Stress and crack propagation in the surface layer of carburized stable austenitic alloys during cooling

References

• Kubicki J , Christodulu P . The stability of chromium-nickel steel under condition of carburising treatment and thermal shock, Conference Materials IX Symp Nauk z okazji Dnia Odlewnika, ITiMO AGH, Kraków 1983, part. 1, 93–99 (in Polish).
   Google Scholar
• Piekarski B. Creep-resistant castings used in heat treatment furnaces. Szczecin: Wydawnictwo Uczelniane Zachodniopomorskiego Uniwersytetu Technologicznego; 2012. Polish.
   Google Scholar
• Piekarski B . A thermal fatigue behavior of creep-resistant Ni-Cr cast steel. Arch Foundry Eng. 2007;7(4):155–158.
   Google Scholar
• Bajwoluk A , Gutowski P . Thermal stresses in the wall connections of cast grate structures. Arch Foundry Eng. 2016;16(4):11–16.
   Web of Science ®Google Scholar
• Bajwoluk A , Gutowski P . The effect of pallet component geometry on temperature gradient during cooling. Arch Foundry Eng. 2015;15(1):5–8.
   Web of Science ®Google Scholar
• Gutowski P . Analysis of cracking causes in grates used in carburising furnaces [ dissertion]. Szczecin: Politechnika Szczecińska; 1989. Polish.
   Google Scholar
• Gutowski P , Kubicki J . Determination of tessellated stresses in stable multiphase casting alloys under cyclic temperature changes. Soldification Met Alloys. 1992;16:97–102.
   Google Scholar
• Gutowski P , Tuleja J . The effort analysis of fracture propagation in stable austenitic casting alloy under rapid changes of temperature. Archiwum Technologii Maszyn i Automatyzacji. 2006;25(1):25–37. Polish.
   Google Scholar
• Schnaas A . Veränderung der Eigenschaften hochwarm fester Stahle durch Aufkohlung und Karbidensscheidungen [Change in the properties of high-temperature steels due to carburizing and carbide precipitations] [ dissertion]. Düsseldorf: Max-Planck Institute; 1977.
   Google Scholar
• Herda W , Rickard AJ . Recent developments in materials for high-temperature service in petrochemical process and refinery furnaces. Metallurgist Mater Technol. 1973;7:342–350.
   Google Scholar
• Yamasaki D , Hirata I . Study of the carburizing phenomenon of heat-resisting cast steels for pyrolysis tubes. Techn Rev. 1977;14:294–301.
   Google Scholar
• Steinkusch W . Aufkohlung von Schleudergussrohren in der petrochemischen Industrie und Erklärung dieses Verhaltens im Temperaturbereich von 800-1150°C [Carburizing of centrifugal cast iron pipes in the petrochemical industry and explanation of this phenomena in the temperature range of 800-1150 ° C], Werkst. Korros. 1977;28:1–6.10.1002/(ISSN)1521-4176
   Google Scholar
• Bojarski Z , Barcik J , Wala A . Causes of pyrolitic tubes degeneration. Ochrona przed Korozją. 1983;4:86–90. Polish.
   Google Scholar
• Kupka M , Wala A . The effect of carburizing on some physical properties of cast steel used for manufacturing reforming and pyrolitic tubes. Ochrona przed korozją. 1979;6:148–151. in Polish.
   Google Scholar
• Lo KH , Shek CH , Lai J KL . Recent developments in stainless steels. Mater Sci Eng: R: Rep. 2009;65:39–104.10.1016/j.mser.2009.03.001
   Web of Science ®Google Scholar
• Jasiński W , Piekarski B . SEM observations of precipitates in stabilised creep resistant cast steel. Arch Foundry. 2001;1(1):155–160. Polish.
   Google Scholar
• Schnaas A , Grabke HJ . High-temperature corrosion and creep of Ni-Cr-Fe alloys in carburizing and oxidizing environments. Oxid Met. 1978;12(5):387–404.10.1007/BF00612086
   Web of Science ®Google Scholar
• Ridhwan J , Hamzah E , Selamat MZ , et al. Effect of cooling rate on the microstructures and hardness Of Fe-Ni-Cr superalloy. J Mech Eng Technol. 2013;5(1):45–57.
   Google Scholar
• Ul-Hamid A , Tawancy HM , Al-Jaroudi SS . et al. Carburisation of Fe–Ni–Cr alloys at high temperatures. Mater Sci-Poland. 2006;24(2/1):319–331.
   Web of Science ®Google Scholar
• Holdsworth S . Creep-fatigue failure diagnosis. Materials. 2015;8:7757–7769.10.3390/ma8115418
   PubMed Web of Science ®Google Scholar
• Norm EN 10295 . 2002. Heat resistant steel castings.
   Google Scholar
• Church BC , Sanders TH , Speyer RF , et al. Thermal expansion matching and oxidation resistance of Fe–Ni–Cr interconnect alloys. Mater Sci Eng A. 2007;452–453:334–340.10.1016/j.msea.2006.10.149
   Web of Science ®Google Scholar
• Schutze M . Protective oxide scales and their breakdown. In: Holmes DR , editor. Institute of Corrosion, John Wiley & Sons, 1997.
   Google Scholar
• Huntz AM . Stresses in NiO, Cr2O3, and A2O3, oxide scales. Mater Sci Eng A. 1995;201:211–228.10.1016/0921-5093(94)09747-X
   Web of Science ®Google Scholar
• Richard CS , Lu J , Béranger G , et al. Study of Cr203 coatings part I: microstructures and modulus. J Therm Spray Technol. 1995;4(4):342–346.10.1007/BF02648633
   Web of Science ®Google Scholar
• Xiaolu P , Kewei G , Volinsky AA . Microstructure and mechanical properties of chromium oxide coatings. J Mater Res. 2007;22(12):3531–3537.
   Web of Science ®Google Scholar
• Ji AL , Wang. W , Song GH . et al. Microstructures and mechanical properties of chromium oxide films by arc ion plating. Mater Lett. 2004;58:1993–1998.10.1016/j.matlet.2003.12.029
   Web of Science ®Google Scholar
• Barshilia HC , Rajam KS . Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering. Appl Surf Sci. 2008;255:2925–2931.
   Web of Science ®Google Scholar
• Gaillac R , Pullumbi P , Coudert FX . ELATE: an open-source online application for analysis and visualization of elastic tensors. J Phy: Condens Matter. 2016;28(27):275201.
   PubMed Web of Science ®Google Scholar
• Basu SN , Yurek GJ . Effect of alloy grain size and silicon content on the oxidation of austenitic Fe-Cr-Ni-Mn-Si alloys in pure 02 . Oxid Met. 1991;36(3–4):281–315.10.1007/BF00662967
   Web of Science ®Google Scholar