Biomechanical analysis and comparison of 12 dental implant systems using 3D finite element study

References

• AdellR, HanssonBO, BrånemarkPI, BreineU. 1970. Intra-osseous anchorage of dental prostheses. ScandJ Plas Reconstr Surg Hand Surg.4(1):19–34.
   Google Scholar
• AnituaE, OriveG, AguirreJJ, ArdanzaB, AndíaI. 2008. 5-Year clinical experience with BTI dental implants: risk factors for implant failure. J Clin Periodontol. 35(8):724–732.
   PubMed Web of Science ®Google Scholar
• AusielloP, ApicellaA, DavidsonCL, RengoS. 2001. 3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites. J Biomech. 34(10):1269–1277.
   PubMed Web of Science ®Google Scholar
• BaggiL, CappelloniI, MaceriF, VairoG. 2008. Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation. Simul Model Pract Theory.16(8):971–987.
   Web of Science ®Google Scholar
• BozkayaD, MuftuS, MuftuA. 2004. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. J Prosthet Dent. 92(6):523–530.
   PubMed Web of Science ®Google Scholar
• BrocardD, BarthetP, BaysseE, DuffortJF, EllerP, JustumusP, MarinP, OscabyF, SimonetT, BenquéE, BrunelGA, et al. 2000. Multicenter report on 1,022 consecutively placed ITI implants: a 7-year longitudinal study. Int J Oral Maxillofac Implants. 15(5):691–700.
   PubMed Web of Science ®Google Scholar
• BumgardnerJD, BoringJG, CooperRC, GaoC, GivaruangsawatS, GilbertJA, MischCM, StefikDE. 2000. Preliminary evaluation of a new dental implant design in canine models. Implant Dent. 9(3):252–260.
   PubMedGoogle Scholar
• BuserD, Mericske-SternR, BernardJP, BehnekeA, BehnekeN, HirtHP, BelserUC, LangNP. 1997. Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants. Clin Oral Implants Res. 8(3):161–172.
   PubMed Web of Science ®Google Scholar
• CampsJJ, PertotWJ. 1996. Young's modulus of warm and cold gutta-percha. Endod Dent Traumatol. 12(2):50–53.
   PubMedGoogle Scholar
• ClellandNL, lsmailYH, ZakiHS. 1991. Three-dimensional finite element stress analysis in and around the Screw-Vent implant. Int J Oral Maxillofac Implants. 6(4):391–398.
   PubMedGoogle Scholar
• CooperLF. 2010. Factors influencing primary dental implant stability remain unclear. J Evid Based Dent Pract. 10(1):44–45.
   PubMedGoogle Scholar
• Fontijn-TekampFA, SlagterAP, Van Der BiltA, Van 'T HofMA, WitterDJ, KalkW, JansenJA. 2000. Biting and chewing in overdentures, full dentures, and natural dentitions. J Dent Res. 79(7):1519–1524.
   PubMed Web of Science ®Google Scholar
• HolmgrenEP, KilgrenLM, ManteF. 1998. Evaluating parameters of osseointegrated dental implants using finite element analysis – a two-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction. J Oral Implantol. 24(2):80–88.
   PubMedGoogle Scholar
• HuangHL, HsuJT, FuhLJ, LinDJ, ChenMY. 2010. Biomechanical simulation of various surface roughnesses and geometric designs on an immediately loaded dental implant. Comput Biol Med. 40(5):525–532.
   PubMed Web of Science ®Google Scholar
• KongL, SunYY, HuKJ, LiuYP, LiDH, QiuZH, LiuBL. 2008. Selections of the cylinder implant neck taper and implant end fillet for optimal biomechanical properties: a three-dimensional finite element analysis. J Biomech. 41(5):1124–1130.
   PubMed Web of Science ®Google Scholar
• LeeJH, FriasV, LeeKW, WrightRF. 2005. Effect of implant size and shape on implant success rates: a literature review. J Prosthet Dent. 94(4):377–381.
   PubMed Web of Science ®Google Scholar
• NataliAN, PavanPG. 2002. A comparative analysis based on different strength criteria for evaluation of risk factor for dental implants. Comput Methods Biomech Biomed Eng. 5(2):127–133.
   PubMedGoogle Scholar
• OlateS, LyrioMC, MoraesM, MazzonettoR, MoreiraRW. 2010. Influence of diameter and length of implant on early dental implant failure. J Oral Maxillofac Surg. 68(1):414–419.
   PubMed Web of Science ®Google Scholar
• PeraP, BassiF, SchieranoG, AppendinoP, PretiG. 1998. Implant anchored complete mandibular denture: evaluation of masticatory efficiency. Oral function and degree of satisfaction. J Oral Rehabil. 25(6):462–467.
   PubMed Web of Science ®Google Scholar
• QuaresmaSE, CuryPR, SendykWR, SendykCA. 2008. A finite element analysis of two different dental implants: stress distribution in the prosthesis, abutment, implant, and supporting bone. J Oral Implantol. 34(1):1–6.
   PubMedGoogle Scholar
• ReigerMR, AdamsWK, KinzelGL. 1990. A finite element survey of eleven endosseous implants. J Prosthet Dent. 63(4):457–465.
   PubMed Web of Science ®Google Scholar
• SalviGE, BräggerU. 2009. Mechanical and technical risks in implant therapy. Int J Oral Maxillofac Implants. 24(9):69–85.
   PubMed Web of Science ®Google Scholar
• SteigengaJT, ShammariKF, NocitiFH, MischCE, WangHL. 2003. Dental implant design and its relationship to long-term implant success. Implant Dent. 12(4):306–317.
   PubMedGoogle Scholar
• SusarlaSM, ChuangSK, DodsonTB. 2008. Delayed versus immediate loading of implants: survival analysis and risk factors for dental implant failure. J Oral Maxillofac Surg. 66(2):251–255.
   PubMed Web of Science ®Google Scholar
• TestoriT, WisemanL, WoolfeS, PorterSS. 2001. Prospective multicenter clinical study of the osseotite implant: four-year interim report. Int J Oral Maxillofac Implants. 16(2):193–200.
   PubMed Web of Science ®Google Scholar
• WuT, LiaoWH, DaiN, TangC. 2010. Design of accustom angle dabutment for dental implants using computer-aided design and nonlinear finite element analysis. J Biomech. 43(10):1941–1946.
   PubMed Web of Science ®Google Scholar
• YangJ, XiangHJ. 2007. A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone. J Biomech. 40(11):2377–2385.
   PubMed Web of Science ®Google Scholar