Calibration of crushable foam plasticity models for synthetic bone material for use in finite element analysis of acetabular cup deformation and primary stability

References

• Adler E, Stuchin SA, Kummer FJ. 1992. Stability of press-fit acetabular cups. J Arthroplasty. 7:295–301.
   PubMedGoogle Scholar
• Antoniades G, Smith EJ, Deakin AH, Wearing SC, Sarungi M. 2013. Primary stability of two uncemented acetabular components of different geometry. Hemispherical or peripherally enhanced? Bone Joint Res. 2:264–269.
   PubMed Web of Science ®Google Scholar
• Baleani M, Fognani R, Toni A. 2001. Initial stability of a cementless acetabular cup design: Experimental investigation on the effect of adding fins to the rim of the cup. Artif Organs. 25:664–669.
   PubMed Web of Science ®Google Scholar
• Calvert KL, Trumble KP, Webster TJ, Kirkpatrick LA. 2010. Characterization of commercial rigid polyurethane foams used as bone analogs for implant testing. J Mater Sci Mater Med. 21:1453–1461.
   PubMed Web of Science ®Google Scholar
• Carter DR, Schwab GH, Spengler DM. 1980. Tensile fracture of cancellous bone. Acta Orthop Scand. 51:733–741.
   PubMed Web of Science ®Google Scholar
• Crosnier EA, Keogh PS, Miles AW. 2014. A novel method to assess primary stability of press-fit acetabular cups. Proc Inst Mech Eng H. 228:1126–1134.
   PubMed Web of Science ®Google Scholar
• D'Antonio JA, Capello WN, Borden LS, Bargar WL, Bierbaum BF, Boettcher WG, Steinberg ME, Stulberg SD, Wedge JH. 1989. Classification and management of acetabular abnormalities in total hip arthroplasty. Clin Orthop Relat Res. 243:126–137.
   PubMed Web of Science ®Google Scholar
• Flores-Johnson EA, Li QM, Mines RAW. 2008. Degradation of elastic modulus of progressively crushable foams in uniaxial compression. J Cell Plast. 44:415–434.
   Web of Science ®Google Scholar
• Fritsche A, Bialek K, Mittelmeier W, Simnacher M, Fethke K, Wree A, Bader R. 2008. Experimental investigations of the insertion and deformation behavior of press-fit and threaded acetabular cups for total hip replacement. J Orthop Sci. 13:240–247.
   PubMed Web of Science ®Google Scholar
• Grant JA, Bishop NE, Götzen N, Sprecher C, Honl M, Morlock MM. 2007. Artificial composite bone as a model of human trabecular bone. The implant–bone interface. J Biomech. 40:1158–1164.
   PubMed Web of Science ®Google Scholar
• Hothi HS, Busfield JJC, Shelton JC. 2011. Explicit finite element modelling of the impaction of metal press-fit acetabular components. Proc Inst Mech Eng H. 225:303–314.
   PubMed Web of Science ®Google Scholar
• Hothi HS, Busfield JJC, Shelton JC. 2014. Deformation of uncemented metal acetabular cups following impaction: Experimental and finite element study. Computer Methods in Biomechanics and Biomedical Engineering. 17:1261–1274.
   PubMed Web of Science ®Google Scholar
• Huber WO, Noble PC. 2014. Effect of design on the initial stability of press-fit cups in the presence of acetabular rim defects: Experimental evaluation of the effect of adding circumferential fins. Int Orthop. 38:725–731.
   PubMed Web of Science ®Google Scholar
• Jin ZM, Meakins S, Morlock MM, Parsons P, Hardaker C, Flett M, Isaac G. 2006. Deformation of press-fitted metallic resurfacing cups. Part 1. Experimental simulation. Proc Inst Mech Eng H. 220:299–309.
   PubMed Web of Science ®Google Scholar
• Kelly, N, McGarry, JP. 2012. Experimental and numerical characterisation of the elastoplastic properties of bovine trabecular bone and a trabecular bone analogue. J Mech Behav Biomed Mater. 9:184–197.
   PubMed Web of Science ®Google Scholar
• Le Cann S, Galland A, Rosa B, Le Corroller T, Pithioux M, Argenson J-N, Chabrand P, Parratte S. 2014. Does surface roughness influence the primary stability of acetabular cups? A numerical and experimental biomechanical evaluation. Med Eng Phys. 36:1185–1190.
   PubMed Web of Science ®Google Scholar
• Li QM, Mines RAW. 2002. Strain measures for rigid crushable foam in uniaxial compression. Strain. 38:132–140.
