Accelerated material data generation for viscoplastic material models based on complex LCF and incremental creep tests

References

• Fraser N, Blaxill H, Lumsden G, et al. Challenges for increased efficiency through gasoline engine downsizing. SAE Int J Eng. 2009;2(2009-01-1053):991–1008.10.4271/2009-01-105310.1016/j.msea.2009.04.020
   Google Scholar
• Taleb L, Cailletaud G, Saï K. Experimental and numerical analysis about the cyclic behaviour of the 304L and 316L stainless steels at 350 C. Int J Plasticity. 2014;61:32–48.10.1016/j.ijplas.2014.05.006
   Google Scholar
• Chaboche JL. A review of some plasticity and viscoplasticity constitutive theories. Int J Plasticity. 2008;24(10):1642–1693.10.1016/j.ijplas.2008.03.009
   Google Scholar
• Park SH, et al. Development of a heat resistant cast iron alloy for engine exhaust manifolds. No. 2005-01-1688. SAE Technical Paper; 2005.
   Google Scholar
• Elliot R. Cast iron technology. London: Butterworth-Heinemann; 1988.
   Google Scholar
• Boyce MP. Gas turbine engineering handbook. London: Elsevier; 2011.
   Google Scholar
• Hug E, Keller C, Favergeon J, et al. Application of the Monkman–Grant law to the creep fracture of nodular cast irons with various matrix compositions and structures. Mater Sci Eng. 2009;518(1):65–75.
   Google Scholar
• Campbell JD, Ferguson WG. The temperature and strain-rate dependence of the shear strength of mild steel. Philos Mag. 1970;21(169):63–82.
   Google Scholar
• ASTM. E8/E8 M, 2013a, standard test methods for tension testing of metallic materials. West Conshohocken (PA): ASTM International. doi:10.1520/E0008_E0008M 2013.
   Google Scholar
• ASTM. E606/E606 M–12, Standard test method for strain-controlled fatigue testing. West Conshohocken (PA): ASTM international, Book of Standards 3; 2012.
   Google Scholar
• Zafrany M, Peyrade JP, Voillot F, et al. Incremental creep testing: application to the plasticity of InP between 0.31 and 0.77 Tm. Acta Metall Mater. 1991;39(10):61–2372.
   Google Scholar
• Achereiner F, Engelsing K, Bastian M, et al. Accelerated creep testing of polymers using the stepped isothermal method. Polym Test. 2013;32(3):447–454.10.1016/j.polymertesting.2013.01.014
   Google Scholar
• Hadid M, Guerira B, Bahri M, et al. Assessment of the stepped isostress method in the prediction of long term creep of thermoplastics. Polym Test. 2014;34:113–119.10.1016/j.polymertesting.2014.01.003
   Google Scholar
• Krempl E. An experimental study of room-temperature rate-sensitivity, creep and relaxation of AISI type 304 stainless steel. J Mech Phys Solids. 1979;27(5–6):363–375.10.1016/0022-5096(79)90020-6
   Google Scholar
• Chan KS, et al. Constitutive modelling for isotropic materials (HOST). 1988.
   Google Scholar
• Heine B. Werkstoffprüfung: Ermittlung von Werkstoffeigenschaften, 2. München: Aufl. Fachbuchverlag Leipzig im Carl Hanser Verlag; 2011.10.3139/9783446428294
   Google Scholar
• Seifert T, Riedel H. Mechanism-based thermomechanical fatigue life prediction of cast iron. Part I: models. Int J Fatigue. 2010;32(8):1358–1367.10.1016/j.ijfatigue.2010.02.004
   Google Scholar
• Seifert T. Ein komplexes LCF-Versuchsprogramm zur schnellen und günstigen Werkstoffparameteridentifizierung. Proc. of Werkstoffprüfung; 2006.
   Google Scholar
• Szmytka F, Rémy L, Maitournam H, et al. New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron. Int J Plasticity 2010;26(6):905–924.
