References
- Afshar, H., and Hoseini, S.H. (2013). “Experimental and 3-D numerical simulation of flow over a rectangular broad-crested weir.” Int. J. Eng.Adv. Technol., 2(6), 214–219.
- Aksoy, A.O., and Doğan, M. (2016). “Experimental investigation of the approach angel effects on the discharge efficiency for broad crested weirs.” Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi A-Uygulamali Bilimler Ve Mühendislik, 17(2), 279–286. doi:https://doi.org/10.18038/btda.48930.
- Aydin, M.C., and Emiroglu, M.E. (2013). “Determination of capacity of labyrinth side weir by CFD.” Flow Meas. Instrum., 29, 1–8. doi:https://doi.org/10.1016/j.flowmeasinst.2012.09.008.
- Azimi, H., and Shabanlou, S. (2018). “U-shaped channels along the side weir for subcritical and supercritical flow regimes.” ISH J. Hydraul. Eng., 138, 1–11. doi:https://doi.org/10.1080/09715010.2018.1493706.
- Azimi, H., Shabanlou, S., Ebtehaj, I., and Bonakdari, H. (2016). “Discharge coefficient of rectangular side weirs on circular channels.” Int. J. Nonlinear Sci. Numer. Simul., 17(7–8), 391–399. doi:https://doi.org/10.1515/ijnsns-2016-0033.
- Breuer, M., Lakehal, D., and Rodi, W. (1996). “Flow around a surface mounted cubical obstacle: Comparison of LES and RANS- results in computation of three-dimensional complex flows.” Vieweg+ Teubner Verlag, Wiesbaden, Germany, 22–30. doi:https://doi.org/10.1007/978-3-322-89838-8_4.
- Cable, M. (2009). An evaluation of turbulence models for the numerical study of forced and natural convective flow in Atria ( Doctoral dissertation, Queen’s University).
- Casey, M., and Wintergerste, T. (2000). “ERCOFTAC Special Interest Group on Quality and Trust in Industrial CFD-Best Practice Guidelines.”European research community on flow, turbulence and combustion, European Union.
- Chero, E., Torabi, M., Zahabi, H., Ghafoorisadatieh, A., and Bina, K. (2019). “Numerical analysis of the circular settling tank.” Drinking Water Eng. Sci., 12(2), 39–44. doi:https://doi.org/10.5194/dwes-12-39-2019.
- Daneshfaraz, R., and Ghaderi, A. (2017). “Numerical investigation of inverse curvature ogee spillway.” Civ. Eng. J., 3(11), 1146–1156. doi:https://doi.org/10.28991/cej-030944.
- Daneshfaraz, R., Ghahramanzadeh, A., Ghaderi, A., Joudi, A.R., and Abraham, J. (2016a). “Investigation of the effect of edge shape on characteristics of flow under vertical gates.” J. Am. Water Works Assn., 108(8),425–432. doi: https://doi.org/10.5942/jawwa.2016.108.0102.
- Daneshfaraz, R., Joudi, A. R., Ghahramanzadeh, A., and Ghaderi, A. (2016b). “Investigation of flow pressure distribution over a stepped spillway.” Advances and Applications in Fluid Mechanics, 19(4), 811. doi:https://doi.org/10.17654/FM019040811
- Daneshfaraz, R., Minaei, O., Abraham, J., Dadashi, S., and Ghaderi, A. (2019). “3-D Numerical simulation of water flow over a broad-crested weir with openings.” ISH J. Hydraul. Eng., 1–9. doi:https://doi.org/10.1080/09715010.2019.1581098.
- Fröhlich, J., and Von Terzi, D. (2008). “Hybrid LES/RANS methods for the simulation of turbulent flows.” Prog. Aerosp. Sci., 44(5), 349–377. doi:https://doi.org/10.1016/j.paerosci.2008.05.001.
- Galperin, B.A., and Orszag, S.A. (1993). “Large eddy simulation of complex engineering and geophysical flows.”, Cambridge University Press. United Kingdom, Cambridge, England.
