Quasi-static CFD research of the spool flow valve parameters

References

• Abdollahi, A., Kabiri-Samani, A., Asghari, K., Atoof, H., and Bagheri, S. (2017). “Numerical modeling of flow field around the labyrinth side-weirs in the presence of guide vanes.” ISH J. Hydraul. Eng., 23(1), 71–79. doi:10.1080/09715010.2016.1239555.
   Google Scholar
• Aguerrea, H.J., Dami´ana, S.M., Gimeneza, J.M., and Nigro, N. (2013). “Modeling of compressible fluid problems with OpenFOAM using dynamic mesh technology.” Mecanica Computacional, XXXII, 995–1011.
   Google Scholar
• Basavaraj, H., and Vilas, S. (2018). “Theoretical analysis of steady state operating forces in control valves.” MATEC Web Conf., 144, 01002. doi:10.1051/matecconf/201814401002.
   Google Scholar
• Bashta, T.M. (1972). Gidroprivod i gidropnevmoavtomatika [Hydraulic drive and hydropneumoautomatics], Mashinostroenie [Mechanical engineering], Moscow.
   Google Scholar
• Blackburn, J.F., et al. (1960). Fluid power control, John Wiley and Sons Inc, Newyork London.
   Google Scholar
• Bostan, M., Akhtari, A.A., Bonakdari, H., Gharabaghi, B., and Noori, O. (2020). “Investigation of a new shock damper system efficiency in reducing water hammer excess pressure due to the sudden closure of a control valve.” ISH J. Hydraul. Eng., 26(3), 258–266. doi:10.1080/09715010.2018.1479665.
   Google Scholar
• Dergachev, A.A., Ivanov, M.J., Kopkov, G.A., Kuchin, A.P., Novikov, A.E., Resh, G.F., and Sinjavin, V.G. (2006). “Reguljator rashoda [Flow rate regulator].” Patent RF, no. 2548613.
   Google Scholar
• Hubballi, B.V., and Sondur, V.B. (2015). “Directional control spool valve performance criteria and analysis of flow-reaction forces.” Int. J. Emerging Technol. Adv. Eng., 5, 86–93.
   Google Scholar
• Ivanov, M.Y., Novikov, A.E., and Res, G.F. (2017). “Osobennosti proektirovaniya i chislennogo modelirovaniya stabilizatora raskhoda v sistemah sinhronizacii dvizheniya ispolnitel’nyh organov. [Features of design and numerical simulation of the flow valve in the systems of synchronization of the movement of executive bodies].” Vestnik BMSTU. Ser. Mashinostroenie. [Bull. Bauman Moscow State Tech. Univ. Ser. Mashinostroenie.], 2, 54–65. doi:10.18698/0236-3941-2017-2-54-65.
   Google Scholar
• Kashfutdinov, B.D., and Shcheglov, G.A. (2021). “Investigation of the influence of the automatic control system parameters for the case of a simple aeroservoelastic model.” 44th Academic Space Conference: Dedicated to the Memory of Academician S.P. Korolev and Other Outstanding Russian Scientists - Pioneers of Space Exploration, Bauman Moscow State Technical University, Moscow, Russia, 2318 (22).
   Google Scholar
• Kopkov, G.A., Kuchin, A.P., Novikov, A.E., Ivanov, M.J., Resh, G.F., and Antonov, D.S. (2012). “Flow regulators for synchronization of executive devices of aircraft systems.” Nauchno-tehnicheskij Jubilejnyj Sbornik. KB Himavtomatiki [Anniversary Proc. DD Chem. Autom.], 1, 219–223.
   Google Scholar
• Li, K., Choi, Y., Lee, I., and Lee, Y. (2015). “Study of the fluid flow on proportional valve in spool displacement using CFD.” J. Korean Soc. Power Syst. Eng., 19(2), 22–26. doi:10.9726/kspse.2015.19.2.022.
   Google Scholar
• Miji Cherian, R., Sajikumar, N., and Sumam, K.S. (2020). “Effect of valve closure time on transient cavitating flow through piping systems.” ISH J. Hydraul. Eng. doi:10.1080/09715010.2020.1729875.
   Google Scholar
• OpenCFD Release OpenFOAM v1912. (2019). <https://www.openfoam.com/releases/openfoam-v1912/> (Feb. 10, 2021).
   Google Scholar
• Palau-Salvador, G., González-Altozano, P., and Arviza-Valverde, J. (2008). “Three-dimensional modeling and geometrical influence on the hydraulic performance of a control valve.” J. Fluids Eng., 130, 011102–1. doi:10.1115/1.2813131.
   Web of Science ®Google Scholar
• Suribabu, C.R., and Sivakumar, P. (2021). “Simulating flow through scour valve in the water distribution networks.” ISH J. Hydraul. Eng., 1–7. doi:10.1080/09715010.2021.1881921.
   Google Scholar
• Uss, A.Y., Chernyshev, A.V., and Atamasov, N.V. (2019). “Development of calculation method and creation of vortex jet device to control gas flow.” Omsk Sci. Bull. Series Aviat.-Rocket Power Eng., 3(2), 78–86. doi:10.25206/2588-0373-2019-3-2-78-86.
   Google Scholar
• Vasilieva, V.A., and Chernyshev, A.V. (2016). “Application of numerical methods for calculation of working processes in pneudraulic devices.” Procedia Eng., 152, 454–458. doi:10.1016/j.proeng.2016.07.617.
   Google Scholar
• Vodeniktov, A., and Melnikova, V. (2019). “Aerodynamic estimation of steam turbine stop valve design using lattice Boltzmann method.” AIP Conf. Proc., 2171, 070001. doi:10.1063/1.5133212.
   Google Scholar
• Wu, D., Li, S., and Wu, P. (2015). “CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system.” Energy Convers. Manage., 101, 658–665. doi:10.1016/j.enconman.2015.06.025.
   Web of Science ®Google Scholar
• Yang, Q., Zhang, Z., Liu, M., and Hu, J. (2011). “Numerical simulation of fluid flow inside the valve.” Procedia Eng., 23, 543–550. doi:10.1016/j.proeng.2011.11.2545.
   Google Scholar
• Yin, R., and Chow, W.K. (2003). “Comparison of four algorithms for solving pressure-velocity linked equations in simulating atrium fire.” Int. J. Archit. Sci., 4(1), 24–35. doi:10.18483/ijSci.1809.
   Google Scholar
• Zhao, J., Grekhov, L., and Yue, P. (2020). “Limit of fuel injection rate in the common rail system under ultra-high pressures.” Int. J. Automot. Technol., 21(3), 649–656. doi:10.1007/s12239-020-0062-3.
   Web of Science ®Google Scholar