References
- Burnett TL, Kelley R, Winiarski B, et al. Large volume serial section tomography by Xe Plasma FIB dual beam microscopy. Ultramicroscopy. 2016;161:119–129.10.1016/j.ultramic.2015.11.001
- Holzer L, Cantoni M. Review of FIB-tomography. In: Utke I, Moshkalev S, editors. Nanofabrication using focussed ion and electron beams: principles and applications. New York: Oxford University Press; 2012. p. 410–435.
- Groeber MA, Haley BK, Uchic MD, et al. 3D reconstruction and characterization of polycrystalline microstructures using a FIB–SEM system. Mater Character. 2006;57:259–273.10.1016/j.matchar.2006.01.019
- Möbus G, Inkson BJ. Nanoscale tomography in materials science. Mater Today. 2007;10(12):18–25.10.1016/S1369-7021(07)70304-8
- Mangipudi KR, Radisch V, Holzer L, et al. A FIB-nanotomography method for accurate 3D reconstruction of open nanoporous structures. Ultramicroscopy. 2016;163:38–47.10.1016/j.ultramic.2016.01.004
- Vivet N, Chupin S, Estrade E, et al. 3D microstructural characterization of a solid oxide fuel cell anode reconstructed by focused ion beam tomography. J Power Sources. 2011;196:7541–7549.10.1016/j.jpowsour.2011.03.060
- Mogire EO, Higginson RL, Fry AT, et al. Microstructural characterization of oxide scales formed on steels P91 and P92. Mater High Temp. 2011;28:361–368.10.3184/096034011X13193830650089
- Wright IG, Dooley RB. A review of the oxidation behaviour of structural alloys in steam. Int Mater Rev. 2010;55:129–167.10.1179/095066010X12646898728165
- Chapman L, Fry AT, Roberts S. Thermal diffusivity and thermal conductivity measurements on oxide scales. Teddington: National Physical Laboratory; 2005. ( NPL Report DEPC MPE 018).
- Fry AT, Roberts S, Chapman L. Measuring heat transfer through steam grown oxide scales. Teddington: National Physical Laboratory; 2007. ( NPL Measurement Note DEPC-MN 043).
- Lee NH, Kim S, Choe BH, et al. Failure analysis of a boiler tube in USC coal power plant. Eng Fail Anal. 2009;16:2031–2035.10.1016/j.engfailanal.2008.12.006
- ISO 21608:2015. Corrosion of metal and alloys – test method for isothermal exposure oxidation testing under high temperature corrosion conditions for metallic materials. Geneva: International Organisation of Standardisation; 2015.
- Armitt J, Holmes R, Manning MI, et al. The spalling of steam-grown oxide from superheater and reheater tube steels: final report. Leatherhead: Electric Power Reseach Institute; 1978.
- A213/A213 M-15b. Standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes 1. West Conshohocken (PA): ASTM International; 2015.
- Griess J, Maxwell W. Long-term oxidation of selected alloys in superheated steam at 482 and 538°C. Oak Ridge (TN): Oak Ridge National Laboratory; 1981.
- Ehlers J, Young D, Smaardijk E, et al. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments. Corros Sci. 2006;48:3428–3454.10.1016/j.corsci.2006.02.002
- Gorman DM, Fry AT. Porosity connectivity within the spinel layer of 9Cr steel grade 91 when exposed to high-temperature steam. Oxid Met. 2016;87(284):1–12.
- Gorman DM, Fry AT. The early morphological development of the near surface region of pickled grade 91 tubing exposed to steam and its long term implication. Metals. 2016;6(62):1–16.
- Shutze M, Schorr M, Renusch D, et al. The role of alloy composition, environment and stresses for the oxidation resistance of modern 9%Cr steels for fossil power stations. Mater Res. 2004;7:11–123.