REFERENCES
- Visco, A. M., N. Campo, V. Brancato, and M. Trimarch. 2013. Influence of α-tocopherol load and annealing treatment on the wear resistance of biomedical UHMWPE irradiated with electron beam. Int. J. Polym. Anal. Charact. 18: 545–556.
- Visco, A. M., L. Torrisi, N. Campo, and A. Picciotto. 2010. Comparison of surface modifications induced by ion implantation in UHMWPE. Int. J. Polym. Anal. Charact. 15: 73–86.
- Palka, N., and D. Miedzinska. 2013. Detailed non-destructive evaluation of UHMWPE composites in the terahertz range. Opt. Quantum Electron. 46: 515–525.
- Buckley, C. P., J. Wu, and D. W. Haughie. 2006. The integrity of welded interfaces in ultra high molecular weight polyethylene: Part 1-Model. Biomaterials 27: 3178–3186.
- Muratoglu, O. K., C. R. Bragdon, D. O. O’Connor, M. Jasty, W. H. Harris, R. Gul, and F. McGarry. 1999. Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE). Biomaterials 20: 1463–1470.
- Oral, E., C. A. Godleski Beckos, A. J. Lozynsky, A. S. Malhi, and O. K. Muratoglu. 2009. Improved resistance to wear and fatigue fracture in high pressure crystallized vitamin E-containing ultra-high molecular weight polyethylene. Biomaterials 30: 1870–1880.
- Wang, S. B., and S. R. Ge. 2007. The mechanical property and tribological behavior of UHMWPE: Effect of molding pressure. Wear 263: 949–956.
- Katsuhisa, T., I. Aiko, N. Shigeya, Y. Masahiro, N. Mika, and N. Kana. 2012. Effect of adding polysilane on melt-flow properties of ultra-high molecular weight PE. J. Appl. Polym. Sci. 126: E403–E409.
- Shi, N., J. G. Han, L. Z. Ni, and A. N. Zheng. 2010. Preparation and rheological characterization of ultra high molecular weight polyethylene/montmorillonite nanocomposites. Polym.-Plast. Technol. Eng. 49: 292–295.
- Höhne, G. W. H., and J. Kurelec. 2001. Temperature-modulated differential scanning calorimetric measurements on nascent ultra-high molecular mass polyethylene. Thermochim. Acta 377: 141–150.
- Wu, J. J., C. P. Buckley, and J. J. O’Connor. 2000. The origin of fusion defects in ultra-high molecular weight polyethylene for joint replacement prostheses. J. Mater. Sci. Lett. 20: 473–475.
- Fu, J., B. W. Ghali, A. J. Lozynsky, E. Oral, and O. K. Muratoglu. 2010. Ultra high molecular weight polyethylene with improved plasticity and toughness by high temperature melting. Polymer 51: 2721–2731.
- Myshkin, N. K., M. I. Petrokovets, and A. V. Kovalev. 2005. Tribology of polymers: Adhesion, friction, wear, and mass-transfer. Tribol. Int. 38: 910–921.
- Kuo, H. C., and M. C. Jeng. 2011. Dry sliding wear properties of ultra-high molecular weight polyethylene parts made by the injection molding process. Polym.-Plast. Technol. Eng. 50: 604–612.
- Gul, R. M., and F. J. McGarry. 2004. Processing of ultra-high molecular weight polyethylene by hot isostatic pressing, and the effect of processing parameters on its microstructure. Polym. Eng. Sci. 44: 1848–1847.
- Xie, M. J., and H. L. Li. 2007. Viscosity reduction and disentanglement in ultrahigh molecular weight polyethylene melt: Effect of blending with polypropylene and poly(ethylene glycol). Eur. Polym. J. 43: 3480–3486.
- Djoković, V., D. Kostoski, and D. Dudić. 1999. Effects of gamma irradiation on the stress relaxation of drawn ultrahigh molecular weight polyethylene. Radiat. Phys. Chem. 55: 605–607.
- Djokovic, V., D. Kostoski, S. Galovic, M. D. Dramicanin, and Z. Kacarevic-Popovic. 1999. Influence of orientation and irradiation on stress relaxation of linear low-density polyethylene (LLDPE): A two-process model. Polymer 40: 2631–2637.
- Kotera, M., T. Nishino, and K. Nakamae. 2000. Imidization processes of aromatic polyimide by temperature modulated DSC. Polymer 41: 3615–3619.
- Xie, Y., D. Yu, W. Wan, X. Guo, and S. Li. 2007. Effects of heating, tensile, and high pressure treatments on aggregate structure of a low density polyethylene. Polym.-Plast. Technol. Eng. 46: 377–383.
- Zhang, C. F., B. K. Zhu, G. L. Ji, and Y. X. Xu. 2006. Studies on nonisothermal crystallization of ultra-high molecular weight polyethylene in liquid paraffin. J. Appl. Polym. Sci. 99: 2782–2788.