References
- Woodford DA . Evolution of a modern mechanical testing and design standard for high temperature materials. Mater Res Innov. 2016;20:379–389.10.1080/14328917.2016.1141086
- Woodford DA . Intrinsic ductility for structural materials as a function of stress and temperature. Mater High Temp. 2017;34:134–139.10.1080/09603409.2016.1258153
- Woodford DA . Comparison of creep strength and intrinsic ductility for serviced and reheat treated T91 steel based on stress relaxation testing. Mater High Temp. 2017;34:140–148.10.1080/09603409.2016.1272836
- Hart EW . A phenomenological theory for plastic deformation of polycrystalline metals. Acta Met. 1970;18:599–610.10.1016/0001-6160(70)90089-1
- Ludwick P . Elemente der Technologischen Mechanik. Berlin; Julius Springer; 1909.10.1007/978-3-662-40293-1
- Zener CZ , Hollomon JH . Problems in non-elastic deformation of metals. J Appl Phys. 1946;17:69–82.10.1063/1.1707696
- Dorn JE . Some fundamental experiments on high temperature creep. J Mech Phys Solids. 1955;3(2):85–116.10.1016/0022-5096(55)90054-5
- Hart EW , Solomon HD . Load relaxation studies of polycrystalline high purity aluminum. Acta Metall. 1973;21:295–307.
- Woodford DA . Strain rate sensitivity as a measure of ductility. Trans ASM. 1969;69:291–293.
- Nichols FA . Plastic instabilities and uniaxial tensile ductilities. Acta Met. 1980;28:663–673.10.1016/0001-6160(80)90144-3
- Woodford DA . Gas phase embrittlement and time dependent cracking of nickel based superalloys. Energy Mater. 2006;1:59–79.10.1179/174892306X99679
- Steven RA , Flewitt PEJ . Microstructural changes which occur during isochronal heat treatment of the nickel-base superalloy IN-738. J Mater Sci. 1978;13:367–376.10.1007/BF00647782
- Koul AK , Immarigeon J-P, Castillo R, et al. Rejuvenation of service-exposed IN738 turbine blades. Superalloys 1988. In: Reichman S , et al. , editors. The Metallurgical Society; 1988. p. 755.
- Kitaguchi H . Microstructure–property relationship in advanced Ni-based superalloys. In: Pardhi Y , editor. Chapter 2. Metallurgy-advances in materials and processes; 2012. DOI:10.5772/2852.
- Data Sheets on the elevated temperature properties of nickel-based 16Cr–8.5Co–3.5Al–3.5Ti–2.6W–1.8Mo–0.9Nb superalloy casting for gas turbine components. NIMS Creep Data Sheet 2012, No. 49A, Ibaraki, (Japan): National Institute for Materials Science.
- McCartney LN . No time – gentlemen please!. Philos Mag. 1976;33(4):689–695. 10.1080/14786437608221129
- Woodford DA . Creep damage and the remaining life concept. J Eng Mater Technol. 1979;101:311–316.10.1115/1.3443695
- Woodford DA . Creep analysis of directionally solidified GTD111 based on stress relaxation testing. Mater High Temp. 1997;14(4):413–420.10.1080/09603409.1997.11689567