Biomechanical performance design of joint prosthesis for medical rehabilitation via generative structure optimization

References

• Aziz R, Ul Haq MI, Raina A. 2020. Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA). Polym Test. 85:106434.
   Web of Science ®Google Scholar
• Barrack RL, Booth RE, Lonner JH, McCarthy JC, Mont MA, Rubash HE. 2006. Orthopaedic knowledge update: hip and knee reconstruction. vol. 3. American Academy of Orthopaedic.
   Google Scholar
• Bian P, Shao X, Du J. 2019. Finite element analysis of thermal stress and thermal deformation in typical part during. SLM Appl Sci. 9(11):2231.
   Google Scholar
• Cengiz IF, Pitikakis M, Cesario L, Parascandolo P, Vosilla L, Viano G, Oliveira JM, Reis RL. 2016. Building the basis for patient-specific meniscal scaffolds: from human knee MRI to fabrication of 3D printed scaffolds. Bioprinting. 1/2:1–10.
   Google Scholar
• Charles A, Elkaseer A, Thijs L, Hagenmeyer V, Scholz S. 2019. Effect of process parameters on the generated surface roughness of down-facing surfaces in selective laser melting. Appl Sci. 9(6):1256.
   Google Scholar
• Choudhury D, Vrbka M, Mamat AB, Stavness I, Roy CK, Mootanah R, Krupka I. 2017. The impact of surface and geometry on coefficient of friction of artificial hip joints. J Mech Behav Biomed Mater. 72:192–199.
   PubMed Web of Science ®Google Scholar
• Cloonan AJ, Shahmirzadi D, Li RX, Doyle BJ, Konofagou EE, McGloughlin TM. 2014. 3D-Printed tissue-mimicking phantoms for medical imaging and computational validation applications. 3D Print Addit Manuf. 1(1):14–23.
   PubMedGoogle Scholar
• de Souza Batista VE, Verri FR, Almeida D. A d F, Santiago Junior JF, Lemos CAA, Pellizzer EP. 2017. Finite element analysis of implant-supported prosthesis with pontic and cantilever in the posterior maxilla. Comput Methods Biomech Biomed Engin. 20(6):663–670.
   PubMed Web of Science ®Google Scholar
• Du Plessis A, Le Roux SG, Booysen G, Els J. 2016. Quality Control of a Laser Additive Manufactured Medical Implant by X-Ray Tomography. 3D Print Addit Manuf. 3(3):175–182.
   Google Scholar
• Farouki RT, Koenig T, Tarabanis KA, Korein JU, Batchelder JS. 1995. Path planning with offset curves for layered fabrication processes. J Manuf Syst. 14(5):355–368.
   Web of Science ®Google Scholar
• Flesher SN, Collinger JL, Foldes ST, Weiss JM, Downey JE, Tyler-Kabara EC, Bensmaia SJ, Schwartz AB, Boninger ML, Gaunt RA. 2016. Intracortical microstimulation of human somatosensory cortex. Sci Transl Med. 8(361):361ra141ra141.
   PubMed Web of Science ®Google Scholar
• Geethanjali P. 2016. Myoelectric control of prosthetic hands: state-of-the-art review. Med Devices (Auckl)). 9:247–255.
   PubMedGoogle Scholar
• Gu W, Pandy MG. 2020. Direct validation of human knee-joint contact mechanics derived from subject-specific finite-element models of the tibiofemoral and patellofemoral joints. J Biomech Eng. 142(071001) (10 pages).
   Google Scholar
• Hussin MS, Fernandez J, Ramezani M, Kumar P, Kelly PA. 2020. Analytical and computational sliding wear prediction in a novel knee implant: a case study. Comput Methods Biomech Biomed Engin. 23(4):143–154.
   PubMed Web of Science ®Google Scholar
• Jiang P, Cui J, Chen Z, Dai Z, Zhang Y, Yi G. 2020. Biomechanical study of medial meniscus after posterior horn injury: a finite element analysis. Comput Methods Biomech Biomed Engin. 23(4):127–137.
   PubMed Web of Science ®Google Scholar
• Kaya G, Yildiz F, Hacisalihoğlu İ. 2019. Characterization of the Structural and Tribological Properties of Medical Ti6Al4V Alloy Produced in Different Production Parameters Using Selective Laser Melting. 3D Print Addit Manuf. 6(5):253–261.
   Google Scholar
• Koizumi Y, Okazaki A, Chiba A, Kato T, Takezawa A. 2016. Cellular lattices of biomedical Co-Cr-Mo-alloy fabricated by electron beam melting with the aid of shape optimization. Addit Manuf. 12:305–313.
   Web of Science ®Google Scholar
• Kotz R, Windhager R, Dominkus M, Robioneck B, Müller-Daniels H. 2000. A self-extending paediatric leg implant. Nature. 406(6792):143–144.
   PubMedGoogle Scholar
• Kubíček M, Florian Z. 2009. Stress strain analysis of knee joint. Engineering Mechanics. 16:315–322.
