   Google Scholar
• Pint BA, Distefano JR, Wright IG. Oxidation resistance: one barrier to moving beyond Ni-base superalloys. Mater Sci Eng A. 2006;415:255–263.10.1016/j.msea.2005.09.091
   Google Scholar
• Wang YQ, Suneson M. Oxidation behavior of Hf-modified aluminide coatings on Haynes-188 at 1050 °C. Surf Coat Tech. 2013;215:7–15.10.1016/j.surfcoat.2012.07.091
   Google Scholar
• Wu MY, Chen MH, Zhu SL, et al. Effect of sand blasting on oxidation behavior of K38G superalloy at 1000 °C. Corros Sci. 2015;92:256–262.10.1016/j.corsci.2014.12.015
   Google Scholar
• Wang JL, Chen MH, Zhu SL, et al. Ta effect on oxidation of a nickel-based single-crystal superalloy and its sputtered nanocrystalline coating at 900–1100 °C. Appl Surf Sci. 2015;345:194–203.10.1016/j.apsusc.2015.03.157
   Google Scholar
• Park SJ, Seo SM, Yoo YS, et al. Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys. Corros Sci. 2015;90:305–312.10.1016/j.corsci.2014.10.025
   Google Scholar
• Mellali M, Grimaud A, Leger AC, et al. Alumina grit blasting parameters for surface preparation in the plasma spraying operation. J Therm Spray Tech. 1997;6:217–227.
   Google Scholar
• Bagherifard S, Ghelichi R, Guagliano M. A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material. Surf Coat Tech. 2010;204:4081–4090.10.1016/j.surfcoat.2010.05.035
   Google Scholar
• Hong T, Ooi JY, Shaw B. A numerical simulation to relate the shot peening parameters to the induced residual stresses. Eng Fail Anal. 2008;15:1097–1110.10.1016/j.engfailanal.2007.11.017
   Google Scholar
• Frija M, Hassine T, Fathallah R, et al. Finite element modeling of shot peening process: prediction of the compressive residual stresses, the plastic deformations and the surface integrity. Mater Sci Eng A. 2006;426:173–180.10.1016/j.msea.2006.03.097
   Google Scholar
• Mylonas GI, Labeas G. Numerical modeling of shot peening process and corresponding products: residual stress, surface roughness and cold work prediction. Surf Coat Tech. 2011;205:4480–4494.10.1016/j.surfcoat.2011.03.080
   Google Scholar
• Daway CR, Thomas H, Gerald RP. Chemical diffusion increases thermal expansion gradients enhancing compressive stress cracking at the TGO interface. Mater Lett. 2012;78:8–10.
   Google Scholar
• Pu S, Zhang J, Shen YF, et al. Recrystallization in a directionally solidified cobalt-base superalloy. Mater Sci Eng A. 2008;480:428–433.10.1016/j.msea.2007.07.028
   Google Scholar