References
- Aminoroayaie Yamini, O., Kavianpour, M., Mousavi, S.H., Movahedi, A., and Bavandpour, M. (2018). “Experimental investigation of pressure fluctuation on the bed of compound flip buckets.” ISH J. Hydraul. Eng., 24(1), 45–52. doi:https://doi.org/10.1080/09715010.2017.1344572
- Barenblatt, G. (1987). “Dimensional analysis.” Gordon and Breach Science, Amsterdam, The Netherlands.39–103.
- Chadwick, A., and Morfett, J. (1993). Hydraulics in civil and environmental engineering, FN SPON, London, E.
- Erpicum, S., Archambeau, P., Dewals, B., and Pirotton, M. (2010). “Experimental investigation of the effect of flip bucket splitters on plunge pool geometry.” Wasserwirtschaft, 4, 110–112. doi:https://doi.org/10.1007/BF03241631
- Felder, S., and Chanson, H. (2015). “Simple design criterion for residual energy on embankment dam stepped spillways.” J. Hydraul. Eng, 142(4), 04015062. doi:https://doi.org/10.1061/(ASCE)HY.1943-7900.0001107
- Googheri, Y.S., Saneie, M., and Ershadi, S. (2017). “Three-dimension numerical simulation of scour temporal changes due to flow in the downstream of combined weirs and gate model.” Civ. Eng. J., 3(11), 1111. doi:https://doi.org/10.28991/cej-030941
- Hager, W.H. (2018). Energy dissipators: IAHR hydraulic structures design manuals, CRC Press, London, Vol. 9, Routledge.
- Hamedi, A., Hajigholizadeh, M., and Mansoori, A. (2016). “Flow simulation and energy loss estimation in the nappe flow regime of stepped spillways with inclined steps and end sill: A numerical approach.” Civ. Eng. J., 2(9), 426–437. doi:https://doi.org/10.28991/cej-2016-00000047
- Heller, V., Hager, W.H., and Minor, H.-E. (2005). “Ski jump hydraulics.” J. Hydraul. Eng, 131(5), 347–355. doi:https://doi.org/10.1061/(ASCE)0733-9429(2005)131:5(347)
- Heller, V., Hager, W.H., and Minor, H.-E. (2006). “Closure to “Ski jump hydraulics” by Valentin Heller, Willi H. Hager, and Hans-Erwin Minor.” J. Hydraul. Eng, 132(10), 1117. doi:https://doi.org/10.1061/(ASCE)0733-9429(2006)132:10(1117)
- Horton, R.E. (1906). Weir experiments, coefficients, and formulas, US Government Printing Office, Washington DC.
- Juon, R., and Hager, W.H. (2000). “Flip bucket without and with deflectors.” J. Hydraul. Eng, 126(11), 837–845. doi:https://doi.org/10.1061/(ASCE)0733-9429(2000)126:11(837)
- Khatsuria, R.M. (2004). Hydraulics of spillways and energy dissipators, CRC Press, London.
- Mansoori, A., Erfanian, S., and Moghadam, F.K. (2017). “A study of the conditions of energy dissipation in stepped spillways with Λ-shaped step using FLOW-3D.” Civ. Eng. J., 3(10), 856–867. doi:https://doi.org/10.28991/cej-030920
- Mason, P. (1984). “Erosion of plunge pools downstream of dams due to the action of free-T-rajectory jets.” Proc. Inst. Civ. Eng., 76(2), 523–537. doi:https://doi.org/10.1680/iicep.1984.1257
- Milford, J., and Dugdale, G. (1990). “Estimation of rainfall using geostationary satellite data.” Applications of Remote Sensing in Agriculture, Proceedings of the 48th Easter School in Agricultural Science, University of Nottingham, April 1989. Butterworth, 97–110.
- Movahedi, A., Kavianpour, M., and Aminoroayaie Yamini, O. (2019). “Experimental and numerical analysis of the scour profile downstream of flip bucket with change in bed material size.” ISH J. Hydraul. Eng., 25(2), 188–202. doi:https://doi.org/10.1080/09715010.2017.1398111
- Movahedi, A., Kavianpour, M., and Yamini, O.A. (2018). “Evaluation and modeling scouring and sedimentation around downstream of large dams.” Environ. Earth Sci., 77(8), 320. doi:https://doi.org/10.1007/s12665-018-7487-2
- Nosrati, K., Tahershamsi, A., and Taheri, S.H.S. (2017). “Numerical analysis of energy loss coefficient in pipe contraction using ansys cfx software.” Civ. Eng. J., 3(4), 288–300. doi:https://doi.org/10.28991/cej-2017-00000091
- Novák, P., and Cabelka, J. (1981). Models in hydraulic engineering; physical principles and design applications, Pitman Advanced Publishing Program, Boston (Mass.).
- Novak, P., Moffat, A., Nalluri, C., and Narayanan, R. (2017). Hydraulic structures, CRC Press, London.
- Schmocker, L., Pfister, M., Hager, W.H., and Minor, H.-E. (2008). “Aeration characteristics of ski jump jets.” J. Hydraul. Eng, 134(1), 90–97. doi:https://doi.org/10.1061/(ASCE)0733-9429(2008)134:1(90)
- Steiner, R., Heller, V., Hager, W.H., and Minor, H.-E. (2008). “Deflector ski jump hydraulics.” J. Hydraul. Eng, 134(5), 562–571. doi:https://doi.org/10.1061/(ASCE)0733-9429(2008)134:5(562)
- Teng, P., and Yang, J. (2018). “Modeling and prototype testing of flows over flip-bucket aerators.” J. Hydraul. Eng, 144(12), 04018069. doi:https://doi.org/10.1061/(ASCE)HY.1943-7900.0001531
- Wahl, T.L., Frizell, K.W., and Falvey, H.T. (2019). “Uplift pressures below spillway chute slabs at unvented open offset joints.” J. Hydraul. Eng, 145(11), 04019039. doi:https://doi.org/10.1061/(ASCE)HY.1943-7900.0001637
- Yamini, O.A., Kavianpour, M., and Movahedi, A. (2015). “Pressure distribution on the bed of the compound flip buckets.” J. Comput. Multiphase Flows, 7(3), 181–194. doi:https://doi.org/10.1260/1757-482X.7.3.181