Morphology, interfacial interaction, and thermal degradation of polycarbonate/MCM-41 (nano)composites

References

• Vahabi, H., O. Eterradossi, L. Ferry, C. Longuet, R. Sonnier, and J. M. Lopez-Cuesta. 2013. Polycarbonate nanocomposites with improved fire behavior, physical and psychophysical transparency. Eur. Polym. J. 49:319–327.
   Web of Science ®Google Scholar
• Feng, J., J. Hao, J. Du, and R. Yang. 2012. Effect of organoclay on the flammability, thermal and mechanical properties of polycarbonate nanocomposites filled with a phosphate and organoclays. Polym. Degrad. Stabil. 97:108–117.
   Web of Science ®Google Scholar
• Wang, Y., B. Wang, Y. Zhao, C. Liu, and J. Chen. 2014. Thermal degradation mechanism and kinetics of polycarbonate/silica nanocomposites. Polym. Degrad. Stabil. 107:129–138.
   Web of Science ®Google Scholar
• Nevalainen, K., J. Vuorinen, V. Villaman, R. Suihkonen, P. Jarvela, J. Sundelin, and T. Lepisto. 2009. Characterization of twin-screw-extruder-compounded polycarbonate nanoclay composites. Polym. Eng. Sci. 49:631–640.
   Web of Science ®Google Scholar
• Vani, J., S. S. Mohanty, M. R. Parvaiz, and S. K. Nayak. 2011. Influence of nanoclays and nano-TiO2 on the mechanical and thermal properties of polycarbonate nanocomposites. Macromol. Res. 19:563–572.
   Web of Science ®Google Scholar
• Maiti, S., N. K. Shrivastava, S. Suin, and B. B. Khatua. 2013. A strategy for achieving low percolation and high electrical conductivity in melt-blended polycarbonate (PC)/multiwalled carbon nanotubes (MWCNT) nanocomposites: Electrical and thermo-mechanical properties. eXPRESS Polym. Lett. 7:505–518.
   Web of Science ®Google Scholar
• Asyadi, F., M. Jawaid, A. Hassan, and M. U. Wahit. 2013. Mechanical properties of mica-filled polycarbonate/poly(acrylonitrile-butadiene-styrene) composites. Polym. Plast. Technol. Eng. 52:727–736.
   Web of Science ®Google Scholar
• Zhang, F., Q. Li, Y. Liu, S. Zhang, C. Wu, and W. Guo. 2016. Improved thermal conductivity of polycarbonate composites filled with hybrid exfoliated graphite/multi-walled carbon nanotube fillers. J. Therm. Anal. Calorim. 123:431–437.
   Web of Science ®Google Scholar
• Rathore, B. S., M. S. Gaur, and K. S. Singh. 2012. Investigation of optical and thermally stimulated properties of SiO2 nanoparticles-filled polycarbonate. J. Appl. Polym. Sci. 126:960–968.
   Web of Science ®Google Scholar
• Rouabah, F., M. Fois, L. Ibos, A. Boudenne, and D. Dadache. 2007. Mechanical and thermal properties of polycarbonate. II. Influence of titanium dioxide content and quenching on pigmented polycarbonate. J. Appl. Polym. Sci. 106:2710–2717.
   Web of Science ®Google Scholar
• Motaung, T. E., M. L. Saladino, A. S. Luyt, and D. C. Martino. 2013. Influence of the modification, induced by zirconia nanoparticles, on the structure and properties of polycarbonate. Eur. Polym. J. 49:2022–2030.
   Web of Science ®Google Scholar
• Pötschke, P., M. H. Arnaldo, and H. J. Radusch. 2012. Percolation behavior and mechanical properties of polycarbonate composites filled with carbon black/carbon nanotubes system. Polimery 57:204–211.
   Web of Science ®Google Scholar
• Suin, S., N. K. Shrivastava, S. Maiti, and B. B. Khatua. 2013. Phosphonium modified organoclay as potential nanofiller for the development of exfoliated and optically transparent polycarbonate/clay nanocomposites: Preparation and characterization. Eur. Polym. J. 49:49–60.
