An assessment of mechanical properties of P92 steel weld joint and simulated heat affected zones by ball indentation technique

References

• Mathew MD , Murty KL , Rao KBS , et al . Ball indentation studies on the effect of aging on mechanical behavior of alloy 625. Mater Sci Eng A. 1999;264:159–166.10.1016/S0921-5093(98)01098-3
   Web of Science ®Google Scholar
• Murty KL , Mathew MD , Wang Y , et al . Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel. Int J Pres Ves Pip. 1998;75:831–840.10.1016/S0308-0161(98)00093-3
   Web of Science ®Google Scholar
• Mathew MD , Murty KL . J Mater Sci. Non-destructive studies on tensile and fracture properties of molybdenum at low temperatures (148 to 423 K). 1999;34:1497–1503.10.1023/A:1004547709783
   Web of Science ®Google Scholar
• Naveena MDM , Ganeshkumar J . Characterisation of mechanical properties of materials using innovative smallsSpecimen testing methods. Trans Ind Inst Met. 2016 [24 March]: (1–17).
   Google Scholar
• Murty KL , Mathew MD . Nondestructive monitoring of structural materials using automated ball indentation (ABI) technique. Nucl Eng Des. 2004;228:81–96.10.1016/j.nucengdes.2003.06.006
   Web of Science ®Google Scholar
• Barbadikar DR , Ballal AR , Peshwe DR , et al . Investigation on mechanical properties of P92 steel using ball indentation technique. Mater Sci Eng A. 2015;624:92–101.
   Web of Science ®Google Scholar
• Barbadikar DR , Ballal AR , Peshwe DR , et al . Finite element analysis of deformation due to ball indentation and evaluation of tensile properties of tempered P92 steel. Mater Sci Eng A. 2015;46(8):3448–3459.
   Google Scholar
• Miraglia PQ . Characterization of mechanical and fracture properties of a reactor pressure vessel steel weldment using automated ball indentation [thesis masters of science]. 1997.
   Google Scholar
• Murty KL , Miraglia PQ , Mathew MD , et al . Characterization of gradients in mechanical properties of SA-533B steel welds using ball indentation. Int J Pres Ves Pip. 1999;76:361–369.10.1016/S0308-0161(99)00006-X
   Web of Science ®Google Scholar
• Das G , Das M , Sinha S , et al . Characterization of cast stainless steel weld pools by using ball indentation technique. Mater Sci Eng A. 2009;513–514:389–393.
   Web of Science ®Google Scholar
• Chung K-H , Lee W , Kim JH , et al . Characterization of mechanical properties by indentation tests and FE analysis – validation by application to a weld zone of DP590 steel. Int J Solids Struct. 2009;46:344–363.
   Web of Science ®Google Scholar
• Haggag FM , editor. Application of flow properties microprobe to evaluate gradients in weldment properties. Proceedings of the 3rd International Conference on Trends in Welding Research; June 1–5; Gatlinburg, TN; 1992. p. 629–635.
   Google Scholar
• Pamnani R , Karthik V , Jayakumar T , et al . Evaluation of mechanical properties across micro alloyed HSLA steel weld joints using Automated Ball Indentation. Mater Sci Eng A. 2016;651:214–223.10.1016/j.msea.2015.10.104
   Web of Science ®Google Scholar
• Ennis PJ , Czyrska-Filemonowicz A .  Recent advances in creep-resistant steels for power plant applications. Sadhana. 2003;28:709–730.10.1007/BF02706455
   Web of Science ®Google Scholar
• Lundin CD , Liu P , Cui Y . A literature review on characteristics of high temperature ferritic Cr-Mo steels and weldments. A WRC Bulletin. 2000;454:1–36.
   Google Scholar
• Wang SS , Peng DL , Chang L , et al . Enhanced mechanical properties induced by refined heat treatment for 9Cr-0.5Mo-1.8W martensitic heat resistant steel. Mater Des. 2013;50:174–180.10.1016/j.matdes.2013.01.072
   Web of Science ®Google Scholar
• Maruyama K , Sawada K , Koike J-i . Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int. 2001;41(6):641–653.10.2355/isijinternational.41.641
   Web of Science ®Google Scholar
• Shen YZ , Kim SH , Han CH , et al . TEM investigations of MN nitride phases in a 9% chromium ferritic/martensitic steel with normalization conditions for nuclear reactors. J Nucl Mater. 2009;384:48–55.10.1016/j.jnucmat.2008.10.005
   Web of Science ®Google Scholar
• Klueh RL . Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors. Int Mater Rev. 2005;50:287–310.10.1179/174328005X41140
   Web of Science ®Google Scholar
• Giroux PF , Dalle F , Sauzay M , et al . Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. Mater Sci Eng A. 2010;527:3984–3993.10.1016/j.msea.2010.03.001
   Web of Science ®Google Scholar
• Ennis PJ , Zielinska-Lipiec A , Wachter O , et al . Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant. Acta mater. 1997;45(12):4901–4907.10.1016/S1359-6454(97)00176-6
   Web of Science ®Google Scholar
• Chandravathi KS , Laha K , Parameswaran P , et al . Effect of microstructure on the critical strain to onset of serrated flow in modified 9Cr–1Mo steel. Int J Pres Ves Pip. 2012;89:162–169.10.1016/j.ijpvp.2011.10.021
   Web of Science ®Google Scholar
• Sakthivel T , Vasudevan M , Laha K , et al . Creep rupture behavior of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92) ferritic steel weld joint. Mater Sci Eng A. 2014;591:111–120.
   Web of Science ®Google Scholar