- Ghaderi, A., and Abbasi, S. (2019). “CFD simulation of local scouring around airfoil-shaped bridge piers with and without collar.” Sādhanā, 44(10), 216. doi:https://doi.org/10.1007/s12046-019-1196-8.
- Ghaderi, A., Abbasi, S., Abraham, J., and Azamathulla, H.M. (2020a). “Efficiency of trapezoidal labyrinth shaped stepped spillways.” Flow Meas. Instrum., 72, 101711. doi:https://doi.org/10.1016/j.flowmeasinst.2020.101711.
- Ghaderi, A., Dasineh, M., Abbasi, S., and Abraham, J. (2020b). “Investigation of trapezoidal sharp-crested side weir discharge coefficients under subcritical flow regimes using CFD.” Appl. Water Sci., 10(1), 31. doi:https://doi.org/10.1007/s13201-019-1112-8.
- Johansson, M. (2012). “Evaluation of RANS turbulence models for the hydrodynamic analysis of an axisymmetric streamlined body with special consideration of the velocity distribution in the stern region.” A master’s thesis, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, KTH Royal Institute of Technology, Stockholm, Sweden.
- Kvočka, D., Falconer, R.A., and Bray, M. (2015). “Appropriate model use for predicting elevations and inundation extent for extreme flood events.” Nat. Hazards, 79(3), 1791–1808. doi:https://doi.org/10.1007/s11069-015-1926-0.
- Launder, B.E., and Spalding, D.B. (1983). “The numerical computation of turbulent flows.” Numerical prediction of flow, heat transfer, turbulence and combustion, Pergamon, Published by Elsevier Ltd, 96–116.
- Mishra, P., and Aharwal, K.R. (2018). “A review on selection of turbulence model for CFD analysis of air flow within a cold storage.” IOP conference series: Materials science and engineering, United Kingdom, Vol. 402 No. 1. IOP Publishing, 012145.
- Nichols, R.H., and Nelson, C.C. (2003). “Applications of hybrid RANS/LES turbulence models.” 41 st AIAA Aerospace Sciences Meeting & Exhibit, Reno, NV.
- Olsen, L.E., Abraham, J.P., Cheng, L.J., Gorman, J.M., and Sparrow, E.M. (2019). “Summary of forced-convection fluid flow and heat transfer for square cylinders of different aspect ratios ranging from the cube to a two-dimensional cylinder.” Adv. Heat Transfer, 51, 351–457. doi: https://doi.org/10.1016/bs.aiht.2019.05.002.
- Qi, M., Li, J., Chen, Q., and Zhang, Q. (2018). “Roughness effects on near-wall turbulence modelling for open-channel flows.” J. Hydraul. Res, 56(5), 648–661. doi:https://doi.org/10.1080/00221686.2017.1399931.
- Sparrow, E.M., Gorman, J.M., Abraham, J.P., and Minkowycz, W.J. (2017). “Validation of turbulence models for numerical simulation of fluid flow and convective heat transfer.” Adv. Heat Transfer, 49, 397–421. doi: https://doi.org/10.1016/bs.aiht.2017.09.002.
- Van Driest, E.R. (1956). “On turbulent flow near a wall.” J. Aeronaut. Sci., 23(11), 1007–1011. doi:https://doi.org/10.2514/8.3713.
- Viti, N., Valero, D., and Gualtieri, C. (2019). “Numerical simulation of hydraulic jumps. Part 2: Recent results and future outlook.” Water, 11(1), 28. doi:https://doi.org/10.3390/w11010028.
- Wang, F.J. (2004). “Analysis of computational fluid dynamics: Theory and application of CFD software.” Tsinghua University Press, Beijing, China, (In Chinese).
- Zahabi, H., Torabi, M., Alamatian, E., Bahiraei, M., and Goodarzi, M. (2018). “Effects of geometry and hydraulic characteristics of shallow reservoirs on sediment entrapment.” Water, 10(12), 1725. doi:https://doi.org/10.3390/w10121725.