Influence of deposit formation on corrosion at the high-temperature superheater of eucalyptus-fired boiler

References

• Li J, Brzdekiewicz A, Yang W, et al. Co-firing based on biomass torrefaction in a pulverized coal boiler with AIM of 100% fuel switching[J]. Appl Energy. 2012;99(11):344–354.
   Google Scholar
• Li L, Yu C, Huang F, et al. Study on the deposits derived from a biomass circulating fluidized-bed boiler[J]. Energy & Fuels. 2012;26(9):6008–6014
   Google Scholar
• National Development and Reform Comission. Mid-long term development plan for renewable energy[J]. Renewable Energy Resources. 2007; 25: 1–5
   Google Scholar
• Cai Y, Tay K, Zheng Z, et al. Modeling of ash formation and deposition processes in coal and biomass fired boilers: a comprehensive review[J]. Appl Energy. 2018;230:1447–1544.
   Web of Science ®Google Scholar
• Suzuki A. Brief overview of woody biomass co-firing in Saijyo coal-fired power plant[J]. Electr Rev. 2005;90-12:74–77.
   Google Scholar
• Kabir MR, Kumar A. Comparison of the energy and environmental performances of nine biomass/coal co-firing pathways[J]. Bioresour Technol. 2012;124:394–405.
   PubMed Web of Science ®Google Scholar
• Glarborg P, Marshall P. Mechanism and modeling of the formation of gaseous alkali sulfates[J]. Combust Flame. 2005;141(1–2):22–39. Niu Y, Tan H, Ma L, et al. Slagging characteristics on the superheaters of a 12 MW biomass-fired boiler[J]. Energy Fuels, 2010,24(9):5222–5227. 10.1021/ef1008055.
   Web of Science ®Google Scholar
• Sandberg J, Karlsson C, Fdhila RB. A 7 year long measurement period investigating the correlation of corrosion, deposit and fuel in a biomass fired circulated fluidized bed boiler. Appl Energy. 2011;88(1):99–110.
   Web of Science ®Google Scholar
• Lone A, Hansen HP, Frandsen FJ. Influence of deposit formation on corrosion at a straw-fired boiler[J]. Fuel Process Technol. 2000;64:189–209.
   Web of Science ®Google Scholar
• Ots A. Mechanism of ash deposit formation, corrosion and sulphur capture by burning calcium and chlorine containing fuels[J]. VGB Power Tech. 2001;81:114–120.
   Google Scholar
• Aho M, Silvennoinen J. Preventing chlorine deposits on heat transfer surfaces with aluminium-silicon rich biomass residue and additive[J]. Fuel. 2005;83:1299–1305.
   Web of Science ®Google Scholar
• Skrifvars B-J, Backman R, Hupa M. Corrosion of superheater steel materials under alkali salt deposits[J]. Corros Sci. 2008;50:1274–1282.
   Web of Science ®Google Scholar
• Fanhua M, Tianhua Y. Research progress of alkali metal migration and transformation during biomass combustion[J]. Renew Energy Resour. 2010;28(5):111–114.
   Google Scholar
• Niu Y, Du W, Tan H, et al. Further study on biomass ash characteristics at elevated ashing temperatures: the evolution of K, Cl, S and the ash fusion characteristics[J]. Bioresour Technol. 2013;129:642–645.
   PubMed Web of Science ®Google Scholar
• Agata M-M, Klaudiusz G. The influence of KCl on biomass ash melting behaviour and high-temperature corrosion of low-alloy steel[J]. Energy. 2019; 188 :116062.
   Web of Science ®Google Scholar
• SC O, Montgomery M, FJ F. High temperature corrosion under laboratory conditions simulating biomass-firing: a comprehensive characterization of corrosion products[J]. Energy Fuel. 2014; 28:6447–6458.
   Web of Science ®Google Scholar
• Jm J, Jg J, FJ F. Release of K, Cl, and S during pyrolysis and combustion of high-chlorine biomass[J]. 2011;Energy Fuel. 25:4961–4971.
   Web of Science ®Google Scholar
• Magdziarz A, Gajek M, Nowak-Wozny D. Mineral phase transformation of biomass ashes e experimental and thermochemical calculations[J]. Renew Energy. 2018;128:446–459.
   Web of Science ®Google Scholar
• Capablo J. Formation of alkali salt deposits in biomass combustion[J]. Fuel Process Technol. 2016;153:58–73.
   Web of Science ®Google Scholar
• Mlonka-Me˛drala A, Magdziarz A, Kalemba-Rec I, et al. The influence of potassium-rich biomass ashes on steel corrosion above 550°C[J]. Energy Convers Manag. 2019;187:15–28.
   Web of Science ®Google Scholar
• Jonsson T, Folkeson N, JE S, et al. An ESEM in situ investigation of initial stages of the KCl induced high temperature corrosion of a Fe–2.25Cr–1Mo steel at 400 °C[J]. Corros Sci. 2011;53:2233–2246.
   Web of Science ®Google Scholar
• Kiamehr S, Tn L, TL C, et al. High temperature corrosion due to biomass firing: a study on the reactivity between potassium chloride and oxides[J]. Int Sympos High-Temperat Oxidat Corros 2014, The Iron and Steel Institute of Japan.
   Google Scholar
• Duff DM, Tasker PW. Reporte TP 1155[M] Harwell Laboratory,oxon,U.K.,1986.
   Google Scholar
• Niu Y, Tan H, Hui S. Ash-related issues during biomass combustion: alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures. Prog Energy Combust Sci,2016,52:1–61.
   Web of Science ®Google Scholar
• Antunes RA, de Oliveira MCL. Corrosion in biomass combustion: a materials selection analysis and its interaction with corrosion mechanisms and mitigation strategies[J]. Corros Sci. 2013;76:6–26.
   Web of Science ®Google Scholar
• Meisner TM, Montero X, Fahsing D. Cr diffusion coatings on a ferritic-martensitic steel for corrosion protection in KCl-rich biomass co-firing environments[J]. Corros Sci. 2020;164:108343.
   Web of Science ®Google Scholar
• Gruber T, Schulze K, Scharler R. Investigation of the corrosion behaviour of 13CrMo4-5 for biomass fired boilers with coupled online corrosion and deposit probe measurements[J]. Fuel. 2015;144:15–24.
   Web of Science ®Google Scholar
• O’Hagan CP, Barry J, O’Brienc SB, et al. A microstructural investigation into the accelerated corrosion of P91 steel during biomass co-firing[J]. Corros Sci. 2016;109:101–114.
   Web of Science ®Google Scholar
• Nielsena HP, Frandsena FJ, Dam-Johansen K. The implications of chlorine-associated corrosion on the operation of biomass-fired boilers[J]. Prog Energy Combust Sci. 2000;26(3):283–298.
   Web of Science ®Google Scholar
• Phother-Simon J, Hanif I, Liske J. The influence of a KCl-rich environment on the corrosion attack of 304L: 3D FIB/SEM and TEM investigations[J]. Corros Sci. 2021;183:109315.
   Web of Science ®Google Scholar
• Pooja M, Ravishankar KS, Madav V. High temperature corrosion behaviour of stainless steels and Inconel 625 in hydroxide salt[J]. MaterToday:Proc. 2021;46:2612–2615.
   Google Scholar
• Reinmöller M, Klinger M, Thieme E. Analysis and prediction of slag-induced corrosion of chromium oxide-free refractory materials during fusion of coal and biomass ash under simulated gasification conditions[J]. Fuel Process Technol. 2016;149:218–230.
   Web of Science ®Google Scholar