References
- Esposito L. 2013. Topology optimization strategies in multi-physics problems [Ph.D. thesis]. Department of Structure for Engineering and Architecture (DiSt), School of Engineering, University of Naples Federico II, Naples, Italy.
- Galante J, Rostoker W, Ray RD. 1970. Physical properties of trabecular bone. Calcif Tissue Res. 5(1):236–246. doi:10.1007/BF02017552.
- Helgason B, Perilli E, Schileo E, Taddei F, Brynjólfsson S, Viceconti M. 2008. Mathematical relationships between bone density and mechanical properties: a literature review. Clin Biomech. 23(2):135–146. doi:10.1016/j.clinbiomech.2007.08.024.
- Hsieh J. 2003. Computed tomography: Principles, design, artifacts, and recent advances. SPIE Press, ISBN 0-8914-4425-1.
- Keller TS. 1994. Predicting the compressive mechanical behavior of bone. J Biomech. 27(9):1159–1168. doi:10.1016/0021-9290(94)90056-6.
- Keyak JH, Fourkas MG, Meagher JM, Skinner HB. 1993. Validation of an automated method of three-dimensional finite element modelling of bone. J Biomed Eng. 15(6):505–509. doi:10.1016/0141-5425(93)90066-8.
- Keyak JH, Lee IY, Skinner HB. 1994. Correlations between orthogonal mechanical properties and density of trabecular bone: use of different densitometric measures. J Biomed Mater Res. 28(11):1329–1336. doi:10.1002/jbm.820281111.
- Keyak JH, Meagher JM, Skinner HB, Mote, Jr, CD. 1990. Automated three-dimensional finite element modelling of bone: a new method. J Biomed Eng. 12(5):389–397. doi:10.1016/0141-5425(90)90022-F.
- Lengsfeld M, Kaminsky J, Merz B, Franke RP. 1996. Sensitivity of femoral strain pattern analyses to resultant and muscle forces at the hip joint. Med Eng Phys. 18(1):70–78. doi:10.1016/1350-4533(95)00033-X.
- Marks LW, Gardner TN. 1993. The use of strain energy as a convergence criterion in the finite element modelling of bone and the effect of model geometry on stress convergence. J Biomed Eng. 15(6):474–476. doi:10.1016/0141-5425(93)90061-3.
- Simões JA, Vaz MA, Blatcher S, Taylor M. 2000. Influence of head constraint and muscle forces on the strain distribution within the intact femur. Med Eng Phys. 22(7):453–459. doi:10.1016/S1350-4533(00)00056-4.
- Steinarsdottir A, Þórbjörnsson ES, Guðmundsson G, Gargiulo P. 2012. CT number calibration and dose assessment. Internal report. Reykjavik: Department of Science – Vísindadeild Lndspitali (LSH) Biomedical Engineering Centre, Reykjavik University and Landspitali.