References
- Cheng, N.S., and Chua, L.H.C. (2005). “Comparisons of sidewall correction of bed shear stress in open-channel flows.” J. Hydrocarbon Eng., 131, 605–609.
- Cruff, R.W. (1965). “Cross-channel transfer of linear momentum in smooth rectangular channels (Laboratory studies of open-channel flow).“ U.S. G.P.O., Washington, DC.
- Ghosh, S.N., and Roy, N. (1970). “Boundary shear distribution in open channel flow.” J. Hydr. Div (ASCE), 96(HY4), 967–994.
- Guo, J., and Julien, P.Y. (2005). “Shear stress in smooth rectangular open-channel flows.” J. Hydrocarbon Eng., 125, 30–37.
- Kartha, V.C., and Leutheusser, H.J. (1970). “Distribution of tractive force in open-channels.” J. Hydraul. Div. Am. Soc. Civ. Eng., 96(7), 1469–1483.
- Khatua, K.K. (2008). “Interaction of flow and estimation of discharge in two stage meandering compound channels.” Thesis Presented to the National Institute of Technology, Rourkela, in partial fulfilments of the requirements for the Degree of Doctor of philosophy.
- Khatua, K.K., and Patra, K.C. (2010). “Evaluation of boundary shear distribution in a meandering channel.” Proc. ninth Int. Conf. Hydro-Science and Engineering, IIT Madras, Chennai, India, ICHE, 74.
- Knight, D.W. (1981). “Boundary shear in smooth and rough channels.” J. Hydrocarbon Div (ASCE), 107(HY7), 839–851.
- Knight, D.W., Demetriou, J.D., and Hamed, M.E. (1984). “Boundary shear in smooth rectangular channels.” J. Hydrocarbon Eng. (ASCE), 110, 405–422.
- Knight, D.W., and Hamed, M.E. (1984). “Boundary shear in symmetrical compound channels.” J Hydraul Eng. (ASCE), 110(19217), 1412–1430.
- Knight, D.W., and Patel, H.S. (1985). “Boundary shear in smooth rectangular ducts.” J. Hydrocarbon Eng (ASCE), 111, 29–47.
- Knight, D.W., and Sterling, M. (2000). “Boundary shear in circular pipes running partially full.” J. Hydrocarbon Eng (ASCE), 126(4), 263–275.
- Knight, D.W., Yuan, Y.M., and Fares, Y.R. (1992). “Boundary shear in meandering channels.” Proc. Inst. Symp. Hydraulic research in nature and laboratory, Wuhan, China (1992) Paper No.11017, 118, 151–159.
- Lashkar, A.B., and Fathi, M.M. (2010). “Wall and bed shear forces in open channels.” Res. J. Phys., 4, 1–10.
- Myers, W.R.C. (1978). “Momentum transfer in a compound channel.” J. Hydrocarbon Res., 16(2), 139–150.
- Patel, V.C. (1965). “Calibration of the Preston Tube and limitations on its use in pressure gradients.” J. Fluid. Mech., 23, 185–208.
- Patel, H.S. (1984). “Boundary shear in rectangular and compound ducts.” Doctoral dissertation, University of Birmingham.
- Patra, K.C. (1999). “Flow interaction of meandering river with flood plains.” Thesis Presented to the Indian Institute of Technology, Kharagpur, at Kharagpur, in partial fulfilment of the requirements for the Degree of Doctor of Philosophy.
- Seckin, G., Seckin, N., and Yurtal, R.G. (2006). “Boundary shear stress analysis in smooth rectangular channels.” Can. J. Civ. Eng., 33, 336–342.