   Web of Science ®Google Scholar
• Jin, S. H., D. K. Choi, and D. S. Lee. 2008. Electrical and rheological properties of polycarbonate/multiwalled carbon nanotube nanocomposites. Colloids Surf. A: Physicochem. Eng. Aspects 313–314:242–245.
   Web of Science ®Google Scholar
• Caponetti, E., L. Pedone, M. L. Saladino, D. C. Martino, and G. Nasillo. 2010. MCM-41-CdS nanocomposites materials. Preparation and characterization. Microporous Mesoporous Mater. 128:101–107.
   Web of Science ®Google Scholar
• Saladino, M. L., E. Kraleva, S. Todorova, A. Spinella, G. Nasillo, and E. Caponetti. Synthesis and characterization of mesoporous Mn-MCM-41 materials. J. Alloys Compd. 509:8798–8803.
   Web of Science ®Google Scholar
• Kurdakova, V., E. Quartarone, P. Mustarelli, A. Magistris, E. Caponetti, and M. L. Saladino. 2010. PBI-based composite membranes for polymer fuel cells. J. Power Sources 195:7765–7769.
   Web of Science ®Google Scholar
• Araujo, S. A., A. S. Araujo, N. S. Fernandes, V. J. Fernandes Jr, and M. Ionashiro. 2010. Effect of the catalyst MCM-41 on the kinetics of the thermal decomposition of poly(ethylene terephthalate). J. Therm. Anal. Calorim. 99:465–469.
   Web of Science ®Google Scholar
• Cerrada, M. L., E. Perez, J. P. Lourenco, J. M. Campos, and M. R. Ribeiro. 2009. Sustainable polyethylene/MCM-41 nanocomposites by in-situ polymerization. Proceedings of the 12th International Conference on Mechanical and Technology of Composites Materials, September 22–24, Varna, Bulgaria.
   Google Scholar
• Ver Meer, M. A., B. Narasimhan, B. H. Shanks, and S. K. Mallapragada. 2010. Effect of mesoporosity on thermal and mechanical properties of polystyrene/silica composites. Appl. Mater. Interfaces 2:41–47.
   Web of Science ®Google Scholar
• Wang, N., Q. Fang, E. Chen, J. Zhang, and Y. Shao. 2009. Structure, crystallization behavior, and thermal stability of PP/MCM-41 nanocomposite. Polym. Eng. Sci. 49:2459–2466.
   Web of Science ®Google Scholar
• Wang, N., Q. Fang, F. Zhang, E. Chen, and X. Zhang. 2011. Incorporation of nano-sized mesoporous MCM-41 materials used as fillers in natural rubber composite. Mater. Sci. Eng. A 528:3321–3325.
   Web of Science ®Google Scholar
• Run, M. T., S. Z. Wu, D. Y. Zhang, and G. Wu. 2007. A polymer/mesoporous molecular sieve composite: Preparation structure and properties. Mater. Chem. Phys. 105:341–347.
   Web of Science ®Google Scholar
• Lavall, R. L., S. Ferrari, C. Tomasi, M. Marzantowicz, E. Quartarone, M. Fagnoni, P. Mustarelli, and M. L. Saladino. 2012. MCM-41 silica effect on gel polymer electrolytes based on thermoplastic polyurethane. Electrochim. Acta 60:359–365.
   Web of Science ®Google Scholar
• Mingtao, R., Z. Dayu, W. Sizhu, and W. Gang. 2007. Thermal decomposition of poly(ethylene terephthalate)/mesoporous molecular sieve composites. Front. Chem. Eng. China 1:50–54.
   Google Scholar
• Zhang, F. A., D. K. Lee, and T. J. Pinnavaia. 2009. PMMA-mesocellular foam silica nanocomposites prepared through batch emulsion polymerization and compression molding. Polymer 50:4768–4774.
