Effect of alkaline activator ratio on the compressive strength response of POFA-EACC mortar subjected to elevated temperature

References

• Rubaratuka IA. Investigation of provisions of fire safety measures in buildings in Dar Es Salaam. Int J Eng Appl Sci. 2013 4(4)
   Google Scholar
• Morsy MS, Alsayed SH, Aqel M. Effect of elevated temperature on mechanical properties and microstructure of silica flour concrete–semantic scholar. Int J Civil Environ Eng. 2010.
   Google Scholar
• Alonso C, Fernandez L. Dehydration and rehydration processes of cement paste exposed to high temperature environments. J Mater Sci. 2004;39(9):3015–3024.
   Web of Science ®Google Scholar
• Debicki G, Haniche R, Delhomme F. An experimental method for assessing the spalling sensitivity of concrete mixture submitted to high temperature. Cem Concr Compos. 2012;34(8):958–963.
   Web of Science ®Google Scholar
• Donatello S, Kuenzel C, Palomo A, et al. High temperature resistance of a very high volume fly ash cement paste. Cem Concr Compos. 2014;45:234–242.
   Web of Science ®Google Scholar
• Greepala V, Nimityongskul P. Structural integrity of ferrocement panels exposed to fire. Cem Concr Compos. 2008;30(5):419–430.
   Web of Science ®Google Scholar
• Messina F, Colangelo R. Alkali activated waste fly ash as sustainable composite: influence of curing and pozzolanic admixtures on the early-age physico-mechanical properties and residual strength after exposure at elevated temperature. Compos B Eng. 2018;132:161–169.
   Web of Science ®Google Scholar
• Rashad AM, Ouda AS. An investigation on alkali-activated fly ash pastes modified with quartz powder subjected to elevated temperatures. Constr Build Mater. 2016;122:417–425.
   Web of Science ®Google Scholar
• Junaid MT, Khennane A, Kayali O, et al. Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures. Cem Concr Res. 2014;60:24–29.
   Web of Science ®Google Scholar
• Hosan A, Haque S, Shaikh F. Compressive behaviour of sodium and potassium activators synthetized fly ash geopolymer at elevated temperatures: a comparative study. J Build Eng. 2016;8: 123–130.
   Web of Science ®Google Scholar
• Pan Z, Sanjayan JG, Rangan BV. An investigation of the mechanisms for strength gain or loss of geopolymer mortar after exposure to elevated temperature. J Mater Sci. 2009;44(7):1873–1880.
   Web of Science ®Google Scholar
• Rivera OG, Long WR, Weiss Jr. CA. Effect of elevated temperature on alkali-activated geopolymeric binders compared to Portland cement-based binders. Cem Concr Res. 2016;90:43–51.
   Web of Science ®Google Scholar
• Abdel-Ghani NT, Elsayed HA, AbdelMoied S. Geopolymer synthesis by the alkali-activation of blastfurnace steel slag and its fire-resistance. HBRC J. 2016.
   Google Scholar
• Valencia Saavedra WG, Mejía De Gutiérrez R. Performance of geopolymer concrete composed of fly ash after exposure to elevated temperatures. Constr Build Mater. 2017;154:229–235.
   Web of Science ®Google Scholar
• Zhang H, Kodur V, Cao L, et al. Fiber reinforced geopolymers for fire resistance applications. 2013 Int Conf Perform Based Fire Fire Prot Eng Wuhan ICPFFPE 2013. 2014;71:153–158.
   Google Scholar
• Shaikh FUA, Hosan A. Mechanical properties of steel fibre reinforced geopolymer concretes at elevated temperatures. Constr Build Mater. 2016;114:15–28.
   Web of Science ®Google Scholar
• Li T, Zhang Y, Dai J-G. Flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels exposed to elevated temperatures. Constr Build Mater. 2017;152:651–660.
   Web of Science ®Google Scholar
• Behera P, Baheti V, Militky J, et al. Microstructure and mechanical properties of carbon microfiber reinforced geopolymers at elevated temperatures. Constr Build Mater. 2018;160:733–743.
