References
- ABNT - Associação Brasileira de Normas Técnicas. ABNT NBR 14762: Dimensionamento de estruturas de aço constituídas por perfis formados a frio, Rio de Janeiro, Brasil, 2010.
- American Iron and Steel Institute. Specification for the Design of Cold-formed Steel Structural Members, Cold-formed Steel Design Manual. Washington, USA; 2016. AISI S100-16 Standard.
- Freitas MSR, Brandão ALR, Alves AR. Reliability analysis of welded and bolted connections in cold-formed steel sections. REM, Int. Eng. J. 2018; 71(3): 371–376. doi:10.1590/0370-44672016710087.
- Toledo FFA, Freitas MSR, Brandão ALR. Reliability assessment of cold-formed steel beams by the form method. REM, Int. Eng. J. 2021; 74(2): 183–188. doi:10.1590/0370-44672020740048.
- Jardim RLF, Freitas MSR, Brandão ALR. Resistance factor calibration for perforated cold-formed steel compression members. Revista Ingeniería de Construcción (on Line). 2022; 37(1): 35–46.
- Gunalan S, Mahendran M. Web crippling tests of cold-formed steel channels under two flange load cases. J Constr Steel Res. 2015; 110: 1–15. doi:10.1016/j.jcsr.2015.01.018.
- Sundararajah L, Mahendran M, Keerthan P. Experimental studies of lipped channel beams subject to Web crippling under Two-flange load cases. J. Struct. Eng. 2016; 142(9). doi:10.1061/(asce)st.1943-541x.0001523.
- Sundararajah L, Mahendran M, Keerthan P. Web crippling experiments of high strength lipped channel beams under one-flange loading. J Constr Steel Res. 2017; 138: 851–866. doi:10.1016/j.jcsr.2017.06.011.
- Janarthanan B, Sundararajah L, Mahendran M, Keerthan P, Gunalan S. Web crippling behaviour and design of cold-formed steel sections. Thin-Walled Struct. 2019; 140: 387–403. doi:10.1016/j.tws.2019.03.042.
- Janarthanan B, Mahendran M, Gunalan S. Numerical modelling of web crippling failures in cold-formed steel unlipped channel sections. J Constr Steel Res. 2019; 158: 486–501. doi:10.1016/j.jcsr.2019.04.007.
- Zhou F, Young B. Cold-formed stainless steel sections subjected to web crippling. J. Struct. Eng. 2006; 132(1): 134–144. doi:10.1061/(ASCE)0733-9445.
- American Iron and Steel Institute. Standard Test Method for Determining the web Crippling Strength of Cold-formed Steel Beams. Washington, USA; 2008. AISI S909 Standard.
- American Iron and Steel Institute. Specification for the Design of Cold-formed Steel Structural Members, Cold-formed Steel Design. Washington, USA; 2022. AISI S100-16 (R2020) supplement 3.
- Hsiao L. Reliability based criteria for cold-formed steel members [dissertation]. Rolla (MO): University of Missouri-Rolla; 1989.
- Haldar A, Mahadevan S. Probability, Reliability and Statistical Methods in Engineering Design. John Wiley & Sons Incorporated, New York, EUA, 2000.
- Ellingwood B, Galambos T, MacGregor J, Cornell C. Development of a Probability Cased Load Criterion for American National Standard A58: Building Code Requirements for Minimum Design Loads in Buildings and Other Structures. US Dep, National Bureau of Standards, U.S. Department of Commerce, Washington, D.C., 1980.
- Yu W, Hetrakul N. Webs for Cold Formed Steel Flexural Members; Structural Behavior of Beam Webs Subjected to web Crippling and a Combination of web Crippling and Bending. Rolla (MO): University of Missouri-Rolla, 1978.
- Wing BA, Schuster RM. Web Crippling of Decks Subjected to Two Flange Loading Web Crippling of Decks Subjected to Two Flange Loading. Rolla (MO): University of Missouri-Rolla, 1982.
- Bhakta BH, LaBoube RA, Yu W. The Effect of Flange Restraint on Web Crippling Strength. Rolla (MO): University of Missouri-Rolla, 1992.
- Langan JE, LaBoube RA, Yu WW. Structural Behavior of Perforated Web Elements of Cold-Formed Steel Flexural Members Subjected to Web Crippling and a Combination of Web Crippling and Bending. Rolla (MO): University of Missouri-Rolla, 1994.
- Cain DE, LaBoube RA, Yu WW. The Effect of Flange Restraint on Web Crippling Strength of Cold-Formed Steel Z-and I-Sections. Rolla (MO): University of Missouri-Rolla, 1995.
- Gerges RR, Schuster RM. Web Crippling of Single Web Cold Formed Steel Members Subjected to End One-Flange Loading. Rolla (MO): University of Missouri-Rolla, 1998.
- Beshara B. Web Crippling of Cold-Formed Steel Members. [master’s thesis]. Waterloo: University of Waterloo; 1999.
- Beshara B, Schuster RM. Web Crippling Data and Calibrations of Cold Formed Steel Members.; 2000. (Research report RP00-2).
- Young B, Hancock GJ. Design of cold-formed channels subjected to web crippling. J. Struct. Eng. 2001; 127(10): 1137–1144. doi:10.1061/(ASCE)0733-9445(2001)127:10(1137).
- Heiyantuduwa M. Web Crippling Behaviour of Cold-Formed Thin Walled Steel Lipped Channel Beams. [dissertation]. Scotland (UK): Glasgow Caledonian Univ.; 2008.
- MacDonald M, Heiyantuduwa Don MA, Kotełko M, Rhodes J. Web crippling behaviour of thin-walled lipped channel beams. Thin-Walled Struct. 2011; 49(5). doi:10.1016/j.tws.2010.09.010.
- Uzzaman A, Lim JBP, Nash D, Rhodes J, Young B. Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition. Thin-Walled Struct. 2013: 65, doi:10.1016/j.tws.2012.12.003.
- Uzzaman A, Lim JBP, Nash D, Rhodes J, Young B. Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - part I: tests and finite element analysis. Thin-Walled Struct. 2012; 56: 38–48. doi:10.1016/j.tws.2012.03.010.
- Uzzaman A, Lim JBP, Nash D, Rhodes J, Young B. Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading. Thin-Walled Struct. 2012; 50(1): 76–86. doi:10.1016/j.tws.2011.09.009.
- Lian Y, Uzzaman A, Lim JBP, Abdelal G, Nash D, Young B. Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition – part I: tests and finite element analysis. Thin-Walled Struct. 2016; 107: 443–452. doi:10.1016/j.tws.2016.06.025.
- Lian Y, Uzzaman A, Lim JBP, Abdelal G, Nash D, Young B. Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition-part I: experimental and numerical investigation. Thin-Walled Struct. 2017; 111: 103–112. doi:10.1016/j.tws.2016.10.024.
- LLC. Minitab Statistical Software.
- Melo NB. Confiabilidade de barras de perfis formados a frio sujeitos à força em seções sem enrijecedores transversais à falha por esmagamento da alma (web crippling) [Reliability of cold formed steel bars subjected to force in sections without stiffeners transverse to web crippling]. [dissertation]. Ouro Preto: Universidade Federal de Ouro Preto; 2022.
- Liu P, Lin HZ, Der Kiureghian A. CALREL User Manual. Berkeley (CA): University of California at Berkeley, 1989. (Report No. UCB/SEMM-89/18).