   Google Scholar
• Kulkarni P, Dutta D. 1996. An accurate slicing procedure for layered manufacturing. Comput-Aided Des. 28(9):683–697.
   Web of Science ®Google Scholar
• Kumar KCN, Tandon T, Silori P, Shaikh A. 2015. Biomechanical Stress Analysis of a Human Femur Bone Using ANSYS. Mater Today: Proc. 2(4-5):2115–2120.
   Google Scholar
• Liu W, Shao Z, Rai S, Hu B, Wu Q, Hu H, Zhang S, Wang B. 2020. Three-dimensional-printed intercalary prosthesis for the reconstruction of large bone defect after joint-preserving tumor resection. J Surg Oncol. 121(3):570–577.
   PubMed Web of Science ®Google Scholar
• Liverani E, Fortunato A, Leardini A, Belvedere C, Siegler S, Ceschini L, Ascari A. 2016. Fabrication of Co–Cr–Mo endoprosthetic ankle devices by means of Selective Laser Melting (SLM). Mater Des. 106:60–68.
   Web of Science ®Google Scholar
• Minetto R, Volpato N, Stolfi J, Gregori R, da Silva M. 2017. An optimal algorithm for 3D triangle mesh slicing. Comput-Aided Des. 92:1–10.
   Web of Science ®Google Scholar
• Niedernhuber M, Barone DG, Lenggenhager B. 2018. Prostheses as extensions of the body: Progress and challenges. Neurosci Biobehav Rev. 92:1–6.
   PubMed Web of Science ®Google Scholar
• Peña E, Calvo B, Martínez MA, Palanca D, Doblaré M. 2005. Finite element analysis of the effect of meniscal tears and meniscectomies on human knee biomechanics. Clin Biomech (Bristol, Avon). 20(5):498–507.
   PubMed Web of Science ®Google Scholar
• Penrose JM, Holt GM, Beaugonin M, Hose DR. 2002. Development of an accurate three-dimensional finite element knee model. Comput Methods Biomech Biomed Engin. 5(4):291–300.
   PubMedGoogle Scholar
• Prochor P, Sajewicz E. 2018. A comparative analysis of internal bone remodelling concepts in a novel implant for direct skeletal attachment of limb prosthesis evaluation: A finite element analysis. Proc Inst Mech Eng H. 232(3):289–298.
   PubMed Web of Science ®Google Scholar
• Qin L, Feng X, Hafezi M, Zhang Y, Guo J, Dong G, Qin Y. 2018. Investigating the tribological and biological performance of covalently grafted chitosan coatings on Co–Cr–Mo alloy. Tribol Int. 127:302–312.
   Web of Science ®Google Scholar
• Şenalp AZ, Akgün G, Canpolat C, Öktem AS. Kalbaran Ö. 2014. Design and Optimization of Sinusoidal Formed Femur Prosthesis. J Nat Appl Sci. 18:123–134.
   Google Scholar
• Shriram D, Praveen Kumar G, Cui F, Lee YHD, Subburaj K. 2017. Evaluating the effects of material properties of artificial meniscal implant in the human knee joint using finite element analysis. Sci Rep. 7(1):6011
   PubMedGoogle Scholar
• Tata K, Fadel G, Bagchi A, Aziz N. 1998. Efficient slicing for layered manufacturing. Rapid Prototyp J. 4(4):151–167.
   Web of Science ®Google Scholar
• Toti P, Marconcini S, Enrica G, Pedretti G, Barone A, Covani U. 2018. The influence of prosthesis design on the outcomes of tooth implants immediately placed and loaded by means of one-piece titanium machined restoration. J Oral Implantol. 44(2):87–93.
   PubMed Web of Science ®Google Scholar
• Vairis A, Stefanoudakis G, Petousis M, Vidakis N, Tsainis AM, Kandyla B. 2016. Evaluation of an intact, an ACL-deficient, and a reconstructed human knee joint finite element model. Comput Methods Biomech Biomed Engin. 19(3):263–270.
   PubMed Web of Science ®Google Scholar
• Xu JH, Chen XJ, Zhang SY, Chen QY, Gou HW, Tan JR. 2017. Thermal design of large plate-fin heat exchanger for cryogenic air separation unit based on multiple dynamic equilibriums. Appl Therm Eng. 113:774–790.
   Web of Science ®Google Scholar
• Xu JH, Wang K, Sheng HS, Gao MY, Zhang SY, Tan JR. 2020. Energy efficiency optimization for ecological 3D printing based on adaptive multi-layer customization. J Cleaner Prod. 245:118826.
   Web of Science ®Google Scholar
• Xu JH, Wang TT, Zhang SY, Tan JR. 2018. Energy-Efficient Enhancement for Viscoelastic Injection Rheomolding Using Hierarchy Orthogonal Optimization. Math Prob Eng. 2018:1–20.
   Web of Science ®Google Scholar