A voxel-based method for designing a numerical biomechanical model patient-specific with an anatomical functional approach adapted to additive manufacturing

References

• Arabnejad S, Burnett Johnston R, Pura JA, Singh B, Tanzer M, Pasini D. 2016. High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints Acta Biomater. 30:345–356.
   PubMed Web of Science ®Google Scholar
• ASTM. 2012. Standard terminology for additive manufacturing technologies. West Conshohocken (PA): ASTM International.
   Google Scholar
• Barone S, Casinelli M, Frascaria M, Paoli A, Razionale AV. 2016. Interactive design of dental implant placements through CAD-CAM technologies: from 3D imaging to additive manufacturing. Int J Interact Des Manuf. 10(2):105–117.
   Google Scholar
• Catmull E, Clark J. 1978. Recursively generated B-spline surfaces on arbitrary topological meshes. Comput Aid Des. 10(6):350–355.
   Web of Science ®Google Scholar
• Caudillo M, Herrera-Trejo M, Castro MR, Ramírez E, González CR, Juárez JI. 2002. On carbide dissolution in an as-cast ASTM F-75 alloy. J Biomed Mater Res. 59(2):378–385.
   PubMed Web of Science ®Google Scholar
• Doubrovski EL, Tsai EY, Dikovsky D, Geraedts JMP, Herr H, Oxman N. 2015. Voxel-based fabrication through material property mapping: a design method for bitmap printing. Comput Aid Des. 60:3–13.
   Web of Science ®Google Scholar
• Emmelmann C, Scheinemann P, Munsch M, Seyda V. 2011. Laser additive manufacturing of modified implant surfaces with osseointegrative characteristics. Phys Procedia. 21:375–384.
   Google Scholar
• Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD. 2015. The status, challenges, and future of additive manufacturing in engineering. Comput Aid Des. 69:65–89.
   Web of Science ®Google Scholar
• Jense GJ. 1989. Voxel-based methods for CAD. Comput Aid Des. 21(8):528–533.
   Web of Science ®Google Scholar
• Huang J, Yagel R, Filippov V, Kurzion Y. 1998. An accurate method for voxelizing polygon meshes. IEEE Symposium on Volume Visualization; p. 119–126.
   Google Scholar
• Huang P, Wang C, Chen Y. 2013. Intersection-free and topologically faithful slicing of implicit solid. J Comput Inf Sci Eng. 13(2):021009.
   Web of Science ®Google Scholar
• Huotilainen E, Jaanimets R, Valášek J, Marcián P, Salmi M, Tuomi J, Mäkitie A, Wolff J. 2014. Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process. J Cranio Maxill Surg. 42(5):259–265.
   Web of Science ®Google Scholar
• Kazhdan M, Hoppe H. 2013. Screened Poisson surface reconstruction. ACM Trans Graph. 32(3):1.
   Web of Science ®Google Scholar
• Lethaus B, Poort L, Böckmann R, Smeets R, Tolba R, Kessler P. 2012. Additive manufacturing for microvascular reconstruction of the mandible in 20 patients. J Craniomaxillofac Surg. 40(1):43–46.
   PubMed Web of Science ®Google Scholar
• Liacouras P, Garnes J, Roman N, Petrich A, Grant GT. 2011. Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent. 105(2):78–82.
   PubMed Web of Science ®Google Scholar
• Lorensen WE, Cline HE. 1987. Marching cubes: a high resolution 3D surface construction algorithm. ACM Siggraph Computer Graphics.
   Google Scholar
• Mäntylä M. 1987. An introduction to solid modeling. New York (NY): Computer Science Press, Inc.
   Google Scholar
• Mohammed MI, Cadd B, Peart G, Gibson I. 2018. Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes. Virtual Phys Prototyp. 13(3):164–176.
   Web of Science ®Google Scholar
• Pradel P, Zhu Z, Bibb R, Moultrie J. 2018. Investigation of design for additive manufacturing in professional design practice. J Eng Des. 29(4–5):165–200.
   Web of Science ®Google Scholar
• Rengier F, Mehndiratta A, von Tengg-Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor H-U, Giesel FL. 2010. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 5(4):335–341.
   PubMed Web of Science ®Google Scholar
• Sobierajski L, Cohen D, Kaufman A, Yagel R, Acker DE. 1993. A fast display method for volumetric data. Visual Comput. 10(2):116–124.
   Google Scholar
• Taniguchi N, Fujibayashi S, Takemoto M, Sasaki K, Otsuki B, Nakamura T, Matsushita T, Kokubo T, Matsuda S. 2016. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: an in vivo experiment. Mater Sci Eng. 59:690–701.
   Google Scholar
• Taubin G. 1995. Curve and surface smoothing without shrinkage. IEEE International Conference on Computer Vision; p. 852–857.
   Google Scholar
• Tiede U, Schiemann T, Hohne KH. 1998. High quality rendering of attributed volume data. Visualization’98. Proceedings of IEEE Conference on Visualization.
   Google Scholar
• Tunchel S, Blay A, Kolerman R, Mijiritsky E, Shibli JA. 2016. 3D printing/additive manufacturing single titanium dental implants: a prospective multicenter study with 3 years of follow-up. Int J Dent. 2016:1–9.
   Google Scholar
• Wang X, Xu S, Zhou S, Xu W, Leary M, Choong P, Qian M, Brandt M, Xie YM. 2016. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review. Biomaterials. 83:127–141.
   PubMed Web of Science ®Google Scholar
• Zadpoor AA, Malda J. 2017. Additive manufacturing of biomaterials, tissues, and organs. Ann Biomed Eng. 45(1):1–11.
   PubMed Web of Science ®Google Scholar