   Web of Science ®Google Scholar
• Zhang YJ, Li S, Wang YC, et al. Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature. J Non-Cryst Solids. 2012;358(3):620–624.
   Web of Science ®Google Scholar
• Fan M, Naughton A, Bregulla J. 14 - Fire performance of natural fibre composites in construction. In: Advanced high strength natural fibre composites in construction. Woodhead Publishing; 2017. p. 375–404.
   Google Scholar
• Duxson P, Lukey GC, Van Deventer JSJ. Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C. J Mater Sci. 2007;42(9):3044–3054.
   Web of Science ®Google Scholar
• Van Jaarsveld JGS, Van Deventer JSJ, Schwartzman A. The potential use of geopolymeric materials to immobilise toxic metals: part II. Material and leaching characteristics. Miner Eng. 1999;12(1):75–91.
   Web of Science ®Google Scholar
• Chandara C, Sakai E, Azizli KAM, et al. The effect of unburned carbon in palm oil fuel ash on fluidity of cement pastes containing superplasticizer. Constr Build Mater. 2010;24(9):1590–1593.
   Web of Science ®Google Scholar
• Li VC, Wu C, Wang S, et al. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC). Mater J. 2002;99(5):463–472.
   Web of Science ®Google Scholar
• Tsuchiya Y, Sumi K. Thermal decomposition products of poly(vinyl alcohol). J Polym Sci. 1969;7(11):3151–3158.
   Google Scholar
• Tubs RK, Ting K. Thermal properties of polyvinyl alcohol. In: Finch CA, editor. Polyvinyl alcohol – properties and applications. London: John Wliley & Sons; 1973.
   Google Scholar
• Gilman JW, VanderHart DL, Kashiwagi T. Thermal decomposition chemistry of poly(vinyl alcohol). In: Fire and polymers II. Vol. 599. American Chemical Society; 1995. p. 161–185.
   Google Scholar
• Sung C, Kim S, Min J, et al. Engineering properties of permeable polymer concrete using stone dust and heavy calcium carbonate. Presented at the Proceeding of the second East Asia symposium on polymers in concrete (II EASPIC), College of Engineering; Nihon University; Koriyama; 1997:95–104.
   Google Scholar
• Kong DLY, Sanjayan JG. Damage behavior of geopolymer composites exposed to elevated temperatures. Cem Concr Compos. 2008;30(10):986–991.
   Web of Science ®Google Scholar
• Neville AM. Properties of concrete: fourth and final edition. 4 ed. New York: Wiley; 1996.
   Google Scholar
• Abdulkareem OA, Mustafa AM. Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete. Constr Build Mater. 2014;50:377–387.
   Web of Science ®Google Scholar
• Nath P, Sarker PK. Fracture properties of geopolymer concrete cured in ambient temperature. New Devel Struct Eng Constr. 2013; 1061–1066.
   Google Scholar
• Ismail M, ElGelany Ismail M, Muhammad B. Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash. Constr Build Mater. 2011;25(5):2358–2364.
   Web of Science ®Google Scholar
• Magalhães MS, Filho T, Dias R, et al. Durability under thermal loads of polyvinyl alcohol fibers. Matér Rio. 2013;18(4):1587–1595.
   Google Scholar
• Li M, Qian C, Sun W. Mechanical properties of high-strength concrete after fire. Cem Concr Res. 2004;34(6):1001–1005.
   Web of Science ®Google Scholar
• Davidovits J. Geopolymer chemistry and applications. Institut Géopolymère: Saint-Quentin; 2008.
   Google Scholar
• Foletto EL, Castoldi MM, Oliveira LH, et al. Conversion of rice husk ash into zeolitic materials. Lat Am Appl Res. 2009;39(1):75–78.
   Web of Science ®Google Scholar
• Lloyd R. Accelerated ageing of geopolymers. Geopolymers Struct Process Prop Ind Appl. 2009; 139–166.
   Google Scholar