   Web of Science ®Google Scholar
• Zhang, F. A., D. K. Lee, and T. J. Pinnavaia. 2010. PMMA/mesoporous silica nanocomposites: Effect of framework stricture and pore size on thermomechanical properties. Polym. Chem. 1:107–113.
   Web of Science ®Google Scholar
• Sibeko, M. A., M. L. Saladino, A. S. Luyt, and E. Caponetti. 2016. Morphology, mechanical and thermal properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding. J. Mater. Sci. 51:3957–3970.
   Web of Science ®Google Scholar
• Imai, Y., A. Terahara, Y. Hakuta, K. Matsui, H. Hayashi, and N. Ueno. 2009. Transparent (bisphenol A carbonate)-based nanocomposites with high refractive index nanoparticles. Eur. Polym. J. 45:630–638.
   Web of Science ®Google Scholar
• Gupta, M. C., and S. G. Viswanath. 1996. Role of metal oxide in the thermal degradation of bisphenol A polycarbonate. J. Therm. Anal. 46:1671–1679.
   Web of Science ®Google Scholar
• Carrion, F. J., J. Sanes, and M. D. Bermudez. 2007. Influence of ZnO nanoparticles filler on the properties and wear resistance of polycarbonate. Wear 262:1504–1510.
   Web of Science ®Google Scholar
• Motaung, T. E., M. L. Saladino, A. S. Luyt, and D. F. C. Martino. 2012. The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate. Compos. Sci. Technol. 73:34–39.
   Web of Science ®Google Scholar
• Wang, L., X. Han, J. Li, and D. Zheng. 2012. Preparation of modified mesoporous MCM-41 silica spheres and its application in pervaporation. Powder Technol. 231:63–69.
   Web of Science ®Google Scholar
• Araujo, J. A., F. T. Cruz, I. H. Cruz, and D. Cardoso. 2013. Encapsulation of polmers in CTA-MCM-41 via microemulsion. Microporous Mesoporous Mater. 180:14–21.
   Web of Science ®Google Scholar
• Michell, R. M., I. Blaszczyk-Lezak, C. Mijangos, and A. J. Müller. 2013. Confinement effects on polymer crystallization: From droplets to alumina nanopores. Polymer 54:4059–4077.
   Web of Science ®Google Scholar
• Michell, R. M., I. Blaszczyk-Lezak, C. Mijangos, and A. J. Müller. 2014. Confined crystallization of polymers within anodic aluminum oxide templates. J. Polym. Sci. B: Polym. Phys. 52:1179–1194.
   Web of Science ®Google Scholar
• Casas, M. T., R. M. Michell, I. Blaszczyk-Lezak, J. Puiggalí, C. Mijangos, A. T. Lorenzo, and A. J. Müller. 2015. Self-assembly of semicrystalline PE-b-PS diblock copolymers within AAO nanoporous templates. Polymer 70:282–289.
   Web of Science ®Google Scholar
• Luyt, A. S., M. Messori, P. Fabbri, J. P. Mofokeng, R. Taurino, T. Zanasi, and F. Pilati. 2011. Polycarbonate reinforced with silica nanoparticles. Polym. Bull. 66:991–1004.
   Web of Science ®Google Scholar
• Biswal, M., S. Mohanty, S. K. Nayak, and P. S. Kumar. 2013. Effect of functionalized nanosilica on the mechanical, dynamic-mechanical, and morphological performance of polycarbonate/nanosilica nanocomposites. Polym. Eng. Sci. 53:1287–1296.
   Web of Science ®Google Scholar
• Menczel, J. D., and R. B. Prime. 2009. Thermal Analysis of Polymers. Fundamentals and Applications. New Jersey: Wiley. ISBN: 978-0-471-76917-0
   Google Scholar
• Climent, M. J., A. Corma, S. Iborra, M. C. Navarro, and J. Primo. 1996. Use of mesoporous MCM-41 aluminosilicates as catalysts in the production of fine chemicals: Preparation of dimethylacetals. J. Catal. 161:783–789.
   Web of Science ®Google Scholar