References
- Donachie MJ, and Donachie SJ. Superalloys: a technical guide. Materials Park, Ohio, USA: ASM international; 2002.
- Lippold JC, Kiser SD, and DuPont JN. Welding metallurgy and weldability of nickel-base alloys. Hoboken, New Jersey: John Wiley & Sons; 2011.
- Vorob’ev VM. Nature and causes of high temperature fracture in cast nickel-base heat-resistant alloys. Metallovedenie i Termicheskaya Obrabotka Metallov (Russia). 1992;34(3–4):237.
- Khakzadshahandashti A, Rahimipour MR, Shirvani K, et al. Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding. International Journal of Minerals, Metallurgy, and Materials. 2019;26(2):251
- Węglowski MS, Błacha S, Phillips A. Electron beam welding–techniques and trends–review. Vacuum. 2016;130:72.
- Agilan M, Venkateswaran T, Sivakumar D, et al. Effect of heat input on microstructure and mechanical properties of inconel-718 EB Welds. Procedia Mater Sci. 2014;5:656.
- Montazeri M, Malek Ghaini F, Ojo OA. Heat input and the liquation cracking of laser welded IN738LC superalloy. Weld. J. 2013;92(9):258.
- Rush MT, Colegrove PA, Zhang Z, et al. Liquation and post-weld heat treatment cracking in Rene 80 laser repair welds. J Mater Process Technol. 2012;212(1):188.
- Goldak JA, and Akhlaghi M. Computational welding mechanics. New York, USA: Springer Science & Business Media; 2006.
- Rykalin NN. Calculation of heat processes in welding. 1960.
- Luo Y, You G, Ye H, et al. Simulation on welding thermal effect of AZ61 magnesium alloy based on three-dimensional modeling of vacuum electron beam welding heat source. Vacuum. 2010;84(7):890.
- Rajabi L, Ghoreishi M. Heat source modeling and study on the effect of thickness on residual stress distribution in electron beam welding. Journal of Welding and Joining. 2016;35(1):49
- Luo Y, Liu J, Ye H. An analytical model and tomographic calculation of vacuum electron beam welding heat source. Vacuum. 2010;84(6):857.
- Chiumenti M, Cervera M, Dialami N, et al. Numerical modeling of the electron beam welding and its experimental validation. Finite Elem Anal Des. 2016;121:118.
- Huang J. The characterisation and modelling of porosity formation in electron beam welded titanium alloys. [Dissertation], University of Birmingham, 2012.
- Liu CC, He JS. Numerical analysis of thermal fluid transport behavior during electron beam welding of 2219 aluminum alloy plate. Trans Nonferrous Met Soc China. 2017;27(6):1319.
- Huang B, Chen X, Pang S, et al. A three-dimensional model of coupling dynamics of keyhole and weld pool during electron beam welding. Int J Heat Mass Transfer. 2017;115:159.
- Ferro P, Zambon A, Bonollo F. Investigation of electron-beam welding in wrought Inconel 706—experimental and numerical analysis. Mater Sci Eng A. 2005;392(1–2):94.
- Liu C, Wu B, Zhang JX. Numerical investigation of residual stress in thick titanium alloy plate joined with electron beam welding. Metall Mat Trans B. 2010;41(5):1129.
- Brent AD, Voller VR, Reid KTJ. Enthalpy-porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal. Numerical Heat Transfer, Part A Applications. 1998;13(3):297.
- Rai R, Burgardt P, Milewski JO, et al. Heat transfer and fluid flow during electron beam welding of 21Cr–6Ni–9Mn steel and Ti–6Al–4V alloy. J Phys D Appl Phys. 2008;42(2):025503.
- Idowu OA, Ojo OA, Chaturvedi MC. Effect of heat input on heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy. Mater Sci Eng A. 2007;454-455:389.
- Min D, Shen J, Lai S, et al. Effects of heat input on the low power Nd: YAG pulse laser conduction weldability of magnesium alloy AZ61. Opt Lasers Eng. 2011;49(1):89–96.