   Google Scholar
• Holländer D, Kulawinski D, Weidner A, et al. Small-scale specimen testing for fatigue life assessment of service-exposed industrial gas turbine blades. Int J Fatigue. 2016;92:262–271.10.1016/j.ijfatigue.2016.07.014
   Google Scholar
• Holländer D, Kulawinski D, Thiele M, et al. Investigation of isothermal and thermo-mechanical fatigue behavior of the nickel- base superalloy IN738LC using standardized and advanced test methods. Mater Sci Eng. 2016;670:314–324.10.1016/j.msea.2016.05.114
   Google Scholar
• Mahabunphachai S, Koç M. Investigation of size effects on material behaviour of thin sheet metals using hydraulic bulge testing at micro/meso-scales. Int J Mach Tools Manuf. 2008;49(9):1014–1029.10.1016/j.ijmachtools.2008.01.006
   Google Scholar
• ASTM. E139-06, “Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials”. West Conshohocken (PA): ASTM international, Book of Standards 3; 2012.
   Google Scholar
• Cadek J. Creep in metallic materials. 1988.
   Google Scholar
• Naumenko K. Modeling of high-temperature creep for structural analysis applications.” Habilitationschrift, Mathematisch-Naturwissenschaftlich-Technische Fakultät, Martin-Luther- Universität Halle-Wittenberg. 2006;16:17–63.
   Google Scholar
• Bürgel R, Maier HJ, Niendorf T. Handbuch Hochtemperatur-Werkstofftechnik. Wiesbaden: Friedrich Vieweg & Sohn Verlag; 2011.10.1007/978-3-8348-9907-1
   Google Scholar
• Brown AM, Ashby MF. On the power-law creep equation. Scr Metall. 1980;14(12):1297–1302.10.1016/0036-9748(80)90182-9
   Google Scholar
• Sommitsch C, Sievert R, Wlanis T, et al. Modelling of creep-fatigue in containers during aluminium and copper extrusion. Comput Mater Sci. 2007;39(1):55–64.10.1016/j.commatsci.2006.03.024
   Google Scholar
• Fedelich B, Klingelhöffer H, Skrotzki B. Versagensabschätzung Thermomechanisch Belasteter Heissteile in Turboladern. MTZ-Motortechnische Zeitschrift. 2010;76(6):444–450.
   Google Scholar
• Thiele M, Weser S, Gampe U, et al. Advancement of experimental methods and cailletaud material model for life rediction of gas turbine blades exposed to combined cycle fatigue. ASME Turbo Expo. 2012;2012:119–130.
   Google Scholar
• Ohno N, Wang J-D. Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behaviour. Int J Plasticity. 1993;9(3):375–390.10.1016/0749-6419(93)90042-O
   Google Scholar
• Frederick CO, Armstrong PJ. A mathematical representation of the multiaxial Bauschinger effect. Mater High Temp. 2007;24(1):1–26.10.3184/096034007X207589
   Google Scholar
• Abdel-Karim M. An extension for the Ohno-Wang kinematic hardening rules to incorporate isotropic hardening. Int J Press Vessels Pip. 2010;87(4):170–176.10.1016/j.ijpvp.2010.02.003
   Google Scholar
• ZeBuLoN. 2012. Available from: https://www.nwnumerics.com
   Google Scholar
• Frost HJ, Ashby MF. Deformation mechanism maps: the plasticity and creep of metals and ceramics. Oxford: Pergamon press; 1982.
   Google Scholar
• Woodford DA. Stress relaxation testing of service exposed IN738 for creep strength evaluation. J Eng Gas Turbine Power. 2000;441–456.
   Google Scholar
• Woodford DA. Advances in the use of stress relaxation data for design and life assessment in combustion Turbine. JSME. 2002;98–103.
   Google Scholar
• Fox A, editor. Stress relaxation testing. Vol. 676. ASTM International; 1979.10.1520/STP676-EB
   Google Scholar
• Seifert T, Maier G, Uihlein A, et al. Mechanism-based thermomechanical fatigue life prediction of cast iron. Part II: Comparison of model predictions with experiments. Int J Fatigue. 2010;32(8):1368–1377.10.1016/j.ijfatigue.2010.02.005
   Google Scholar