   Web of Science ®Google Scholar
• Meding JB, Small SR, Jones ME, Berend ME, Ritter MA. 2013. Acetabular cup design influences deformational response in total hip arthroplasty. Clin Orthop Relat Res. 471:403–409.
   PubMed Web of Science ®Google Scholar
• Mines RAW. 2008. On the characterisation of foam and micro-lattice materials used in sandwich construction. Strain. 44:71–83.
   Web of Science ®Google Scholar
• Olory B, Havet E, Gabrion A, Vernois J, Mertl P. 2004. Comparative in vitro assessment of the primary stability of cementless press-fit acetabular cups. Acta Orthop Belg. 70:31–37.
   PubMedGoogle Scholar
• Paprosky WG, Perona PG, Lawrence JM. 1994. Acetabular defect classification and surgical reconstruction in revision arthroplasty. J Arthroplasty. 9:33–44.
   PubMedGoogle Scholar
• Schmidig G, Patel A, Liepins I, Thakore M, Markel DC. 2010. The effects of acetabular cup deformation and liner thickness on frictional torque in ultrahigh-molecular-weight polyethylene acetabular bearings. J Arthroplasty. 25:644–653.
   PubMed Web of Science ®Google Scholar
• Schreiner U, Simnacher M, Scheller G, Scharf H-P. 2007. Der Einfluss von Oberflächenmerkmalen auf die Primärstabilität einer zementfreien Hüftpfanne. Eine mechanische In-vitro-Untersuchung/The influence of different surface treatments on the primary stability of cementless acetabular cups: an in vitro study. Biomed Tech./Biomed Eng. 52:243–247.
   PubMedGoogle Scholar
• Shirazi-Adl A, Dammak M, Paiement G. 1993. Experimental determination of friction characteristics at the trabecular bone/porous-coated metal interface in cementless implants. J Biomed Mater Res. 27:167–175.
   PubMed Web of Science ®Google Scholar
• Small SR, Berend ME, Howard LA, Rogge RD, Buckley CA, Ritter MA. 2013. High initial stability in porous titanium acetabular cups. A biomechanical study. J Arthroplasty. 28:510–516.
   PubMed Web of Science ®Google Scholar
• Souffrant R, Zietz C, Fritsche A, Kluess D, Mittelmeier W, Bader R. 2012. Advanced material modelling in numerical simulation of primary acetabular press-fit cup stability. Comput Methods Biomech Biomed Eng. 15:787–793.
   PubMed Web of Science ®Google Scholar
• Squire M, Griffin WL, Mason JB, Peindl RD, Odum S. 2006. Acetabular component deformation with press-fit fixation. J Arthroplasty. 21:72–77.
   PubMed Web of Science ®Google Scholar
• Szivek JA, Thomas M, Benjamin JB. 1993. Technical note. Characterization of a synthetic foam as a model for human cancellous bone. J Appl Biomater. 4:269–272.
   PubMedGoogle Scholar
• Szivek JA, Thompson JD, Benjamin JB. 1995. Characterization of three formulations of a synthetic foam as models for a range of human cancellous bone types. J Appl Biomater. 6:125–128.
   PubMedGoogle Scholar
• D20 Committee. 2016. Test Method for Compressive Properties of Rigid Cellular Plastics. West Conshohocken, PA: ASTM International (D1621-16). 2016. doi:10.1520/D1621-16
   Google Scholar
• Viceconti M, Olsen S, Nolte L-P, Burton K. 2005. Extracting clinically relevant data from finite element simulations. Clin Biomech (Bristol, Avon). 20:451–454.
   PubMed Web of Science ®Google Scholar
• Wetzel R, Simnacher M, Scheller G. 2005. Initial stability of press-fit acetabular cups-an in-vitro study. Biomed Tech. 50:400–403.
   PubMedGoogle Scholar
• Widmer K-H, Zurfluh B, Morscher EW. 2002. Load transfer and fixation mode of press-fit acetabular sockets. J Arthroplasty. 17:926–935.
   PubMed Web of Science ®Google Scholar
• Yew A, Jin ZM, Donn A, Morlock MM, Isaac G. 2006. Deformation of press-fitted metallic resurfacing cups. Part 2. Finite element simulation. Proc Inst Mech Eng H. 220:311–319.
   PubMed Web of Science ®Google Scholar
• Zietz C, Fritsche A, Kluess D, Mittelmeier W, Bader R. 2009. Einfluss der Formgebung von künstlichen Hüftpfannen auf die primäre Verankerungsfestigkeit. Orthopade. 38:1097–1105.
   PubMed Web of Science ®Google Scholar