Advanced search
Publication Cover
Computer Methods in Biomechanics and Biomedical Engineering Volume 21, 2018 - Issue 6
Submit an article Journal homepage
247
Views
0
CrossRef citations to date
0
Altmetric
Article

Optimal pressure comfort design for pilot helmets

Ying XuSchool of Biological Science and Medical Engineering, Beihang University, Beijing, China; View further author information
,
Lian Yun ChenAerospace Life-Support Institute Co., Ltd, Xiangyang, Hubei, ChinaView further author information
,
Hai Bo ZhangAerospace Life-Support Institute Co., Ltd, Xiangyang, Hubei, ChinaView further author information
,
Xin ZhaoSchool of Biological Science and Medical Engineering, Beihang University, Beijing, China; View further author information
,
Yin Sheng TianSchool of Biological Science and Medical Engineering, Beihang University, Beijing, China; View further author information
&
Li DingSchool of Biological Science and Medical Engineering, Beihang University, Beijing, China; Correspondence[email protected]
View further author information
Pages 437-443 | Received 01 Sep 2017, Accepted 16 May 2018, Published online: 16 Jul 2018

References

  • Alemany S, Olaso J, Nacher B, Gil M, Hernández A, Pizá M, Solves C. 2012. A multidimensional approach to the generation of helmets’ design criteria: A preliminar study. Work. 41(Suppl 1):4031–4037.
  • Allen, B and Bastnik. 1982. A method for determining the center of mass of helmets. Technical Report, No.AD-A141633/8, USA Army Natick R&D center, Natick, MA 432–443.
  • Chen X, Dai SL. 2003. Development and application of ergonomic performance testing system for military helmets. China Personal Protective Equipment 2:003.
  • Ghajari M, Peldschus S, Galvanetto U, Asgharpour Z, Iannucci L. 2010. Influence of the body on head rotational acceleration in motorcycle helmet oblique impact tests. IRCOBI Conference - Hanover (Germany) 95–106.
  • Guo J. 1998. Calculation and test of the hitting force of firing bullets on bulletproof helmets. Sys Eng & Elec Tech. 6(6):4–8.
  • Harrison CR, Robinette KM. 2006. Principles of fit to optimize helmet sizing. AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH HUMAN EFFECTIVENESS DIRECTORATE.
  • Jiang W. 2012. Analysis of human head and neck injuries under high-speed impact. Tianjin University of Science & Technology.
  • Liang XD, Zhou H, Dai SL. 2003. Investigation on the comfort of military helmets. Eng Mech. 20(1):96–100.
  • Mills NJ, Wilkes S, Derler S, Flisch A. 2009. FEA of oblique impact tests on a motorcycle helmet. Int J Imp Eng. 36(7):913–925.
  • Mustafa H, Pang T Y, Perret-Ellena T, et al. 2015. Finite Element Bicycle Helmet Models Development [J]. Procedia Technology 20:91–97.
  • Park CH, Jun Y, Kang TJ, Kim JH. 2007. Development of a tool to measure the pressure comfort of a cap (II)—by the analysis of correlation between objective pressure and subjective wearing sensation. Text Res J. 77(7):520–527.
  • Pinnoji PK, Mahajan P. 2010. Analysis of impact-induced damage and delamination in the composite shell of a helmet. Mat. & Des. 31(8):3716–3723.
  • Randall, RB. 1981. An investigation of the effects of the DH-132 helmet7 suspension system upon perceived helmet weight under static conditions. Technical Reports No.AD-A100392, U.S Army Human Engineering Laboratory, Aberdeen Proving Ground, Maryland, Aprill 251–259.
  • Robinette KM, Whitestone JJ. 1992. Methods for characterizing the human for the design of helmets. Wright-patterson Air Force Base 3:397–409.
  • Rueda F, Cui L, Gilchrist MD. 2009. Optimisation of energy absorbing liner for equestrian helmets. Part I: Layered foam liner. Materials & Design 30(9):3405–3413.
  • Rueda M A F, Gilchrist M D. 2012. Computational analysis and design of components of protective helmets [J]. Proceedings of the Institution of Mechanical Engineers Part P Journal of Sports Engineering & Technology 226(P3-4):208–219.
  • Shuaeib FM, Hamouda AMS, Wong SV, Radin Umar RS, Megat Ahmed MMH. 2007. A new motorcycle helmet liner material: The finite element simulation and design of experiment optimization. Materials & design 28(1):182–195.
  • Sun QL, Ma HS. 1998. Experimental study on testing of elastic modulus and Poisson coefficient for human skull. Test Technology and Testing Machine (1):94–95.
  • Yang SJ, Li XX, Liu CH. 2009. Study on quantization of parallax adjustment for HMDs. Elec Opt & Ctrl. 16(5):86–89.
  • Zhao X. 2016. Study and optimal design of pressure comfort for pilot helmets. Beihang University.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.