Multi-variable regression models for prediction of discharge and approach velocity coefficients in flow measurement flumes with compound cross-section

References

• Al-Khatib, I.A. (1989). “Hydraulic characteristics of flow measurement flumes of rectangular compound cross sections.” M.Sc. thesis, Middle East Tech. University, Ankara, Turkey.
   Google Scholar
• Al-Khatib, I.A. (1993). “Hydraulic characteristics and optimum design of symmetrical compound channels for flow measurements.” Ph.D. dissertation, Middle East Tech. University, Ankara, Turkey.
   Google Scholar
• Al-Khatib, I.A. (1999). “Modular limit for flumes of rectangular compound sections.” Turkish J. Eng. Environ. Sci., 23, 1–8.
   Google Scholar
• Al-Khatib, I.A., Dweik, A.A., and Gogus, M. (2012). “Evaluation of separate channel methods for discharge computation in asymmetric compound channels.” Flow Meas. Instrum., 24, 19–25.10.1016/j.flowmeasinst.2012.02.004
   Web of Science ®Google Scholar
• Al-Khatib, I.A., Abu Hassan, H., and Abaza, K.A. (2013). “Application and validation of regression analysis in the prediction of discharge in asymmetric compound channels.” J. Irrigation and Drainage, ASCE, 139(7), 542–550.
   Web of Science ®Google Scholar
• Boiten, W. (2002). “Flow measurement structures.” Flow Meas. Instrum., 13(5–6), 203–207.10.1016/S0955-5986(02)00057-2
   Web of Science ®Google Scholar
• Bos, M.G. (1977). “The use of long-throated flumes to measure flows in irrigation and drainage canals.” Agric. Water Manage., 1, 111–126.10.1016/0378-3774(77)90035-X
   Web of Science ®Google Scholar
• Bos, M.G. (1989). Discharge measurement structures, 3rd edn, Wageningen, Publication 20. International Institute for Land Reclamation and Improvement. 401 pp.
   Google Scholar
• Bos, M.G., and Reinink, Y. (1981). “Required head loss over long-throated flumes.” J. Irrigation and Drainage Div, ASCE, 107(1), 87–102.
   Web of Science ®Google Scholar
• Bos, M.G., Replogle, J.A., and Clemmens, A.J. (1984). Flow measuring flumes for open channel systems, John Wiley and Sons, New York, NY.
   Google Scholar
• Clemmens, A.J., Bos, M.G., and Replogle, J.A. (1987). “Contraction ratios for weir and flume designs.” J. Irrigation and Drainage Eng., ASCE, 113(3), 420–424.10.1061/(ASCE)0733-9437(1987)113:3(420)
   Web of Science ®Google Scholar
• Clemmens, A.J., Replogle, J.A., and Bos, M.G. (1984). “Rectangular measuring flumes for lined and earthen channels.” J. Irrigation and Drainage Eng., ASCE, 110(2), 121–137.10.1061/(ASCE)0733-9437(1984)110:2(121)
   Web of Science ®Google Scholar
• Clemmens, A.J., Wahl, T.L., Bos, M.G., and Replogle, J.A. (2001). Water measurement with flumes and weirs, vol. 58, Wageningen, International Institute for Land Reclamation and Improvement/ILRI Publication.
   Google Scholar
• Emamgholizadeh, S., and Assare, K. (2008). “Investigation of the upstream and downstream slope of the long-throated flumes on the discharge coefficient.” J. Eng. Appl. Sci., 3(2), 62–70 (Asian Research Publishing Network).
   Google Scholar
• Ghimire, B.N.S., and Reddy, M.J. (2010). “Development of stage-discharge rating curve in river using genetic algorithms and model tree.” International Workshop: Advances in Statistical Hydrology, May 23–25, Taormina, Italy.
   Google Scholar
• Göğüş, M., and Al-Khatib, I. (1995). “Flow measurement flumes of rectangular compound cross section.” J. Irrigation and Drainage Eng., ASCE, 121(2), 135–142.
   Web of Science ®Google Scholar
• Göğüş, M., Defne, Z., and Özkandemir, V. (2006). “Broad-crested weirs with rectangular compound cross sections.” J. Irrigation and Drainage, ASCE, 132(3), 272–280.
   Web of Science ®Google Scholar
• Gonzalez, C.A., and Chanson, H. (2007). “Experimental measurements of velocity and pressure distributions on a large broad-crested weir.” Flow Meas. Instrum., 18(3–4), 107–113.10.1016/j.flowmeasinst.2007.05.005
   Web of Science ®Google Scholar
• Heiner, B., and Barfuss, S.L. (2011). “Parshall flume discharge corrections: wall staff gauge and centerline measurements.” J. Irrigation and Drainage Eng., ASCE, 137(12), 779–792.10.1061/(ASCE)IR.1943-4774.0000355
   Web of Science ®Google Scholar
• Kutner, M.H., Nachtsheim, C.J., and Neter, J. (2004). Applied linear regression models, 4th edn, Irwin, McGraw-Hill.
   Google Scholar
• Sahu, M., Khatua, K.K., and Mahapatra, S.S. (2011). “A neural network approach for prediction of discharge in straight compound open channel flow.” Flow Meas. Instrum., 22, 438–446.10.1016/j.flowmeasinst.2011.06.009
   Web of Science ®Google Scholar
• Unal, B., Mamak, M., Seckin, G., and Cobaner, M. (2010). “Comparison of an ANN approach with 1-D and 2-D methods for estimating discharge capacity of straight compound channels.” Adv. Eng. Softw., 41, 120–129.10.1016/j.advengsoft.2009.10.002
   Web of Science ®Google Scholar
• Van Prooijen, B.C., Battjes, J.A., and Uijttewaal, W.S.J. (2005). “Momentum exchange in straight uniform compound channel flow.” J. Hydraul. Eng., ASCE, 131(3), 175–183.10.1061/(ASCE)0733-9429(2005)131:3(175)
   Web of Science ®Google Scholar
• Vatankhah, A.R., and Mahdavi, A. (2012). “Simplified procedure for design of long-throated flumes and weirs.” Flow Meas. Instrum., 26, 79–84.10.1016/j.flowmeasinst.2012.04.007
   Web of Science ®Google Scholar
• Wahl, T.L., Clemmens, A.J., Replogle, J.A., and Bos, M.G. (2000). “WinFlume - windows-based software for the design of long-throated measuring flumes.” Fourth Decennial National Irrigation Symposium, American Society of Agricultural Engineers, Nov. 14–16, 2000, Phoenix, Arizona.
   Google Scholar
• Wahl, T.L., Clemmens, A.J., Replogle, J.A., and Bos, M.G. (2005). “Simplified design of flumes and weirs.” Irrigation and Drainage, 54(2), 231–247.10.1002/(ISSN)1531-0361
   Web of Science ®Google Scholar