REFERENCES
- ABAQUS. 2009. Abaqus version 6.9 documentation. Providence, RI: Dassault Systemes Simulia Corporation.
- AlfanoM, FurgiueleF, LeonardiA, MalettaC, PaulinoG. 2009. Mode I fracture of adhesive joints using tailored cohesive zone models. Int J Fract. 157(1):193–204.
- AlterovitzR, GoldbergK, OkamuraA. 2005. Planning for steerable bevel-tip needle insertion through 2D soft tissue with obstacles. In: Robotics and Automation, 2005. ICRA 2005. Proceedings of the 2005 IEEE International Conference. Barcelona, Spain. Piscataway (NJ): IEEE. p. 1640–1645.
- AzarT, HaywardV. 2008. Estimation of the fracture toughness of soft tissue from needle insertion. In: Biomedical Simulation – 4th International Symposium, ISBMS 2008. Proceedings. London, UK, July. Berlin/Heidelberg: Springer. p. 166–175.
- ChenJ, CrisfieldM, KinlochAJ, BussoEP, MatthewsFL, QiuY. 1999. Predicting progressive delamination of composite material specimens via interface elements. Mech Comp Mater Struct. 6(4):301–317.
- ChentanezN, AlterovitzR, RitchieD, ChoL, HauserKK, GoldbergK, ShewchukJR, O'BrienJF. 2009. Interactive simulation of surgical needle insertion and steering. ACM Transact Graph. 28(3):1–10.
- CourtecuisseH, JungH, AllardJ, DuriezC, LeeDY, CotinS. 2010. GPU-based real-time soft tissue deformation with cutting and haptic feedback. Prog Biophys Mol Biol. 103(2–3):159–168.
- DiMaioSP, SalcudeanSE. 2002. Needle insertion modelling for the interactive simulation of percutaneous procedures. In: Medical Image Computing and Computer-Assisted Intervention – MICCAI 2002. 5th International Conference. Proceedings, Part II. Tokyo, Japan, September. Berlin (Germany): Springer-Verlag. p. 253–260.
- DiMaioSP, SalcudeanS. 2003. Needle insertion modelling and simulation. IEEE Transact Robot Automat. 19(5):864–875.
- Franceschini G.2006. The mechanics of human brain tissue [PhD Thesis]. Trento: University of Trento.
- FrassonL, KoSY, TurnerA, ParittotokkapornT, VincentJF, Rodriguez y BaenaF. 2010. STING: a soft-tissue intervention and neurosurgical guide to access deep brain lesions through curved trajectories. Proc IME H J Eng Med. 224(6):775–788.
- FrickTB, MarucciDD, CartmillJA, MartinCJ, WalshWR. 2001. Resistance forces acting on suture needles. J Biomech. 34(10):1335–1340.
- GaoH, KleinP. 1998. Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds. J Mech Phys Solids. 46(2):187–218.
- GeißlerG, NetzkerC, KaliskeM. 2010. Discrete crack path prediction by an adaptive cohesive crack model. Eng Fract Mech. 77(18):3541–3557, 10.1016/j.engfracmech.2010.04.029.
- HowardMA, AbkesBA, OllendieckMC, NohMD, RitterC, GilliesGT. 1999. Measurement of the force required to move a neurosurgical probe through in vivo human brain tissue. Biomed Eng IEEE Transact. 46(7):891–894.
- KataokaH, WashioT, ChinzeiK, MizuharaK, SimoneC, OkamuraAM. 2002. Measurement of the tip and friction force acting on a needle during penetration. In: Medical Image Computing and Computer-Assisted Intervention – MICCAI 2002. 5th International Conference. Proceedings, Part I. Tokyo, Japan, September. Berlin (Germany): Springer-Verlag. p. 216–223.
- KoSY, DaviesBL, Rodriguez y BaenaF. 2010. Two-dimensional needle steering with a ‘Programmable Bevel’ inspired by nature: modelling preliminaries. In: IEEE/RSJ International Conference on Intelligent RObots and Systems. Taipei, Taiwan, October. Piscataway (NJ): IEEE. p. 2319–2324.
- MisraS, ReedKB, DouglasAS, RameshKT, OkamuraAM. 2008. Needle-tissue interaction forces for bevel-tip steerable needles. In: 2nd IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics, 2008. BioRob 2008. Scottsdale, USA, October. Piscataway (NJ): IEEE. p. 224–231.
- MisraS, ReedKB, SchaferBW, RameshKT, OkamuraAM. 2010. Mechanics of flexible needles robotically steered through soft tissue. Int J Robot Res. 29(13):1640–1660.
- OldfieldM, DiniD, Rodriguez y BaenaF. 2010. Detailed finite element simulations of probe insertion into solid elastic material using a cohesive zone approach. In: 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC2010). Buenos Aires, Argentina, September. Piscataway (NJ): IEEE. p. 3198–3201.
- PannachetT, SluysLJ, AskesH. 2009. Error estimation and adaptivity for discontinuous failure. Int J Num Meth Eng. 78(5):528–563.
- SanfordRJ. 2003. Principles of fracture mechanics. Upper Saddle River, NJ: Prentice Hall.
- ShergoldO, FleckNA. 2004. Mechanisms of deep penetration of soft solids, with application to the injection and wounding of skin. Proceed Royal Soc Lon Series A Math Phys Eng Sci. 460(2050):3037–3058.
- ShergoldOA, FleckNA. 2005. Experimental investigation into the deep penetration of soft solids by sharp and blunt punches, with application to the piercing of skin. Transactions of the ASME. J Biomech Eng. 127(5):838–848.
- SimoneC, OkamuraAM. 2002. Modeling of needle insertion forces for robot-assisted percutaneous therapy. In: Proceedings 2002 IEEE International Conference on Robotics and Automation. Washington, DC, USA, May. Vol. 2. Piscataway (NJ): IEEE. p. 2085–2091.
- SongSH, PaulinoGH, ButtlarWG. 2006. A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material. Eng Fract Mech. 73(18):2829–2848.
- TeradaK, IshiiT, KyoyaT, KishinoY. 2007. Finite cover method for progressive failure with cohesive zone fracture in heterogeneous solids and structures. Comput Mech. 39(2):191–210.
- VincentJFV, KingMJ. 1995. The mechanism of drilling by wood wasp ovipositors. Biomimetics. 3(4):187–201.
- WoodNA, ShahrourK, OstM, RiviereCN. 2010. Needle steering system using duty-cycled rotation for percutaneous kidney access. In: 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC2010). Buenos Aires, Argentina, September. Piscataway (NJ): IEEE. p. 5432–5435.
- ZerbatoD, BaschirottoD, BaschirottoD, BotturiD, FioriniP. 2010. GPU-based physical cut in interactive haptic simulations. Int J Comput Assist Radiol Surg. 6(2):265–272.
- ZhangZ, GeX. 2005. A new quasi-continuum constitutive model for crack growth in an isotropic solid. Europ J Mech A/Solids. 24(2):243–252.