References
- Bergmann HJ, Zusammenstellung von Bestrahlungskriechdaten der Werkstoffe 1.4970 KV; 1.4970 KV, A und 1.4981 KV (Materialdatenreferenzliste). Interatom - Belgonucléaire, Report Nr.: ITB 403.31113_4, 1983
- Hussein E. Emerging small modular nuclear power reactors: a critical review. Phy Open. 2020;5(100038):100038–100326. doi: 10.1016/j.physo.2020.100038
- Holmström S. Determination of high temperature material properties of 15-15Ti steel by small specimen techniques, EUR 28746 EN. Luxembourg: Publications Office of the European Union; 2017. ISBN 978-92-79-72278-3. doi:10.2760/259065.
- Partitioning and transmuter research initiative in a collaborative innovation action (PATRICIA), https://patricia-h2020.eu/
- Cautaerts N, Delville R, Dietz W, et al. Thermal creep properties of Ti-stabilized DIN 1.4970 (15-15Ti) austenitic stainless steel pressurized cladding tubes. J Nucl Mater. 2017;493:154–167. doi:10.1016/j.jnucmat.2017.06.013
- Delville R, Specifications DIN 1.4970 24% CW cladding tubes TASTE project, RESTRICTED CONTRACT REPORT SCK•CEN-R-5686, 2014.
- Freire LM. Evolutions microstructurales et comportement en fluage à haute température d’un acier inoxydable austénitique. PhD Thesis, Ecole doctorale n°432, Evolution microstructurales et comportement en fluage a haute temperature d’un acier inoxydable austenitique. de l’Université de recherche Paris Sciences et Lettres, PSL Research University; 2018.
- Holmström S, Delville R, Terentyev D, Thermal creep properties of virgin and irradiated cladding tubes made of Ti-stabilized DIN 1.4970 (15-15Ti) austenitic stainless steel6th International conference on Creep and Fracture, ECCC Conference, Edinburgh, UK, Submitted to the Special issue of Journal of Materials at High Temperature.
- Wilshire B, Scharning PJ, Hurst R. A new approach to creep data assessment. Materials Science And Engineering: A, Volumes 510–511. 2009;3–6. ISSN 0921-5093.doi: 10.1016/j.msea.2008.04.125.
- EN 13445-3:2014+A4. 2018, Unfired pressure vessels – design
- Tsisar V, Schroer C, Wedemeyer O, et al. Corrosion behavior of austenitic steels 1.4970, 316L and 1.4571 in flowing LBE at 450 and 550°C with 10−7mass% dissolved oxygen. J Nucl Mater. 2014;454(1–3):332–342. doi: 10.1016/j.jnucmat.2014.08.024
- Holdsworth, S.R., ed. ECCC Recommendations Volumes 5 Part 1a, ‘Generic recommendations and guidance for the assessment of full size creep rupture datasets’, Issue 6, Italy: publ. Centro Sviluppo Materiali; 2014.