References
- Beg, M., and Beg, S. (2014). “Scour hole characteristics of two unequal size bridge piers in tandem arrangement.” ISH J. Hydraul. Eng., 21(1), 85–96. doi:https://doi.org/10.1080/09715010.2014.963176
- Ben Mohammad Khajeh, S., Vaghefi, M., and Mahmoudi, A. (2017). “The scour pattern around an inclined cylindrical pier in a sharp 180-degree bend: An experimental study.” Int. J. River Basin Manage., 15(2), 207–218. doi:https://doi.org/10.1080/15715124.2016.1274322
- Bozkus, Z., and Çeşme, M. (2010). “Reduction of scouring depth by using inclined piers.” Can. J. Civ. Eng., 37(12), 1621–1630. doi:https://doi.org/10.1139/L10-099
- Chiew, Y.M., and Melville, B.W. (1987). “Local scour around bridge piers.” J. Hydraul. Res., 25(1), 15–26. doi:https://doi.org/10.1080/00221688709499285
- Dargahi, B. (1990). “Controlling mechanism of local scouring.” J. Hydraul. Eng., 116(10), 1197–1214. doi:https://doi.org/10.1061/(ASCE)0733-9429(1990)116:10(1197)
- Ehteram, M., and Meymand, A.M. (2015). “Numerical modelling of scour depth at side piers of the bridge.” J. Comput. Appl. Math., 280, 68–79. doi:https://doi.org/10.1016/j.cam.2014.11.039
- Emami, Y., Salamatian, S.A., and Ghodsian, M. (2008). “Scour at cylindrical bridge pier in a 180 degree channel bend.” Fourth Int. Conf. Scour and Erosion, (pp. 256–262). Tokyo, Japan.
- Hannah, C. (1980). “Scour at pile groups.” Thesis (PhD), University of Canterbury Library, New Zealand.
- Ippen, A.T. (1962). “Stream dynamics and boundary shear distributions for curved trapezoidal channels.” Depart. Civ. Eng., Massachusetts Ins. Technol(vol. 47).
- Kamel, B., IIhem, K., Ali, F., and Abdelbaki, D. (2014). “3D simulation of velocity profile of turbulent flow in open channel with complex geometry.” Phys. Procedia, 55(1–4), 119–128. doi:https://doi.org/10.1016/j.phpro.2014.07.018
- Leschziner, M.A., and Rodi, W. (1979). “Calculation of strongly curved open channel flow.” J. Hydraul. Div., 105(10), 1297–1314.
- Lien, H., Hsieh, T., Yang, J., and Yeh, K. (1999). “Bend- flow simulation using 2D depth-averaged model.” J. Hydraul. Eng., 125(10), 1097–1108. doi:https://doi.org/10.1061/(ASCE)0733-9429(1999)125:10(1097)
- Melville, B.W., and Coleman, S.E. (2000). “Bridge scour.” Water Resources Publication.
- Melville, B.W., and Hadfield, A.C. (1999). “Use of sacrificial piles as pier scour countermeasures.” J. Hydraul. Eng., 125(11), 1221–1224. doi:https://doi.org/10.1061/(ASCE)0733-9429(1999)125:11(1221)
- Neill, C.R. (1967). “Mean-velocity criterion for scour of coarse uniform bed-material.” In: Proc. 12th Congr. Int. Assoc. Hydraul. Res., Colorado, U.S.A.
- Oliveto, G., and Hager, W.H. (2002). “Temporal evolution of clear-water pier and abutment scour.” J. Hydraul. Eng., 128(9), 811–820. doi:https://doi.org/10.1061/(ASCE)0733-9429(2002)128:9(811)
- Raudkivi, A.J., and Ettema, R. (1983). “Clear-water scour at cylindrical piers.” J. Hydraul. Eng., 109(3), 338–350. doi:https://doi.org/10.1061/(ASCE)0733-9429(1983)109:3(338)
- Vaghefi, M., Ghodsian, M., and Salimi, S. (2016a). “The effect of circular bridge piers with different inclination angles toward downstream on scour.” Sadhana, 41(1), 75–86. doi:https://doi.org/10.1007/s12046-015-0443-x
- Vaghefi, M., Ghodsian, M., and Salimi, S. (2016b). “Scour formation due to laterally inclined circular pier.” Arabian J. Sci. Eng., 41(4), 1311–1318. doi:https://doi.org/10.1007/s13369-015-1920-6