An evaluation of the capability of data conversion of impression creep test

References

• Rolls-Royce Power Engineering Plc, Scoop Sampling – Extraction of Material Samples for Examination and Analysis. 2010.
   Google Scholar
• Brett SJ. Small scale sampling and impression creep testing of aged ½CrMoV steam pipework systems. In: Proceeding of ECCC Confernce on Creep and Fracture in High Temperature Components – Design and Life Assessment; Apr; Dübendorf, Switzerland; 2009. p. 1088–1096.
   Google Scholar
• Klevtsov I, Dedov A. Impact of small specimens sampling on durability of in-service power plant components. In: SSTT Proceedings of the 2nd International Conference SSTT: Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques; Oct 2–4; Ostrava, Czech Rep; 2012.
   Google Scholar
• GB/T 29459.1-2012. Small Punch Test Methods of Metallic Materials for In-Service Pressure Equipment-Part 1: General Requirements. General Administration of Quality Supervision, Inspection and Quarantine of China/ Standardization Administration of China, 2012.
   Google Scholar
• GB/T 29459.1-2012. Small Punch Test Methods of Metallic Materials for In-Service Pressure Equipment-Part 2: Method of Test For Tensile Properties at Room Temperature. General Administration of Quality Supervision, Inspection and Quarantine of China/ Standardization Administration of China, 2012.
   Google Scholar
• CEN WORKSHOP AGREEMENT. Small Punch Test Method for Metallic Materials, CWA 15627: 2007, D/E/F. European Committee for Standardisation, Dec 2007.
   Google Scholar
• Hyde TH, Sun W, Williams JA. Requirements for and use of miniature test specimens to provide mechanical and creep properties of materials: a review. Int Mater Rev. 2007;52(4):213–255.
   Web of Science ®Google Scholar
• Dobeš F, Milička K. Application of creep small punch testing in assessment of creep lifetime. Mater Sci Eng A Prop Microstruct Process. 2009;510(11):440–443.
   Web of Science ®Google Scholar
• Hyde TH, Sun W. A novel, high-sensitivity, small specimen creep test. J Strain Anal Eng Des. 2009;44(3):171–185.
   Web of Science ®Google Scholar
• Dymáček P, Milička K. Creep small-punch testing and its numerical simulations. Mater Sci Eng A. 2009;510–511:444–449.
   Web of Science ®Google Scholar
• Hyde TH, Stoyanov M, Sun W, Hyde CJ. On the interpretation of results from small punch creep tests. J Strain Anal Eng Des. 2010;45(3):141–164.
   Web of Science ®Google Scholar
• Hyde CJ, Hyde TH, Sun W, Nardone S, De Bruycker E. Small ring testing of a creep resistant material. Mater Sci Eng A. 2013;586:358–366.
   Web of Science ®Google Scholar
• Hyde TH, Sun W, Becker AA. Analysis of the impression creep test method using a rectangular indenter for determining the creep properties in welds. Int J Mech Sci. 1996;38:1089–1102.
   Web of Science ®Google Scholar
• Sun W, Hyde TH, Brett SJ. Application of impression creep data in life assessment of power plant materials at high temperatures. Proc Instn Mech Engrs J Mater Des Appl. 2008;222(Part L):175–182.
   Google Scholar
• Cacciapuoti B, Sun W, McCartney DG. A study on the evolution of the contact angle of small punch creep test of ductile materials. Int J Press Vessels Pip. 2016;145:60–74.
   Web of Science ®Google Scholar
• Sun W, Hyde TH, Brett SJ. Small specimen creep testing and application for power plant component remainig life assessment. In: IRF2013 – 4th International Conference on Integrity, Reliability and Failure; Funchal, Portugal; 2013.
   Google Scholar
• Hyde TH, Sun W. Evaluation of conversion relationships for impression creep test at elevated temperatures. Int J Press Vessels Pip. 2009;86(11):757–763.
   Web of Science ®Google Scholar
• Sun W, Hyde TH, Brett SJ. use of the impression creep test method for determining minimum creep strain rate data. In: Matocha K, Hurst R, Sun W, editors. SSTT – Determination of mechanical properties of materials by small punch and other miniature testing techniques. Ostrava (CZ): OCELOT s.r.o.; 2012.
   Google Scholar
• Brett S, Kuhn B, Rantala J, et al. Impression creep testing for material characterization in development and application. In: 10th Liège Conference on Materials for Advanced Power Engineering; September 14–17; Palais des Congrès Liège, Belgium; 2014.
   Google Scholar
• Monkman FC, Grant NJ. An empirical relationship between rupture life and minimum creep rate in creep-rupture tests. Proc ASTM. 1956;56:593–605.
   Google Scholar
• Hyde TH, Ali BSM, Sun W. On the Determination of Material Creep Constants Using Miniature Creep Test Specimens. Journal of Engineering Materials and Technology. 2014;136:021006–021010.
   Web of Science ®Google Scholar
• Mackenzie AC. On the use of a single uniaxial test to estimate deformation rates in some structures undergoing creep. Int J Mech Sci. 1968;10(5):441–453.
   Web of Science ®Google Scholar
• Penny RK, Marriott DL. Design for creep. 2nd ed. London: Chapman and Hall; 1995.
   Google Scholar
• Hyde TH, Sun W. Multi-step load impression creep tests for a 1/2Cr1/2Mo1/4V steel at 565 °C. Strain. 2001;37(3):99–103.
   Web of Science ®Google Scholar
• Hyde TH, Yehia KA, Becker AA. Interpretation of impression creep data using a reference stress approach. Int J Mech Sci. 1993;35(6):451–462.
   Web of Science ®Google Scholar
• Vijayanand VD, Ganesan V, Laha K, et al. Evaluation of the effect of nitrogen on creep properties of 316LN stainless steel from impression creep tests. Mater Sci Eng A. 2012;552:112–118.
   Web of Science ®Google Scholar
• Cortellino F. Experimental and numerical investigation of small punch creep test [ PhD thesis]. Nottingham: The Univeristy of Nottingham; 2015.
   Google Scholar